FCC ID MMA917100B

BASE STATION/REPEATER

by Midland Radio Corporation

Grantee Code: MMA   Product Code: 917100B
Latest application date: 2011-10-10

FCC ID Device Details

FCC IDMMA917100B
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeMMA
Product Code917100B
Applicant BusinessMidland Radio Corporation 🇺🇸
Related Domains midlandradio.com
Equipment ClassBASE STATION/REPEATER
Test FirmTimco Engineering, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
792-806 MHzClass II permissive change or modification of presently authorized equipment2011-10-10
792-806 MHzOriginal Equipment2009-08-19

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2009-08-19PDF 323.7 KB
Internal PhotosInternal Photos2009-08-19PDF 4.6 MB
External PhotosExternal Photos2009-08-19PDF 351.2 KB
Label LocationID Label/Location Info2009-08-19PDF 620.8 KB
Model LabelID Label/Location Info2009-08-19PDF 7.9 KB
Test Setup PhotosTest Setup Photos2009-08-19PDF 2.8 MB
Test ReportTest Report2009-08-19PDF 651.5 KB
Test Report RevisedTest Report2009-08-19PDF 654.7 KB
Cover LetterCover Letter(s)2011-10-10PDF 56.4 KB
POACover Letter(s)2011-10-10PDF 30.7 KB
Confidential RequestCover Letter(s)2009-08-19PDF 139.1 KB
Alignment ProceudresParts List/Tune Up Info2009-08-19PDF 63.6 KB
List of SemiconductorParts List/Tune Up Info2009-08-19PDF 60.9 KB
RF ExposureRF Exposure Info2009-08-19PDF 20.5 KB

Application Information

Application IDmD2Q/gyHJgcvmicDp2RC/w==
Final Action Date2011-10-10
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0005867551
Model917100B
Frequency Range792-806 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionBASE STATION/REPEATER
Responsible PartyJeff Brame, Director of Engineering, jbrame@midlandradio.com , 816 241-8500
Test FirmSid Sanders, Timco Engineering, Inc., tei@timcoengr.com , 352-472-5500
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is peak conducted output power. The antenna(s) used for this transmitter must be fixed-mounted on an outdoor permanent structure with a separation distance of at least 2 m from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions to comply with the MPE limit and requirements. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. Output power is continuously variable from 25 Watts to the maximum value listed. Class II Change (2011): To correct emission designators of P25 modulation. NOTE 1: 11K2F3E, 8K10F1D, 11K2F2D, 8K10F1E, 16K0F3E, 16K0F1D, 16K0F2D, 16K0F1E

Applications

Application IDDatePurpose
mD2Q/gyHJgcvmicDp2RC/w==2011-10-10Class II permissive change or modification of presently authorized equipment
Tp/bhWJgSDstGX659p62uQ==2009-08-19Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
792-806 MHz1002.5ppmNOTE 19
792-806 MHz252.5ppm11K2F1E9
792-806 MHz1002.5ppm16K0F1D9
792-806 MHz252.5ppm16K0F1D9
792-806 MHz1002.5ppm16K0F2D9
792-806 MHz252.5ppm16K0F2D9
792-806 MHz1002.5ppm16K0F1E9
792-806 MHz252.5ppm16K0F1E9
792-806 MHz252.5ppmNOTE 19
792-806 MHz252.5ppm16K0F3E9
792-806 MHz1002.5ppm11K2F3E9
792-806 MHz252.5ppm11K2F3E9
792-806 MHz1002.5ppm11K2F1D9
792-806 MHz252.5ppm11K2F1D9
792-806 MHz1002.5ppm11K2F2D9
792-806 MHz252.5ppm11K2F2D9
792-806 MHz1002.5ppm11K2F1E9

Grants

TCB Grant - Application Tp/bhWJgSDstGX659p62uQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 08/19/2009

Application Dated: 08/18/2009
Midland Radio Corporation
5900 Parretta Drive
Kansas City, MO 64120-2134
 
Attention: Jeff Brame , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MMA917100B
Name of Grantee:  Midland Radio Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: BASE STATION/REPEATER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 792.0  -  806.0 100.0 2.5  PM 16K0F3E
90 792.0  -  806.0 25.0 2.5  PM 16K0F3E
90 792.0  -  806.0 100.0 2.5  PM 11K2F3E
90 792.0  -  806.0 25.0 2.5  PM 11K2F3E
90 792.0  -  806.0 100.0 2.5  PM 11K2F1D
90 792.0  -  806.0 25.0 2.5  PM 11K2F1D
90 792.0  -  806.0 100.0 2.5  PM 11K2F2D
90 792.0  -  806.0 25.0 2.5  PM 11K2F2D
90 792.0  -  806.0 100.0 2.5  PM 11K2F1E
90 792.0  -  806.0 25.0 2.5  PM 11K2F1E
90 792.0  -  806.0 100.0 2.5  PM 16K0F1D
90 792.0  -  806.0 25.0 2.5  PM 16K0F1D
90 792.0  -  806.0 100.0 2.5  PM 16K0F2D
90 792.0  -  806.0 25.0 2.5  PM 16K0F2D
90 792.0  -  806.0 100.0 2.5  PM 16K0F1E
90 792.0  -  806.0 25.0 2.5  PM 16K0F1E

Power listed is peak conducted output power. The antenna(s) used for this transmitter must be fixed-mounted on an outdoor permanent structure with a separation distance of at least 2 m from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions to comply with the MPE limit and requirements. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

Output power is continuously variable from 25 Watts to the maximum value listed.


EAS Grant - Application Tp/bhWJgSDstGX659p62uQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Midland Radio Corporation
5900 Parretta Drive
Kansas City, MO 64120-2134
United States
  Date of Grant: 08/19/2009

Application Dated: 08/18/2009
 
Attention: Jeff Brame , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MMA917100B
Name of Grantee:  Midland Radio Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: BASE STATION/REPEATER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 792.0  -  806.0 100.0 2.5  PM 16K0F3E
90 792.0  -  806.0 25.0 2.5  PM 16K0F3E
90 792.0  -  806.0 100.0 2.5  PM 11K2F3E
90 792.0  -  806.0 25.0 2.5  PM 11K2F3E
90 792.0  -  806.0 100.0 2.5  PM 11K2F1D
90 792.0  -  806.0 25.0 2.5  PM 11K2F1D
90 792.0  -  806.0 100.0 2.5  PM 11K2F2D
90 792.0  -  806.0 25.0 2.5  PM 11K2F2D
90 792.0  -  806.0 100.0 2.5  PM 11K2F1E
90 792.0  -  806.0 25.0 2.5  PM 11K2F1E
90 792.0  -  806.0 100.0 2.5  PM 16K0F1D
90 792.0  -  806.0 25.0 2.5  PM 16K0F1D
90 792.0  -  806.0 100.0 2.5  PM 16K0F2D
90 792.0  -  806.0 25.0 2.5  PM 16K0F2D
90 792.0  -  806.0 100.0 2.5  PM 16K0F1E
90 792.0  -  806.0 25.0 2.5  PM 16K0F1E

Power listed is peak conducted output power. The antenna(s) used for this transmitter must be fixed-mounted on an outdoor permanent structure with a separation distance of at least 2 m from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions to comply with the MPE limit and requirements. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

Output power is continuously variable from 25 Watts to the maximum value listed.



TCB Grant - Application mD2Q/gyHJgcvmicDp2RC/w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 10/10/2011

Application Dated: 10/10/2011
Midland Radio Corporation
5900 Parretta Drive
Kansas City, MO 64120-2134
 
Attention: Jeff Brame , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MMA917100B
Name of Grantee:  Midland Radio Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: BASE STATION/REPEATER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 792.0  -  806.0 100.0 2.5  PM NOTE 1
90 792.0  -  806.0 25.0 2.5  PM NOTE 1

Power listed is peak conducted output power. The antenna(s) used for this transmitter must be fixed-mounted on an outdoor permanent structure with a separation distance of at least 2 m from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions to comply with the MPE limit and requirements. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

Output power is continuously variable from 25 Watts to the maximum value listed.

Class II Change (2011): To correct emission designators of P25 modulation.

NOTE 1: 11K2F3E, 8K10F1D, 11K2F2D, 8K10F1E, 16K0F3E, 16K0F1D, 16K0F2D, 16K0F1E


EAS Grant - Application mD2Q/gyHJgcvmicDp2RC/w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Midland Radio Corporation
5900 Parretta Drive
Kansas City, MO 64120-2134
United States
  Date of Grant: 10/10/2011

Application Dated: 10/10/2011
 
Attention: Jeff Brame , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MMA917100B
Name of Grantee:  Midland Radio Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: BASE STATION/REPEATER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 792.0  -  806.0 100.0 2.5  PM NOTE 1
90 792.0  -  806.0 25.0 2.5  PM NOTE 1

Power listed is peak conducted output power. The antenna(s) used for this transmitter must be fixed-mounted on an outdoor permanent structure with a separation distance of at least 2 m from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions to comply with the MPE limit and requirements. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

Output power is continuously variable from 25 Watts to the maximum value listed.

Class II Change (2011): To correct emission designators of P25 modulation.

NOTE 1: 11K2F3E, 8K10F1D, 11K2F2D, 8K10F1E, 16K0F3E, 16K0F1D, 16K0F2D, 16K0F1E



Mail To: