FCC ID MMA901115

110W REMOTE MOUNT MOBILE RADIO

by Midland Radio Corporation

Grantee Code: MMA   Product Code: 901115
Latest application date: 2012-02-21

FCC ID Device Details

FCC IDMMA901115
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeMMA
Product Code901115
Applicant BusinessMidland Radio Corporation 🇺🇸
Related Domains midlandradio.com
Equipment Class110W REMOTE MOUNT MOBILE RADIO
Test FirmTimco Engineering, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
136-174 MHzClass II permissive change or modification of presently authorized equipment2012-02-21
136-174 MHzOriginal Equipment2008-11-17

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2008-11-17PDF 923.7 KB
Internal PhotosInternal Photos2008-11-17PDF 1.4 MB
External PhotosExternal Photos2008-11-17PDF 706.2 KB
Label LocationID Label/Location Info2008-11-17PDF 394.3 KB
Label SampleID Label/Location Info2008-11-17PDF 383.3 KB
Test Setup PhotosTest Setup Photos2008-11-17PDF 977 KB
Test ReportTest Report2012-02-21PDF 135.4 KB
Test ReportTest Report2008-11-17PDF 333.7 KB
Cover LetterCover Letter(s)2012-02-21PDF 55.4 KB
POACover Letter(s)2012-02-21PDF 30.7 KB
Confidential LetterCover Letter(s)2008-11-17PDF 46.6 KB
Justification LetterCover Letter(s)2008-11-17PDF 11.2 KB
Adjustment ProcedureParts List/Tune Up Info2008-11-17PDF 22.9 KB
Parts ListParts List/Tune Up Info2008-11-17PDF 25.2 KB
RF ExposureRF Exposure Info2008-11-17PDF 49.4 KB
Tune Up ProcedureParts List/Tune Up Info2008-11-17PDF 9.9 KB

Application Information

Application IDQetQ01UNgI5/WI5MdnWeKQ==
Final Action Date2012-02-21
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0005867551
Model901115
Frequency Range136-174 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device Description110W REMOTE MOUNT MOBILE RADIO
Responsible PartyJeff Brame, Director of Engineering, jbrame@midlandradio.com , 816 241-8500
Test FirmSid Sanders, Timco Engineering, Inc., tei@timcoengr.com , 352-472-5500
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power is conducted. This device must be restricted for work related operations in an Occupational/Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end-users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum separation distances of 56cm from all persons, must not be co-located or operating in conjunction with any other antenna or transmitter, and must not exceed an antenna gain of 3 dBi. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. Class II permissive change: This change adds the emission designators for P25 modulation. NOTE 1: 11K0F1D, 11K0F2D, 11K0F3E, 16K0F3E, 8K10F1D, 8K10F1E

Applications

Application IDDatePurpose
QetQ01UNgI5/WI5MdnWeKQ==2012-02-21Class II permissive change or modification of presently authorized equipment
BFBt79yAbovrEJrdwcJbuQ==2008-11-17Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
136-174 MHz1102.5ppm11K0F1D9EF
136-174 MHz1102.5ppmNOTE 19EF
136-174 MHz1102.5ppm11K0F2D9EF
136-174 MHz102.5ppmNOTE 19EF
136-174 MHz1102.5ppm11K0F3E9EF
136-174 MHz1102.5ppm16K0F3E9EF
136-174 MHz102.5ppm11K0F1D9EF
136-174 MHz102.5ppm11K0F2D9EF
136-174 MHz102.5ppm11K0F3E9EF
136-174 MHz102.5ppm16K0F3E9EF

Grants

TCB Grant - Application QetQ01UNgI5/WI5MdnWeKQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 02/21/2012

Application Dated: 02/21/2012
Midland Radio Corporation
5900 Parretta Drive
Kansas City, MO 64120-2134
 
Attention: Jeff Brame , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MMA901115
Name of Grantee:  Midland Radio Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 110W REMOTE MOUNT MOBILE RADIO
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF 90 136.0  -  174.0 110.0 2.5  PM NOTE 1
EF 90 136.0  -  174.0 10.0 2.5  PM NOTE 1

Output Power is conducted. This device must be restricted for work related operations in an Occupational/Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end-users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum separation distances of 56cm from all persons, must not be co-located or operating in conjunction with any other antenna or transmitter, and must not exceed an antenna gain of 3 dBi. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

Class II permissive change: This change adds the emission designators for P25 modulation.

NOTE 1: 11K0F1D, 11K0F2D, 11K0F3E, 16K0F3E, 8K10F1D, 8K10F1E


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application QetQ01UNgI5/WI5MdnWeKQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Midland Radio Corporation
5900 Parretta Drive
Kansas City, MO 64120-2134
United States
  Date of Grant: 02/21/2012

Application Dated: 02/21/2012
 
Attention: Jeff Brame , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MMA901115
Name of Grantee:  Midland Radio Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 110W REMOTE MOUNT MOBILE RADIO
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF 90 136.0  -  174.0 110.0 2.5  PM NOTE 1
EF 90 136.0  -  174.0 10.0 2.5  PM NOTE 1

Output Power is conducted. This device must be restricted for work related operations in an Occupational/Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end-users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum separation distances of 56cm from all persons, must not be co-located or operating in conjunction with any other antenna or transmitter, and must not exceed an antenna gain of 3 dBi. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

Class II permissive change: This change adds the emission designators for P25 modulation.

NOTE 1: 11K0F1D, 11K0F2D, 11K0F3E, 16K0F3E, 8K10F1D, 8K10F1E


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application BFBt79yAbovrEJrdwcJbuQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 11/17/2008

Application Dated: 11/14/2008
Midland Radio Corporation
5900 Parretta Drive
Kansas City, MO 64120-2134
 
Attention: Jeff Brame , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MMA901115
Name of Grantee:  Midland Radio Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 110W Remote Mount Mobile Radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF 90 136.0  -  174.0 110.0 2.5  PM 11K0F1D
EF 90 136.0  -  174.0 110.0 2.5  PM 11K0F2D
EF 90 136.0  -  174.0 110.0 2.5  PM 11K0F3E
EF 90 136.0  -  174.0 110.0 2.5  PM 16K0F3E
EF 90 136.0  -  174.0 10.0 2.5  PM 11K0F1D
EF 90 136.0  -  174.0 10.0 2.5  PM 11K0F2D
EF 90 136.0  -  174.0 10.0 2.5  PM 11K0F3E
EF 90 136.0  -  174.0 10.0 2.5  PM 16K0F3E

Output Power is conducted. This device must be restricted for work related operations in an Occupational/Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end-users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum separation distances of 56cm from all persons, must not be co-located or operating in conjunction with any other antenna or transmitter, and must not exceed an antenna gain of 3 dBi. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application BFBt79yAbovrEJrdwcJbuQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Midland Radio Corporation
5900 Parretta Drive
Kansas City, MO 64120-2134
United States
  Date of Grant: 11/17/2008

Application Dated: 11/14/2008
 
Attention: Jeff Brame , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MMA901115
Name of Grantee:  Midland Radio Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 110W Remote Mount Mobile Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF 90 136.0  -  174.0 110.0 2.5  PM 11K0F1D
EF 90 136.0  -  174.0 110.0 2.5  PM 11K0F2D
EF 90 136.0  -  174.0 110.0 2.5  PM 11K0F3E
EF 90 136.0  -  174.0 110.0 2.5  PM 16K0F3E
EF 90 136.0  -  174.0 10.0 2.5  PM 11K0F1D
EF 90 136.0  -  174.0 10.0 2.5  PM 11K0F2D
EF 90 136.0  -  174.0 10.0 2.5  PM 11K0F3E
EF 90 136.0  -  174.0 10.0 2.5  PM 16K0F3E

Output Power is conducted. This device must be restricted for work related operations in an Occupational/Controlled RF exposure environment, not exceeding a maximum transmitting duty cycle factor of 50%. All qualified end-users of this device must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum separation distances of 56cm from all persons, must not be co-located or operating in conjunction with any other antenna or transmitter, and must not exceed an antenna gain of 3 dBi. A label, as described in this filing, must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

Mail To: