FCC ID MMARG2

Marine Transceiver

by Midland Radio Corporation

Grantee Code: MMA   Product Code: RG2
Latest application date: 2004-12-14

FCC ID Device Details

FCC IDMMARG2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeMMA
Product CodeRG2
Applicant BusinessMidland Radio Corporation 🇺🇸
Related Domains midlandradio.com
Equipment ClassMarine Transceiver
Test FirmTimco Engineering, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
156.025-157.425 MHzOriginal Equipment2004-12-14

Exhibits

DocumentTypeAvailableFile
users manualUsers Manual2004-12-14PDF 1.9 MB
internal photosInternal Photos2004-12-14PDF 295.4 KB
external photosExternal Photos2004-12-14PDF 245 KB
label locationID Label/Location Info2004-12-14PDF 196.4 KB
label sampleID Label/Location Info2004-12-14PDF 12.5 KB
block diagramBlock Diagram2004-12-14PDF 48.9 KB
schematicsSchematics2004-12-14PDF 394.7 KB
operational descriptionOperational Description2004-12-14PDF 24.7 KB
test reportTest Report2004-12-14PDF 198 KB
parts listParts List/Tune Up Info2004-12-14PDF 46.5 KB
tune up infoParts List/Tune Up Info2004-12-14PDF 11.6 KB

Application Information

Application IDa+OQNI9Ni8AhLZbPzgYf6w==
Final Action Date2004-12-14
Application PurposeOriginal Equipment
Applicant FRN0005867551
ModelRG2
Frequency Range156.025-157.425 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionMarine Transceiver
Responsible PartyButch Rittmann, Director of Operations, brittmann@midlandradio.com , 816 241-8500
Test FirmS Sanders, Timco Engineering, Inc., info@timcoengr.com , 888-472-2424
TCB Emailtei@timcoengr.com
TCB ScopeB3: Maritime & Aviation Radio Services equipment in 47 CFR parts 80 & 87
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. This device must not exceed a maximum transmitting duty factor of 50%, as documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 1 meter from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, and must not exceed an antenna gain of 2.1 dBi for satisfying RF exposure requirements. Use of any other antenna must be addressed at the time of licensing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
a+OQNI9Ni8AhLZbPzgYf6w==2004-12-14Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
156.025-157.425 MHz2510ppm16K0F3E8
156.025-157.425 MHz110ppm16K0F3E8
156.025-157.425 MHz2510ppm16K0G3E8
156.025-157.425 MHz110ppm16K0G3E8

Grants

TCB Grant - Application a+OQNI9Ni8AhLZbPzgYf6w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/14/2004

Application Dated: 12/14/2004
Midland Radio Corporation
5900 Parretta Drive
Kansas City, MO 64120-2134
 
Attention: Butch Rittmann , Director of Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MMARG2
Name of Grantee:  Midland Radio Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Marine Transceiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
80 156.025  -  157.425 25.0 10.0  PM 16K0F3E
80 156.025  -  157.425 1.0 10.0  PM 16K0F3E
80 156.025  -  157.425 25.0 10.0  PM 16K0G3E
80 156.025  -  157.425 1.0 10.0  PM 16K0G3E

Power listed is conducted. This device must not exceed a maximum transmitting duty factor of 50%, as documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 1 meter from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, and must not exceed an antenna gain of 2.1 dBi for satisfying RF exposure requirements. Use of any other antenna must be addressed at the time of licensing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application a+OQNI9Ni8AhLZbPzgYf6w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Midland Radio Corporation
5900 Parretta Drive
Kansas City, MO 64120-2134
United States
  Date of Grant: 12/14/2004

Application Dated: 12/14/2004
 
Attention: Butch Rittmann , Director of Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MMARG2
Name of Grantee:  Midland Radio Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Marine Transceiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
80 156.025  -  157.425 25.0 10.0  PM 16K0F3E
80 156.025  -  157.425 1.0 10.0  PM 16K0F3E
80 156.025  -  157.425 25.0 10.0  PM 16K0G3E
80 156.025  -  157.425 1.0 10.0  PM 16K0G3E

Power listed is conducted. This device must not exceed a maximum transmitting duty factor of 50%, as documented in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 1 meter from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, and must not exceed an antenna gain of 2.1 dBi for satisfying RF exposure requirements. Use of any other antenna must be addressed at the time of licensing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: