FCC ID MMFSMP-WL

MMF-SMP-WL, MMF SMPWL, MMFSMP-WL, MMF5MP-WL

Sato Corporation Wireless LAN Board SMP-WL

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: MMFSMP-WL is MMF. The remaining characters of the FCC ID, SMP-WL, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: Wireless LAN Board

Application: Wireless LAN Board
Equipment Class: DTS - Digital Transmission System
Short Link: fcc.id/MMFSMP-WL
Sources: FCC.gov | FCC.report
Registered By: Sato Corporation - MMF (Japan)

App #	Purpose	Date	Unique ID
1	Original Equipment	2011-07-28	0lh+VXKGkbom5ieH9zHxPQ==

Operating Frequencies

Frequency Range	Power Output	Rule Parts	Line Entry
2.412-2.462 GHz	58.5 mW	15C	1
2.412-2.462 GHz	158.1 mW	15C	2

Exhibits

Document	Type	Submitted Available
User Manual 2	Users Manual Adobe Acrobat PDF (987 kB)	2011-07-28 2011-07-28
User Manual 1	Users Manual Adobe Acrobat PDF (1126 kB)	2011-07-28 2011-07-28
Label	ID Label/Location Info Adobe Acrobat PDF (75 kB)	2011-07-28 2011-07-28
Label Location	ID Label/Location Info Adobe Acrobat PDF (129 kB)	2011-07-28 2011-07-28
Installation Manual_MB200i	Users Manual Adobe Acrobat PDF (2174 kB)	2011-07-28 2011-07-28
Photo_Antenna	External Photos Adobe Acrobat PDF (65 kB)	2011-07-28 2011-07-28
Internal Photo	Internal Photos Adobe Acrobat PDF (265 kB)	2011-07-28 2011-07-28
External Photo	External Photos Adobe Acrobat PDF (265 kB)	2011-07-28 2011-07-28
FCC SAR report (instruments)	RF Exposure Info Adobe Acrobat PDF (2180 kB)	2011-07-28 2011-07-28
FCC SAR report (measurement data)	RF Exposure Info Adobe Acrobat PDF (835 kB)	2011-07-28 2011-07-28
FCC SAR report (setup photo)	RF Exposure Info Adobe Acrobat PDF (2972 kB)	2011-07-28 2011-07-28
FCC SAR report (photo)	RF Exposure Info Adobe Acrobat PDF (543 kB)	2011-07-28 2011-07-28
FCC SAR report	RF Exposure Info Adobe Acrobat PDF (534 kB)	2011-07-28 2011-07-28
FCC15C test data & instruments	Test Report Adobe Acrobat PDF (1022 kB)	2011-07-28 2011-07-28
FCC15C test setup photo	Test Setup Photos Adobe Acrobat PDF (754 kB)	2011-07-28 2011-07-28
FCC15C report	Test Report Adobe Acrobat PDF (471 kB)	2011-07-28 2011-07-28
Request for confidentiality letter	Cover Letter(s) Adobe Acrobat PDF (751 kB)	2011-07-28 2011-07-28
LMA letter	Cover Letter(s) Adobe Acrobat PDF (1419 kB)	2011-07-28 2011-07-28
Authorization Letter	Cover Letter(s) Adobe Acrobat PDF (807 kB)	2011-07-28 2011-07-28
Parts List	Parts List/Tune Up Info Adobe Acrobat PDF (117 kB)	2011-07-28
Theory of Operation	Operational Description Adobe Acrobat PDF (69 kB)	2011-07-28
Block Diagram	Block Diagram Adobe Acrobat PDF (145 kB)	2011-07-28
Schematic	Schematics Adobe Acrobat PDF (1425 kB)	2011-07-28
Theory of Operation_Antenna	Operational Description Adobe Acrobat PDF (202 kB)	2011-07-28

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	Sato Corporation
FCC Registration Number (FRN):	0023725633
Alphanumeric FCC ID:	MMFSMPWL
Unique Application Identifier:	0lh+VXKGkbom5ieH9zHxPQ==
Line one:	1-7-1, Shimomeguro
City:	Meguro-ku, Tokyo
State:	N/A
Country:	Japan
Zip Code:	153-0064

TCB Information

TCB Application Email Address:	emc.jp@jp.ul.com
TCB Scope:	A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID

Grantee Code:	MMF
Product Code:	SMP-WL

Person at the applicant's address to receive grant or for contact

Name:	Mamoru Kido
Title:	Group Manager

Telephone Number:

+81-3-5745-3450

Extension:

Fax Number:	+81-3-5487-8525
Email:	grp-appli-rd@sato-global.com

Technical Contact

Firm Name:	UL Japan, Inc.
First Name:	Takahiro
Last Name:	Hatakeda
Line 1:	4383-326 Asama-cho, Ise-shi
City:	Mie-ken
Country:	Japan
Zip Code:	516-0021

Telephone Number:

81-596-24-8116

Extension:

Fax Number:	81-596-24-8124
E-Mail:	Takahiro.Hatakeda@jp.ul.com

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: No

If so, specify the short-term confidentiality release date (MM/DD/YYYY format):
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	Wireless LAN Board

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Limited Single Modular Approval

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: UL Japan, Inc. Head office EMC Lab.

First Name: Tetsuya

Last Name: Hashimoto

Telephone Number:

81-596-24-8116

Extension:

Fax Number: +81-596-24-8095

E-mail: Tetsuya.Hashimoto@jp.ul.com

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Limited Modular Approval. Output power listed is Conducted. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing. When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. Maximum measured SAR value: 0.571 W/kg (Body)

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: Yoshinobu Asai

Title of authorized signature: Team Leader, Application Section

Complete items below if agent signs the application:

Firm Name: UL Japan, Inc.

Name: Yoshinobu Yoshinobu Yoshinobu

Line 1: Yoshinobu

Line 2: Yoshinobu

P.O. Box: Yoshinobu

City: Yoshinobu

State: Yoshinobu

Country: Yoshinobu

Zip Code: Yoshinobu

Telephone Number:

81-596-24-8116

Fax Number: 81-596-24-8095

E-mail: Yoshinobu.Asai@jp.ul.com

Grants

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan

Date of Grant: 07/28/2011

Application Dated: 07/28/2011

Sato Corporation

1-7-1, Shimomeguro

Meguro-ku, Tokyo, 153-0064
Japan

Attention: Mamoru Kido , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	MMFSMP-WL

Name of Grantee:	Sato Corporation

Equipment Class:	Digital Transmission System
Notes:	Wireless LAN Board
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0 - 2462.0	0.0585
	15C	2412.0 - 2462.0	0.1581

Limited Modular Approval. Output power listed is Conducted. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing. When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. Maximum measured SAR value: 0.571 W/kg (Body)

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Sato Corporation
1-7-1, Shimomeguro
Meguro-ku, Tokyo, 153-0064
Japan

Date of Grant: 07/28/2011

Application Dated: 07/28/2011

Attention: Mamoru Kido , Group Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	MMFSMP-WL

Name of Grantee:	Sato Corporation

Equipment Class:	Digital Transmission System
Notes:	Wireless LAN Board
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0 - 2462.0	0.0585
	15C	2412.0 - 2462.0	0.1581

Mail To:

EA665916

FCC ID MMFSMP-WL

MMF-SMP-WL, MMF SMPWL, MMFSMP-WL, MMF5MP-WL

Sato Corporation Wireless LAN Board SMP-WL

Purchase on Amazon: Wireless LAN Board

Operating Frequencies

Exhibits

Application Forms

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details