FCC ID MSQ-EW2000TX

ASUS WICAST

by ASUSTeK Computer Inc

Grantee Code: MSQ   Product Code: EW2000TX
Latest application date: 2010-07-19

FCC ID Device Details

FCC IDMSQ-EW2000TX
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeMSQ
Product CodeEW2000TX
Applicant BusinessASUSTeK Computer Inc 🇹🇼
Related Domains asus.com
Equipment ClassASUS WICAST
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5190-5230 MHzOriginal Equipment2010-07-19
5755-5795 MHzOriginal Equipment2010-07-19

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2010-07-19PDF 122.2 KB
Internal PhotosInternal Photos2010-07-19PDF 3.7 MB
External PhotosExternal Photos2010-07-19PDF 3.7 MB
LabelID Label/Location Info2010-07-19PDF 22.7 KB
Label LocationID Label/Location Info2010-07-19PDF 70 KB
Test Setup PhotosTest Setup Photos2010-07-19PDF 565.4 KB
Test Setup Photos DFSTest Setup Photos2010-07-19PDF 102.7 KB
DFS ReportTest Report2010-07-19PDF 517.5 KB
Test ReportTest Report2010-07-19PDF 1.9 MB
Test ReportTest Report2010-07-19PDF 973.4 KB
AD HOC DOC LetterCover Letter(s)2010-07-19PDF 112.8 KB
Confidential LetterCover Letter(s)2010-07-19PDF 465.3 KB
DOC LetterCover Letter(s)2010-07-19PDF 371.3 KB
Modular Approval LetterCover Letter(s)2010-07-19PDF 170.7 KB
POACover Letter(s)2010-07-19PDF 538.6 KB
MPERF Exposure Info2010-07-19PDF 24.2 KB
MPERF Exposure Info2010-07-19PDF 24.2 KB

Application Information

Application IDU2nkjiRhO+ZFROMS/JLfQQ==
Final Action Date2010-07-19
Application PurposeOriginal Equipment
Applicant FRN0005821988
Model-EW2000TX
Frequency Range5190-5230 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionASUS WICAST
Responsible PartyJackson Yen, Associate Vice President, jackson_yen@asus.com , +886-2-28943447
Test FirmAlex Chen, Sporton International Inc., alex@sporton.com.tw , 886-3-327-3456
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Modular Approval: Power listed is conducted. . This device is restricted to indoor use only within the 5150-5250MHz band. This Module is approved only for installation in devices under control of the grantee and only for models indicated in this filing. This module must not be incorporated into any other device or system without retesting and authorization under a Class Permissive Change. This module is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee must ensure that the end-user has no manual instructions to remove or install the module. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. Limited Single Modular

Applications

Application IDDatePurpose
U2nkjiRhO+ZFROMS/JLfQQ==2010-07-19Original Equipment
JCpIrYfm4VBEQFSOqBmTyA==2010-07-19Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
5190-5230 MHz0.00515ECC, ND
5270-5310 MHz0.00515ECC, ND
5510-5670 MHz0.00615ECC, ND
5755-5795 MHz0.056000015CCC

Grants

TCB Grant - Application U2nkjiRhO+ZFROMS/JLfQQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 07/19/2010

Application Dated: 07/16/2010
ASUSTeK Computer Inc
4F, No. 150, Li-Te Rd.
Peitou, Taipei, 112
Taiwan
 
Attention: Jackson Yen , Associate Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MSQ-EW2000TX
Name of Grantee:  ASUSTeK Computer Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: ASUS WICAST
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC ND 15E 5190.0  -  5230.0 0.005  
CC ND 15E 5270.0  -  5310.0 0.005  
CC ND 15E 5510.0  -  5670.0 0.006  

Limited Modular Approval: Power listed is conducted. . This device is restricted to indoor use only within the 5150-5250MHz band. This Module is approved only for installation in devices under control of the grantee and only for models indicated in this filing. This module must not be incorporated into any other device or system without retesting and authorization under a Class Permissive Change. This module is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee must ensure that the end-user has no manual instructions to remove or install the module. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.

Limited Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application U2nkjiRhO+ZFROMS/JLfQQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ASUSTeK Computer Inc
4F, No. 150, Li-Te Rd.
Peitou, Taipei, 112
Taiwan
  Date of Grant: 07/19/2010

Application Dated: 07/16/2010
 
Attention: Jackson Yen , Associate Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MSQ-EW2000TX
Name of Grantee:  ASUSTeK Computer Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: ASUS WICAST
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC ND 15E 5190.0  -  5230.0 0.005  
CC ND 15E 5270.0  -  5310.0 0.005  
CC ND 15E 5510.0  -  5670.0 0.006  

Limited Modular Approval: Power listed is conducted. . This device is restricted to indoor use only within the 5150-5250MHz band. This Module is approved only for installation in devices under control of the grantee and only for models indicated in this filing. This module must not be incorporated into any other device or system without retesting and authorization under a Class Permissive Change. This module is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee must ensure that the end-user has no manual instructions to remove or install the module. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.

Limited Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application JCpIrYfm4VBEQFSOqBmTyA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 07/19/2010

Application Dated: 07/16/2010
ASUSTeK Computer Inc
4F, No. 150, Li-Te Rd.
Peitou, Taipei, 112
Taiwan
 
Attention: Jackson Yen , Associate Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MSQ-EW2000TX
Name of Grantee:  ASUSTeK Computer Inc
Equipment Class: Digital Transmission System
Notes: ASUS WICAST
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 5755.0  -  5795.0 0.056  

Limited Modular Approval: Power listed is conducted. This Module is approved only for installation in devices under control of the grantee and only for models indicated in this filing. This module must not be incorporated into any other device or system without retesting and authorization under a Class Permissive Change. This module is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee must ensure that the end-user has no manual instructions to remove or install the module. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application JCpIrYfm4VBEQFSOqBmTyA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ASUSTeK Computer Inc
4F, No. 150, Li-Te Rd.
Peitou, Taipei, 112
Taiwan
  Date of Grant: 07/19/2010

Application Dated: 07/16/2010
 
Attention: Jackson Yen , Associate Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MSQ-EW2000TX
Name of Grantee:  ASUSTeK Computer Inc
Equipment Class: Digital Transmission System
Notes: ASUS WICAST
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 5755.0  -  5795.0 0.056  

Limited Modular Approval: Power listed is conducted. This Module is approved only for installation in devices under control of the grantee and only for models indicated in this filing. This module must not be incorporated into any other device or system without retesting and authorization under a Class Permissive Change. This module is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Grantee must ensure that the end-user has no manual instructions to remove or install the module. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: