FCC ID MMA911060B

60 WATT VHF BASE STATION

by Midland Radio Corporation

Grantee Code: MMA   Product Code: 911060B
Latest application date: 2011-10-10

FCC ID Device Details

FCC IDMMA911060B
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeMMA
Product Code911060B
Applicant BusinessMidland Radio Corporation 🇺🇸
Related Domains midlandradio.com
Equipment Class60 WATT VHF BASE STATION
Test FirmTimco Engineering, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
146-174 MHzClass II permissive change or modification of presently authorized equipment2011-10-10
146-174 MHzClass II permissive change or modification of presently authorized equipment2007-03-12
150-174 MHzOriginal Equipment2006-12-05

Exhibits

DocumentTypeAvailableFile
users manualUsers Manual2006-12-05PDF 172.7 KB
internal photosInternal Photos2006-12-05PDF 1.5 MB
external photosExternal Photos2006-12-05PDF 123.2 KB
label locationID Label/Location Info2006-12-05PDF 35 KB
label sampleID Label/Location Info2006-12-05PDF 14.1 KB
test setup photosTest Setup Photos2006-12-05PDF 298 KB
test reportTest Report2006-12-05PDF 343.8 KB
Cover LetterCover Letter(s)2011-10-10PDF 56.4 KB
POACover Letter(s)2011-10-10PDF 30.7 KB
COVER LETTERCover Letter(s)2007-03-12PDF 49.4 KB
JUSTIFICATION LETTERCover Letter(s)2007-03-12PDF 49.4 KB
request for confidentialityCover Letter(s)2006-12-05PDF 76.6 KB
parts listsParts List/Tune Up Info2006-12-05PDF 16.8 KB
tune up informationParts List/Tune Up Info2006-12-05PDF 11.5 KB
block diagram Metadata onlyBlock DiagramPDF 45.1 KB
schematics 1 Metadata onlySchematicsPDF 34.7 KB
schematics 2 Metadata onlySchematicsPDF 105.8 KB
schematics 3 Metadata onlySchematicsPDF 206.9 KB
schematics 4 Metadata onlySchematicsPDF 90.3 KB
schematics 5 Metadata onlySchematicsPDF 387.3 KB
operational description Metadata onlyOperational DescriptionPDF 14.7 KB

Application Information

Application IDt0NZ+PaxMjTP9NLE41pBPg==
Final Action Date2011-10-10
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0005867551
Model911060B
Frequency Range146-174 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device Description60 WATT VHF BASE STATION
Responsible PartyJeff Brame, Director of Engineering, jbrame@midlandradio.com , 816 241-8500
Test FirmSid Sanders, Timco Engineering, Inc., tei@timcoengr.com , 352-472-5500
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak radiated output power must not exceed 250 Watts EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. Class II Change (2011): To add correct emission designators of P25 modulation. NOTE 1: 11K0F3E, 11K0F2D, 8K10F1D, 8K10F1E, 16K0F3E

Applications

Application IDDatePurpose
t0NZ+PaxMjTP9NLE41pBPg==2011-10-10Class II permissive change or modification of presently authorized equipment
ksaT39oGGB13uIepxBe3xA==2007-03-12Class II permissive change or modification of presently authorized equipment
ceezgyhXdqV8CQiT7AeJuQ==2006-12-05Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
146-174 MHz601.5ppm11K0F3E9
146-174 MHz60.00000001.5000000000ppmNOTE 190
146-174 MHz601.5ppm11K0F2D9
146-174 MHz601.5ppm11K0F1D9
146-174 MHz601.5ppm11K0F1E9
146-174 MHz601.5ppm16K0F3E9
150-174 MHz601.5ppm11K0F3E9
150-174 MHz601.5ppm11K0F2D9
150-174 MHz601.5ppm11K0F1D9
150-174 MHz601.5ppm11K0F1E9
150-174 MHz601.5ppm16K0F3E9

Grants

TCB Grant - Application t0NZ+PaxMjTP9NLE41pBPg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 10/10/2011

Application Dated: 10/07/2011
Midland Radio Corporation
5900 Parretta Drive
Kansas City, MO 64120-2134
 
Attention: Jeff Brame , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MMA911060B
Name of Grantee:  Midland Radio Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 60 WATT VHF BASE STATION
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 146.0  -  174.0 60.0 1.5  PM NOTE 1

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak radiated output power must not exceed 250 Watts EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

Class II Change (2011): To add correct emission designators of P25 modulation.

NOTE 1: 11K0F3E, 11K0F2D, 8K10F1D, 8K10F1E, 16K0F3E


EAS Grant - Application t0NZ+PaxMjTP9NLE41pBPg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Midland Radio Corporation
5900 Parretta Drive
Kansas City, MO 64120-2134
United States
  Date of Grant: 10/10/2011

Application Dated: 10/07/2011
 
Attention: Jeff Brame , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MMA911060B
Name of Grantee:  Midland Radio Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 60 WATT VHF BASE STATION
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 146.0  -  174.0 60.0 1.5  PM NOTE 1

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak radiated output power must not exceed 250 Watts EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

Class II Change (2011): To add correct emission designators of P25 modulation.

NOTE 1: 11K0F3E, 11K0F2D, 8K10F1D, 8K10F1E, 16K0F3E



TCB Grant - Application ksaT39oGGB13uIepxBe3xA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 03/12/2007

Application Dated: 03/12/2007
Midland Radio Corporation
5900 Parretta Drive
Kansas City, MO 64120-2134
 
Attention: Jeff Brame , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MMA911060B
Name of Grantee:  Midland Radio Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 60 WATT VHF BASE STATION
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 146.0  -  174.0 60.0 1.5  PM 11K0F3E
90 146.0  -  174.0 60.0 1.5  PM 11K0F2D
90 146.0  -  174.0 60.0 1.5  PM 11K0F1D
90 146.0  -  174.0 60.0 1.5  PM 11K0F1E
90 146.0  -  174.0 60.0 1.5  PM 16K0F3E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak radiated output power must not exceed 250 Watts EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

EAS Grant - Application ksaT39oGGB13uIepxBe3xA==

TYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dtd">
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Midland Radio Corporation
5900 Parretta Drive
Kansas City, MO 64120-2134
United States
  Date of Grant: 03/12/2007

Application Dated: 03/12/2007
 
Attention: Jeff Brame , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MMA911060B
Name of Grantee:  Midland Radio Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 60 WATT VHF BASE STATION
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 146.0  -  174.0 60.0 1.5  PM 11K0F3E
90 146.0  -  174.0 60.0 1.5  PM 11K0F2D
90 146.0  -  174.0 60.0 1.5  PM 11K0F1D
90 146.0  -  174.0 60.0 1.5  PM 11K0F1E
90 146.0  -  174.0 60.0 1.5  PM 16K0F3E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak radiated output power must not exceed 250 Watts EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of 1.1307(b)(3), for satisfying RF exposure compliance.



Mail To:


EA741247

TCB Grant - Application ceezgyhXdqV8CQiT7AeJuQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/05/2006

Application Dated: 12/05/2006
Midland Radio Corporation
5900 Parretta Drive
Kansas City, MO 64120-2134
 
Attention: Butch Rittmann , Director of Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MMA911060B
Name of Grantee:  Midland Radio Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 60 Watt VHF Base Station
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 150.0  -  174.0 60.0 1.5  PM 11K0F3E
90 150.0  -  174.0 60.0 1.5  PM 11K0F2D
90 150.0  -  174.0 60.0 1.5  PM 11K0F1D
90 150.0  -  174.0 60.0 1.5  PM 11K0F1E
90 150.0  -  174.0 60.0 1.5  PM 16K0F3E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak radiated output power must not exceed 250 Watts EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.


EAS Grant - Application ceezgyhXdqV8CQiT7AeJuQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Midland Radio Corporation
5900 Parretta Drive
Kansas City, MO 64120-2134
United States
  Date of Grant: 12/05/2006

Application Dated: 12/05/2006
 
Attention: Butch Rittmann , Director of Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MMA911060B
Name of Grantee:  Midland Radio Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: 60 Watt VHF Base Station
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 150.0  -  174.0 60.0 1.5  PM 11K0F3E
90 150.0  -  174.0 60.0 1.5  PM 11K0F2D
90 150.0  -  174.0 60.0 1.5  PM 11K0F1D
90 150.0  -  174.0 60.0 1.5  PM 11K0F1E
90 150.0  -  174.0 60.0 1.5  PM 16K0F3E

Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak radiated output power must not exceed 250 Watts EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.



Mail To: