FCC ID MQ4WM3210

802.11 a/b/g Wireless LAN Mini PCI Card

by Abocom Systems Inc

Grantee Code: MQ4   Product Code: WM3210
Latest application date: 2006-11-13

FCC ID Device Details

FCC IDMQ4WM3210
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeMQ4
Product CodeWM3210
Applicant BusinessAbocom Systems Inc 🇹🇼
Related Domains abocom.com.tw
Equipment Class802.11 a/b/g Wireless LAN Mini PCI Card
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2006-11-13
5180-5240 MHzOriginal Equipment2006-11-13

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2006-11-13PDF 1 MB
Internal PhotoInternal Photos2006-11-13PDF 261.6 KB
External PhotoExternal Photos2006-11-13PDF 250 KB
Label InfoID Label/Location Info2006-11-13PDF 115.9 KB
Test Setup PhotosTest Setup Photos2006-11-13PDF 475 KB
Test ReportTest Report2006-11-13PDF 1.9 MB
Test ReportTest Report2006-11-13PDF 2.3 MB
Confidentiality Request LetterCover Letter(s)2006-11-13PDF 122.1 KB
LMA LetterCover Letter(s)2006-11-13PDF 30.7 KB
MPERF Exposure Info2006-11-13PDF 58.7 KB
MPERF Exposure Info2006-11-13PDF 57.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 185.4 KB
Schematics Metadata onlySchematicsPDF 104.1 KB
Operational Description Metadata onlyOperational DescriptionPDF 46 KB

Application Information

Application IDRNMCXiUreZ1ixYvjJFRnRg==
Final Action Date2006-11-13
Application PurposeOriginal Equipment
Applicant FRN0009543745
ModelWM3210
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11 a/b/g Wireless LAN Mini PCI Card
Responsible PartyHarry Huang, Manager, harryh@abocom.com.tw , 886-3-758-0777
Technical ContactWayne Hsu, Sporon International Inc., wayne@sporton.com.tw
Test FirmKathy Lin, Sporton International Inc., Kathy@sporton.com.tw , 886-2-2696-2468
TCB Emailbentje.holger@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Applications

Application IDDatePurpose
RNMCXiUreZ1ixYvjJFRnRg==2006-11-13Original Equipment
CEL7tk0Ry1/FPasTAcOe7Q==2006-11-13Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.150715CCC
5180-5240 MHz0.049500015ECC
5745-5825 MHz0.154215CCC

Grants

TCB Grant - Application RNMCXiUreZ1ixYvjJFRnRg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 11/13/2006

Application Dated: 11/13/2006
Abocom Systems Inc
No.77, Yu-Yih Rd.,
Chu-Nan, Miao-Lih County 35059, Taiwan R.O.C.
Miao-Lih, 35059
Taiwan
 
Attention: Harry Huang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MQ4WM3210
Name of Grantee:  Abocom Systems Inc
Equipment Class: Digital Transmission System
Notes: 802.11 a/b/g Wireless LAN Mini PCI Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.1507  
CC 15C 5745.0  -  5825.0 0.1542  

Limited Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application RNMCXiUreZ1ixYvjJFRnRg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Abocom Systems Inc
No.77, Yu-Yih Rd., Chu-Nan, Miao-Lih County 35059, Taiwan R.O.C.
Miao-Lih, 35059
Taiwan
  Date of Grant: 11/13/2006

Application Dated: 11/13/2006
 
Attention: Harry Huang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MQ4WM3210
Name of Grantee:  Abocom Systems Inc
Equipment Class: Digital Transmission System
Notes: 802.11 a/b/g Wireless LAN Mini PCI Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.1507  
CC 15C 5745.0  -  5825.0 0.1542  

Limited Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application CEL7tk0Ry1/FPasTAcOe7Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 11/13/2006

Application Dated: 11/13/2006
Abocom Systems Inc
No.77, Yu-Yih Rd.,
Chu-Nan, Miao-Lih County 35059, Taiwan R.O.C.
Miao-Lih, 35059
Taiwan
 
Attention: Harry Huang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MQ4WM3210
Name of Grantee:  Abocom Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b/g Wireless LAN Mini PCI Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0495  

Limited Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application CEL7tk0Ry1/FPasTAcOe7Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Abocom Systems Inc
No.77, Yu-Yih Rd., Chu-Nan, Miao-Lih County 35059, Taiwan R.O.C.
Miao-Lih, 35059
Taiwan
  Date of Grant: 11/13/2006

Application Dated: 11/13/2006
 
Attention: Harry Huang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MQ4WM3210
Name of Grantee:  Abocom Systems Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 a/b/g Wireless LAN Mini PCI Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0495  

Limited Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: