FCC ID MSQ-MT7922A22M
2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card
by ASUSTeK COMPUTER INC.
Grantee Code: MSQ Product Code: MT7922A22M
Latest application date: 2026-06-25
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2026-06-25 |
| 6535-6855 MHz | Class II permissive change or modification of presently authorized equipment | 2026-06-25 |
| 2412-2472 MHz | Class II permissive change or modification of presently authorized equipment | 2026-06-25 |
| 5865-5885 MHz | Class II permissive change or modification of presently authorized equipment | 2026-06-25 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2026-06-07 |
| 2412-2472 MHz | Class II permissive change or modification of presently authorized equipment | 2026-06-07 |
| 5865-5885 MHz | Class II permissive change or modification of presently authorized equipment | 2026-06-07 |
| 6535-6855 MHz | Class II permissive change or modification of presently authorized equipment | 2026-06-07 |
| 5955-7115 MHz | Change in identification of presently authorized equipment. Original FCC ID: RAS-MT7922A22M Grant Date: 01/21/2026 | 2026-04-29 |
| 5865-5885 MHz | Class II permissive change or modification of presently authorized equipment | 2026-04-16 |
| 2412-2472 MHz | Class II permissive change or modification of presently authorized equipment | 2026-04-16 |
| 6535-6855 MHz | Class II permissive change or modification of presently authorized equipment | 2026-04-16 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2026-04-16 |
| 5955-7115 MHz | Class II permissive change or modification of presently authorized equipment | 2026-04-16 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-08-20 |
| 5865-5885 MHz | Class II permissive change or modification of presently authorized equipment | 2025-08-20 |
| 6535-6855 MHz | Class II permissive change or modification of presently authorized equipment | 2025-08-20 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-08-20 |
| 5865-5885 MHz | Class II permissive change or modification of presently authorized equipment | 2025-07-28 |
| 6535-6855 MHz | Class II permissive change or modification of presently authorized equipment | 2025-07-28 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-07-28 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-07-28 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2025-07-10 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2025-07-10 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-07-10 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-07-10 |
| 5865-5885 MHz | Class II permissive change or modification of presently authorized equipment | 2025-06-12 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-06-12 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-06-12 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2025-06-12 |
| 5865-5885 MHz | Class II permissive change or modification of presently authorized equipment | 2025-05-16 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2025-05-16 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-05-16 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-05-16 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-11 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-11 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-11 |
| 2412-2472 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-11 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-10 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-10 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-10 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-10 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-09 |
| 5865-5885 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-09 |
| 2412-2472 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-09 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-09 |
| 5865-5885 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-07 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-07 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-07 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-07 |
| 5865-5885 MHz | Class II permissive change or modification of presently authorized equipment | 2025-03-10 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-03-10 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-03-10 |
| 6535-6855 MHz | Class II permissive change or modification of presently authorized equipment | 2025-03-10 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-26 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-26 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-26 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-23 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-05 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-05 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-04 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-08-19 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-06-17 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-06-17 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-06-17 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2024-06-17 |
| 5955-7115 MHz | Change in identification of presently authorized equipment. Original FCC ID: RAS-MT7922A22M Grant Date: 08/04/2022 | 2024-05-23 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: RAS-MT7922A22M Grant Date: 05/26/2022 | 2024-05-23 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: RAS-MT7922A22M Grant Date: 05/26/2022 | 2024-05-23 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: RAS-MT7922A22M Grant Date: 09/27/2021 | 2024-05-23 |
| 5955-6415 MHz | Change in identification of presently authorized equipment. Original FCC ID: RAS-MT7922A22M Grant Date: 08/29/2023 | 2024-05-23 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| TempConfidential_CA24270_FA608F_P_UM | Users Manual | 2026-02-16 | PDF 2.3 MB |
| TempConfidential_E24270_FA608F_P_UM | Users Manual | 2026-02-16 | PDF 1.2 MB |
| TempConfidential_CA25148_FA608K_U_W_FA808U_UM | Users Manual | 2026-01-25 | PDF 1.9 MB |
| TempConfidential_E25148_FA608K_U_W_FA808U_UM | Users Manual | 2026-01-25 | PDF 1.3 MB |
| TempConfidential_E24180_G814P_G814F_EM | Users Manual | 2025-12-09 | PDF 5.2 MB |
| TempConfidential_E24176_G614P_G614F_EM | Users Manual | 2025-11-12 | PDF 5.2 MB |
| TempConfidential_C252394_EUT Internal Photos | Internal Photos | 2026-02-16 | PDF 4.4 MB |
| TempConfidential_C252408_EUT Internal Photos | Internal Photos | 2026-01-25 | PDF 4.5 MB |
| TempConfidential_C252404_EUT Internal Photos | Internal Photos | 2026-01-06 | PDF 4.4 MB |
| TempConfidential_C252091_EUT Internal Photos | Internal Photos | 2025-12-09 | PDF 3.5 MB |
| TempConfidential_C252088_EUT Internal Photos | Internal Photos | 2025-11-12 | PDF 4.7 MB |
| TempConfidential_C252408_EUT Internal Photos_r1 | Internal Photos | 2025-10-07 | PDF 4.5 MB |
| External Photos | External Photos | 2026-04-29 | PDF 97.5 KB |
| TempConfidential_C252394_EUT External Photos | External Photos | 2026-02-16 | PDF 2.4 MB |
| TempConfidential_C252408_EUT External Photos | External Photos | 2026-01-25 | PDF 2.9 MB |
| TempConfidential_C252404_EUT External Photos | External Photos | 2026-01-06 | PDF 3.1 MB |
| TempConfidential_C252091_EUT External Photos | External Photos | 2025-12-09 | PDF 2.5 MB |
| TempConfidential_C252088_EUT External Photos | External Photos | 2025-11-12 | PDF 2.5 MB |
| TempConfidential_C252408_EUT External Photos_r1 | External Photos | 2025-10-07 | PDF 2.9 MB |
| FCC label info_FA808P | ID Label/Location Info | 2026-06-25 | PDF 250.6 KB |
| Label info_FA808_MTK | ID Label/Location Info | 2026-06-07 | PDF 751.4 KB |
| ID Label/Location Info | ID Label/Location Info | 2026-04-29 | PDF 393 KB |
| MT7922A22M LabelLoc, and contains ID | ID Label/Location Info | 2026-04-16 | PDF 1.9 MB |
| MT7922A22M LabelSml-host models | ID Label/Location Info | 2026-04-16 | PDF 1.7 MB |
| TempConfidential_USSC252394001_FCC SAR_App A_Setup Photos | Test Setup Photos | 2026-02-16 | PDF 517.1 KB |
| TempConfidential_USSC252394002_FCC TAS Validation_App A_Setup Photo | Test Setup Photos | 2026-02-16 | PDF 499.7 KB |
| TempConfidential_USSC252408001_FCC SAR_App A _Setup Photos | Test Setup Photos | 2026-01-25 | PDF 528 KB |
| TempConfidential_USSC252408002_FCC TAS Validation_App A_Setup Photo | Test Setup Photos | 2026-01-25 | PDF 545.9 KB |
| TempConfidential_USSC252404001_FCC SAR_App A_Setup Photos | Test Setup Photos | 2026-01-06 | PDF 680.3 KB |
| TempConfidential_USSC252404002_FCC TAS Validation_App A_Setup Photo | Test Setup Photos | 2026-01-06 | PDF 406.3 KB |
| TempConfidential_USSC252091001_FCC SAR_App A_Setup Photos | Test Setup Photos | 2025-12-09 | PDF 481 KB |
| TempConfidential_USSC252091002_FCC TAS Validation_App A_Setup Photo | Test Setup Photos | 2025-12-09 | PDF 462.3 KB |
| TempConfidential_USSC252088002_FCC TAS Validation_App A_Setup Photo | Test Setup Photos | 2025-11-12 | PDF 475.6 KB |
| USSC252088001_FCC SAR_App A_Setup Photos | Test Setup Photos | 2025-11-12 | PDF 428.5 KB |
| TempConfidential_USSC252408001_FCC SAR_App A_Setup Photos_r1 | Test Setup Photos | 2025-10-07 | PDF 528 KB |
| FA808_ICT_Antenna Datasheet | Test Report | 2026-06-25 | PDF 1.7 MB |
| FA808_INPAQ_Antenna Datasheet | Test Report | 2026-06-25 | PDF 1.4 MB |
| MT7922A22M Antenna Report_INNOWAVE_NB mode | Test Report | 2026-04-16 | PDF 527.7 KB |
| MT7922A22M Antenna Report_INNOWAVE_PAD mode | Test Report | 2026-04-16 | PDF 371.1 KB |
| MT7922A22M Antenna Report_INPAQ_NB mode | Test Report | 2026-04-16 | PDF 633.4 KB |
| MT7922A22M Antenna Report_INPAQ_PAD mode | Test Report | 2026-04-16 | PDF 557.9 KB |
| FCC_Attestation Letter Covered List | Attestation Statements | 2026-06-25 | PDF 315 KB |
| FCC_Attestation Letter US AGENT | Attestation Statements | 2026-06-25 | PDF 282.3 KB |
| FCC_Attestation Letter Covered List | Attestation Statements | 2026-06-07 | PDF 315 KB |
| Attestation Statements | Attestation Statements | 2026-04-29 | PDF 187.8 KB |
| US Agent Letter | Attestation Statements | 2026-04-29 | PDF 283.4 KB |
| MT7922A22M Covered List Attestation Letter_FCC_signed | Attestation Statements | 2026-04-16 | PDF 382.2 KB |
| MT7922A22M U.S. Agent Designation Attestation Letter_signed | Attestation Statements | 2026-04-16 | PDF 381.6 KB |
| FCC_C2PC letter_FA808P_TAS | Cover Letter(s) | 2026-06-25 | PDF 310 KB |
| FCC_ISED Confidentiality Letter | Cover Letter(s) | 2026-06-25 | PDF 306.8 KB |
| FCC_POA letter_2027 | Cover Letter(s) | 2026-06-25 | PDF 281.6 KB |
| FCC_TAS Declaration letter from MTK_FA808P | Cover Letter(s) | 2026-06-25 | PDF 58.4 KB |
| FCC_C2PC letter_FA808_TAS | Cover Letter(s) | 2026-06-07 | PDF 309.9 KB |
| FCC_ISED Confidentiality Letter | Cover Letter(s) | 2026-06-07 | PDF 306.8 KB |
| FCC_TAS Declaration letter from MTK_FA808 | Cover Letter(s) | 2026-06-07 | PDF 53.5 KB |
| Agent Authorization | Cover Letter(s) | 2026-04-29 | PDF 200.6 KB |
| Change ID Authorization | Cover Letter(s) | 2026-04-29 | PDF 147 KB |
| Contact Authorization-MediaTek | Cover Letter(s) | 2026-04-29 | PDF 69.8 KB |
| Request for Change ID | Cover Letter(s) | 2026-04-29 | PDF 173.2 KB |
| confidentiality | Cover Letter(s) | 2026-04-29 | PDF 180.9 KB |
| MT7922A22M Declaration of authorization_FCC_signed | Cover Letter(s) | 2026-04-16 | PDF 340.7 KB |
| MT7922A22M Permissive Change Request Letter_rev.3_signed | Cover Letter(s) | 2026-04-16 | PDF 313 KB |
| MT7922A22M Request for Confidentiality_FCC, ISED_signed | Cover Letter(s) | 2026-04-16 | PDF 351.2 KB |
| USSC261123001_FCC SAR_App B_System Check Plots | RF Exposure Info | 2026-06-25 | PDF 540.5 KB |
| USSC261123001_FCC SAR_App C_Highest Test Plots Metadata only | RF Exposure Info | 2026-06-25 | PDF 591.1 KB |
| USSC261123001_FCC SAR_App C_Highest Test Plots_r1 | RF Exposure Info | 2026-06-25 | PDF 696.4 KB |
| USSC261123001_FCC SAR_App D_Probe Cal. Certification | RF Exposure Info | 2026-06-25 | PDF 3.4 MB |
| USSC261123001_FCC SAR_App E_Dipole Cal. Certification | RF Exposure Info | 2026-06-25 | PDF 2.8 MB |
| USSC261123001_FCC SAR_r1 Metadata only | RF Exposure Info | 2026-06-25 | PDF 1.4 MB |
| USSC261123001_FCC SAR_r2 | RF Exposure Info | 2026-06-25 | PDF 1.4 MB |
| USSC261123002_FCC TAS | RF Exposure Info | 2026-06-25 | PDF 1.4 MB |
| USSC261123002_FCC TAS_App B_System Check Plots | RF Exposure Info | 2026-06-25 | PDF 519 KB |
| USSC261123002_FCC TAS_App C_Probe Cal. Certification | RF Exposure Info | 2026-06-25 | PDF 3 MB |
| USSC261123002_FCC TAS_App D_Dipole Cal. Certification | RF Exposure Info | 2026-06-25 | PDF 2.2 MB |
| USSC261128001_FCC SAR | RF Exposure Info | 2026-06-07 | PDF 1.4 MB |
| USSC261128001_FCC SAR_App B_System Check Plots | RF Exposure Info | 2026-06-07 | PDF 538.1 KB |
| USSC261128001_FCC SAR_App C_Highest Test Plots | RF Exposure Info | 2026-06-07 | PDF 589.9 KB |
| USSC261128001_FCC SAR_App D_Probe Cal. Certification | RF Exposure Info | 2026-06-07 | PDF 3.4 MB |
| USSC261128001_FCC SAR_App E_Dipole Cal. Certification | RF Exposure Info | 2026-06-07 | PDF 2.8 MB |
| USSC261128002_FCC TAS | RF Exposure Info | 2026-06-07 | PDF 1.4 MB |
| USSC261128002_FCC TAS_App B_System Check Plots | RF Exposure Info | 2026-06-07 | PDF 524.4 KB |
| USSC261128002_FCC TAS_App C_Probe Cal. Certification | RF Exposure Info | 2026-06-07 | PDF 3 MB |
| USSC261128002_FCC TAS_App D_Dipole Cal. Certification | RF Exposure Info | 2026-06-07 | PDF 2.2 MB |
| MT7922A22M FCC Appendix A_System Check Data_SAR_2026.04.02 | RF Exposure Info | 2026-04-16 | PDF 1.2 MB |
| MT7922A22M FCC Appendix B_Highest Measurement Data_SAR | RF Exposure Info | 2026-04-16 | PDF 657.4 KB |
| MT7922A22M FCC Appendix D_Probe Calibration_SAR | RF Exposure Info | 2026-04-16 | PDF 4.4 MB |
| MT7922A22M FCC Appendix E_Dipole and Source Calibration_SAR_Part1_2026.04.02 | RF Exposure Info | 2026-04-16 | PDF 4.4 MB |
| MT7922A22M FCC Appendix E_Dipole and Source Calibration_SAR_Part2_2026.04.02 | RF Exposure Info | 2026-04-16 | PDF 4.4 MB |
| MT7922A22M FCC Appendix E_Dipole and Source Calibration_SAR_Part3_2026.04.02 | RF Exposure Info | 2026-04-16 | PDF 853.5 KB |
| MT7922A22M FCC TestRpt_SAR_2026.04.02 | RF Exposure Info | 2026-04-16 | PDF 1.9 MB |
| TempConfidential_CA26693_FA808_FA808F_P_UM Metadata only | Users Manual | 2026-12-23 | PDF 1.8 MB |
| TempConfidential_E26692_FA808_FA808F_P_EM Metadata only | Users Manual | 2026-12-23 | PDF 1.5 MB |
| TempConfidential_E26693_FA808_FA808F_P_UM Metadata only | Users Manual | 2026-12-23 | PDF 1.2 MB |
| TempConfidential_MT7922A22M FCC Appendix C_Setup Photographs_SAR_rev. Metadata only | Users Manual | 2026-10-14 | PDF 2.1 MB |
| TempConfidential_MT7922A22M UserMan_rev. Metadata only | Users Manual | 2026-10-14 | PDF 2.6 MB |
| TempConfidential_C261123_EUT Internal Photos Metadata only | Internal Photos | 2026-12-23 | PDF 4.8 MB |
| TempConfidential_C261128_EUT Internal Photos Metadata only | Internal Photos | 2026-12-05 | PDF 4.3 MB |
| TempConfidential_MT7922A22M FCC IntPho_Part1_2026.04.02 Metadata only | Internal Photos | 2026-10-14 | PDF 4.5 MB |
| TempConfidential_MT7922A22M FCC IntPho_Part2_2026.04.02 Metadata only | Internal Photos | 2026-10-14 | PDF 3 MB |
| TempConfidential_C261123_EUT External Photos Metadata only | External Photos | 2026-12-23 | PDF 2.8 MB |
| TempConfidential_C261128_EUT External Photos Metadata only | External Photos | 2026-12-05 | PDF 2.8 MB |
| TempConfidential_MT7922A22M FCC ExtPho_Part1_2026.04.02 Metadata only | External Photos | 2026-10-14 | PDF 3.9 MB |
| TempConfidential_MT7922A22M FCC ExtPho_Part2_2026.04.02 Metadata only | External Photos | 2026-10-14 | PDF 3.9 MB |
| TempConfidential_MT7922A22M FCC ExtPho_Part3 Metadata only | External Photos | 2026-10-14 | PDF 2.4 MB |
| TempConfidential_USSC261123001_FCC SAR_App A_Setup Photos Metadata only | Test Setup Photos | 2026-12-23 | PDF 174.3 KB |
| TempConfidential_USSC261123002_FCC TAS_App A_Setup Photo Metadata only | Test Setup Photos | 2026-12-23 | PDF 480 KB |
| USSC261123001_FCC SAR_App A_Setup Photos_r1 Metadata only | Test Setup Photos | 2026-12-23 | PDF 175.3 KB |
| TempConfidential_USSC261128001_FCC SAR_App A_Setup Photos Metadata only | Test Setup Photos | 2026-12-05 | PDF 168.6 KB |
| TempConfidential_USSC261128002_FCC TAS_App A_Setup Photo Metadata only | Test Setup Photos | 2026-12-05 | PDF 484 KB |
| TempConfidential_MT7922A22M FCC Appendix C_Setup Photographs_SAR_rev. Metadata only | Test Setup Photos | 2026-10-14 | PDF 2.1 MB |
Application Information
| Application ID | p6Ya8SvMNLn6BiiaJl9+eA== |
|---|---|
| Final Action Date | 2026-06-25 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0005821988 |
| Model | MT7922A22M |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Responsible Party | Jackson Yen, jackson_yen@asus.com  , +886-2-28943447 |
| Technical Contact | Fly Lu, Eurofins, Fly.Lu@cpt.eurofinsasia.com  |
| Non-Technical Contact | Gigi Liu, ASUS COMPUTER INTERNATIONAL, Gigi_Liu@asus.com |
| Test Firm | Fly Lu, Eurofins E&E Wireless Taiwan Co., Ltd., Fly.lu@cpt.eurofinsasia.com , +886-3-2710188 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Long-Term Confidentiality | Yes |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| p6Ya8SvMNLn6BiiaJl9+eA== | 2026-06-25 | Class II permissive change or modification of presently authorized equipment |
| SL5D5mCYDdpqtdYxC9ng7w== | 2026-06-25 | Class II permissive change or modification of presently authorized equipment |
| LMWGLxYuhis2JrOxNqZ5fw== | 2026-06-25 | Class II permissive change or modification of presently authorized equipment |
| C2rnrhZkden9jKiQ2PQYYQ== | 2026-06-25 | Class II permissive change or modification of presently authorized equipment |
| x4HoWe8d9ZB8ioL9ySQP3Q== | 2026-06-07 | Class II permissive change or modification of presently authorized equipment |
| L9X9oje9k4amelNLEox51Q== | 2026-06-07 | Class II permissive change or modification of presently authorized equipment |
| DbM28Vlyd1DTOP5x8FlW1A== | 2026-06-07 | Class II permissive change or modification of presently authorized equipment |
| /bkNi/uQK5OFq8GTECgzKw== | 2026-06-07 | Class II permissive change or modification of presently authorized equipment |
| ppkUaPLw+M+3PDPJic37Pg== | 2026-04-29 | Change in identification of presently authorized equipment. Original FCC ID: RAS-MT7922A22M Grant Date: 01/21/2026 |
| prDrlSH+py1EBxo2q5JAdg== | 2026-04-16 | Class II permissive change or modification of presently authorized equipment |
| ZG/etET0dfWHerimNLScww== | 2026-04-16 | Class II permissive change or modification of presently authorized equipment |
| Y1rnZSZ9ez/x4s/JoHwzTw== | 2026-04-16 | Class II permissive change or modification of presently authorized equipment |
| DsnhQnx4AZ+pgfSqC1Ci0Q== | 2026-04-16 | Class II permissive change or modification of presently authorized equipment |
| 2O1MuCyYhaFg3Jy5wxr+Eg== | 2026-04-16 | Class II permissive change or modification of presently authorized equipment |
| rvLfrWzNAz5lO77mDTw3BA== | 2025-08-20 | Class II permissive change or modification of presently authorized equipment |
| ingPl2x4bZiIIz/IxKmNlA== | 2025-08-20 | Class II permissive change or modification of presently authorized equipment |
| X8XZpBXrSU1rIi0XQGxj6Q== | 2025-08-20 | Class II permissive change or modification of presently authorized equipment |
| Ck2OwcKTlnIX6m5dJLdujA== | 2025-08-20 | Class II permissive change or modification of presently authorized equipment |
| kWxce8F6FHTKIwylhFY1lg== | 2025-07-28 | Class II permissive change or modification of presently authorized equipment |
| hmURC6cLe4XZmmOrDeSIkg== | 2025-07-28 | Class II permissive change or modification of presently authorized equipment |
| EQqs4L0s5WvSrqwm5+/+9Q== | 2025-07-28 | Class II permissive change or modification of presently authorized equipment |
| 74gek9cAoBIetkXDVf9WsA== | 2025-07-28 | Class II permissive change or modification of presently authorized equipment |
| uDVFf9FvSN5Dp6HYlCLDJQ== | 2025-07-10 | Class II permissive change or modification of presently authorized equipment |
| kCs9QS9mOOyJ7TCMjeC+Mg== | 2025-07-10 | Class II permissive change or modification of presently authorized equipment |
| avKvEgOm+84XTkgApxvAqw== | 2025-07-10 | Class II permissive change or modification of presently authorized equipment |
| BKoXnW3sS7RRvWHpS6Zwhg== | 2025-07-10 | Class II permissive change or modification of presently authorized equipment |
| vk3MRhL4ML5lurtfV+Duvw== | 2025-06-12 | Class II permissive change or modification of presently authorized equipment |
| nSM3MErHENv/xhQdg4UP1Q== | 2025-06-12 | Class II permissive change or modification of presently authorized equipment |
| ViYmvKXyUevzqVJzy0VGig== | 2025-06-12 | Class II permissive change or modification of presently authorized equipment |
| SJdEMZdZk80YwUF75qMAKg== | 2025-06-12 | Class II permissive change or modification of presently authorized equipment |
| 2q+5TTF/uU0uD8OmEwo+0w== | 2025-05-16 | Class II permissive change or modification of presently authorized equipment |
| 2FJKWaBIY66SlEB350OPdw== | 2025-05-16 | Class II permissive change or modification of presently authorized equipment |
| 05q4nEdNuX3jb8Bf85+lWw== | 2025-05-16 | Class II permissive change or modification of presently authorized equipment |
| +F+AEUqCm7CzFLA1wP3Udg== | 2025-05-16 | Class II permissive change or modification of presently authorized equipment |
| wxowaO+W59qnEBnZnpO0rQ== | 2025-04-11 | Class II permissive change or modification of presently authorized equipment |
| k2JLEvQNp47DMkKu9x1s4A== | 2025-04-11 | Class II permissive change or modification of presently authorized equipment |
| je1qVbmyh7CXVwzoQV1+QQ== | 2025-04-11 | Class II permissive change or modification of presently authorized equipment |
| ciAajuXmksRWIc7gBkotYQ== | 2025-04-11 | Class II permissive change or modification of presently authorized equipment |
| pPkNSlatWEzt1exlLBxpnA== | 2025-04-10 | Class II permissive change or modification of presently authorized equipment |
| Wy07sAe3J5S6Xw9g2OfZCA== | 2025-04-10 | Class II permissive change or modification of presently authorized equipment |
| UHRQ0YN/JRLZ9kyfsYNd5w== | 2025-04-10 | Class II permissive change or modification of presently authorized equipment |
| ClTFlbopUVZczMfTHts02w== | 2025-04-10 | Class II permissive change or modification of presently authorized equipment |
| fDvx6RfsR3oskTKJwE5ehA== | 2025-04-09 | Class II permissive change or modification of presently authorized equipment |
| RwtiDFJ4tNEK1EOJLDQ/rw== | 2025-04-09 | Class II permissive change or modification of presently authorized equipment |
| Lv9YkOLLGpqpFLC5a6lfTQ== | 2025-04-09 | Class II permissive change or modification of presently authorized equipment |
| B3STOkJ6QaqHvH/SBaYVPA== | 2025-04-09 | Class II permissive change or modification of presently authorized equipment |
| UIhDdo8QNA+I9ilxUP2DNw== | 2025-04-07 | Class II permissive change or modification of presently authorized equipment |
| SQ1r4yYSHJ4thfLO2rU9xA== | 2025-04-07 | Class II permissive change or modification of presently authorized equipment |
| Jg5ATeZuGRSCKf4L2mwEyA== | 2025-04-07 | Class II permissive change or modification of presently authorized equipment |
| 1eHFlKw8KQBdQ8ZCM38OcQ== | 2025-04-07 | Class II permissive change or modification of presently authorized equipment |
| nDyG5uYPwfgvj+BOzjXNyQ== | 2025-03-10 | Class II permissive change or modification of presently authorized equipment |
| cqz0K1hnmsWT3DCy/uXgCg== | 2025-03-10 | Class II permissive change or modification of presently authorized equipment |
| H9oHbfxXA7xEZOB5tzl+Aw== | 2025-03-10 | Class II permissive change or modification of presently authorized equipment |
| 65HGcSzXZ0VHUaZJXoge+Q== | 2025-03-10 | Class II permissive change or modification of presently authorized equipment |
| rhdZZq/BHW3Pdbw4U2uWhQ== | 2024-09-26 | Class II permissive change or modification of presently authorized equipment |
| ckmGYrz2hFz+ygmtSUKoAg== | 2024-09-26 | Class II permissive change or modification of presently authorized equipment |
| +0Tz4IYKr+I4H/lgirgOMA== | 2024-09-26 | Class II permissive change or modification of presently authorized equipment |
| DdR+GznavmQGHSbvMmF1BQ== | 2024-09-23 | Class II permissive change or modification of presently authorized equipment |
| Vo80GdNaksyNtji48I6lUQ== | 2024-09-05 | Class II permissive change or modification of presently authorized equipment |
| 4IYj0GPxikcHYUpvpuKRKw== | 2024-09-05 | Class II permissive change or modification of presently authorized equipment |
| y/QRvJ5oBIB0qwaZQJkZYQ== | 2024-09-04 | Class II permissive change or modification of presently authorized equipment |
| O7SyVU5iXUvh64K59tO1oA== | 2024-08-19 | Class II permissive change or modification of presently authorized equipment |
| wElJNbxiYIMuccFc8ZHLmQ== | 2024-06-17 | Class II permissive change or modification of presently authorized equipment |
| VGYax8TkzLOAjXXtgo+6dA== | 2024-06-17 | Class II permissive change or modification of presently authorized equipment |
| Ttyd5qSWERkOMz/mm928hA== | 2024-06-17 | Class II permissive change or modification of presently authorized equipment |
| ECA9jevKPFuYXoFVyu3hPg== | 2024-06-17 | Class II permissive change or modification of presently authorized equipment |
| wdulj86qTiFOUA3ZOLbq7Q== | 2024-05-23 | Change in identification of presently authorized equipment. Original FCC ID: RAS-MT7922A22M Grant Date: 08/04/2022 |
| wLutiX6SSqPKCebCm7ujVA== | 2024-05-23 | Change in identification of presently authorized equipment. Original FCC ID: RAS-MT7922A22M Grant Date: 05/26/2022 |
| tcOJaBQZ4QfgXEyrbFhGYQ== | 2024-05-23 | Change in identification of presently authorized equipment. Original FCC ID: RAS-MT7922A22M Grant Date: 05/26/2022 |
| YqRbBOdGPYdTtX6OVYSl5w== | 2024-05-23 | Change in identification of presently authorized equipment. Original FCC ID: RAS-MT7922A22M Grant Date: 09/27/2021 |
| E6no40GNNJ1KvX9OdFekpA== | 2024-05-23 | Change in identification of presently authorized equipment. Original FCC ID: RAS-MT7922A22M Grant Date: 08/29/2023 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.0230000 | 15C | CC |
| 2402-2480 MHz | 0.022 | 15C | CC |
| 2402-2480 MHz | 0.0230000 | 15C | CC, MO |
| 2402-2480 MHz | 0.0230000 | CC | |
| 2402-2480 MHz | 0.022 | CC | |
| 2402-2480 MHz | 0.0330000 | CC | |
| 2402-2480 MHz | 0.022 | CC, MO | |
| 2412-2472 MHz | 0.769 | 15C | CC, MO |
| 2412-2472 MHz | 0.769 | CC, MO | |
| 5180-5240 MHz | 0.198 | 15E | CC, MO |
| 5180-5240 MHz | 0.198 | CC, MO |
Grants
TCB Grant - Application ZG/etET0dfWHerimNLScww==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 04/16/2026 Application Dated: 04/16/2026 |
| ASUSTeK COMPUTER INC. |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK COMPUTER INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.022 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.769 |
| Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidths for WLAN transmitter. This C2PC filing establishes portable category for ASUS platform with models: CZ1104CM4A, CL1104CM4A, CZ1204CM4A and CL1204CM4A (NB mode only, with panel size 11" and 12"); CZ1104FM4A, CL1104FM4A, CZ1204FM4A and CL1204FM4A (NB+PAD modes, with panel size 11" and 12"). SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.18 W/kg and 1.38 W/kg, respectively. Antennas used - PIFA with Part numbers: F001C8712190002 and F001C8711590001, manufactured by INNOWAVE; HQ26003000230 (WA-F-LE-03-002) and HQ26003000240 (WA-F-LE-01-009), manufactured by INPAQ. This device contains 2.4GHz BT and 5GHz/6GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application YqRbBOdGPYdTtX6OVYSl5w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/23/2024 Application Dated: 05/16/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.023 |
| C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.26 W/kg and 1.03 W/kg, respectively. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.26 W/kg and 0.60 W/kg, respectively. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.43 W/kg and 1.19 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application YqRbBOdGPYdTtX6OVYSl5w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 05/23/2024 Application Dated: 05/16/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.023 |
| C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.26 W/kg and 1.03 W/kg, respectively. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.26 W/kg and 0.60 W/kg, respectively. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.43 W/kg and 1.19 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 04/16/2026 Application Dated: 04/16/2026 |
| ASUSTeK COMPUTER INC. |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK COMPUTER INC. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.055 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.965 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.959 |
| This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.05 W/kg, respectively. This C2PC filing establishes portable category for ASUS platform with models: CZ1104CM4A, CL1104CM4A, CZ1204CM4A and CL1204CM4A (NB mode only, with panel size 11" and 12"); CZ1104FM4A, CL1104FM4A, CZ1204FM4A and CL1204FM4A (NB+PAD modes, with panel size 11" and 12"). SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.10 W/kg and 1.38 W/kg, respectively. The highest reported power density is 6.76 W/m2. Antennas used - PIFA with Part numbers: F001C8712190002 and F001C8711590001, manufactured by INNOWAVE; HQ26003000230 (WA-F-LE-03-002) and HQ26003000240 (WA-F-LE-01-009), manufactured by INPAQ. This device contains 2.4GHz BT/BLE/WLAN and 5GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application y/QRvJ5oBIB0qwaZQJkZYQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 09/04/2024 Application Dated: 07/16/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.023 |
| C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.26 W/kg and 1.03 W/kg, respectively. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.26 W/kg and 0.60 W/kg, respectively. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.43 W/kg and 1.19 W/kg, respectively. This C2PC filing establishes portable category for ASUS platform with models: FA401, FA401WI, FA401WV, FA401WU, FA401UI, FA401UV, FA401UU, TUF401, TUF401WI, TUF401WV, TUF401WU, TUF401UI, TUF401UV, TUF401UU, by enabling TAS (Time-Average SAR) feature through firmware and PIFA Antennas used - part number: AYP6Y-100509 (main) and AYP6Y-100510 (aux), manufactured by AWAN vendor; and part number: LA9RF572-CS-H (main) and LA9RF573-CS-H (aux), manufactured by Luxshare-ICT vendor. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application y/QRvJ5oBIB0qwaZQJkZYQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 09/04/2024 Application Dated: 07/16/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.023 |
| C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.26 W/kg and 1.03 W/kg, respectively. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.26 W/kg and 0.60 W/kg, respectively. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.43 W/kg and 1.19 W/kg, respectively. This C2PC filing establishes portable category for ASUS platform with models: FA401, FA401WI, FA401WV, FA401WU, FA401UI, FA401UV, FA401UU, TUF401, TUF401WI, TUF401WV, TUF401WU, TUF401UI, TUF401UV, TUF401UU, by enabling TAS (Time-Average SAR) feature through firmware and PIFA Antennas used - part number: AYP6Y-100509 (main) and AYP6Y-100510 (aux), manufactured by AWAN vendor; and part number: LA9RF572-CS-H (main) and LA9RF573-CS-H (aux), manufactured by Luxshare-ICT vendor. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 08/20/2025 Application Dated: 07/30/2025 |
| ASUSTeK COMPUTER INC. |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK COMPUTER INC. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.055 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.965 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.959 |
| This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths. Class II Permissive Change with a decrease in the output power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models FA608P, FA608PP, FA608PM, FA608F, FA608FP and FA608FM with the antenna INPAQ, part no. WA-P-LELE-04-068 (14008-0608200) and antenna LUXSHARE-ICT, part no. LA9RF612-NB-H (14008-0608300). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.91 W/kg and 1.33 W/kg respectively. WLAN TAS feature enabled. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application x4HoWe8d9ZB8ioL9ySQP3Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 06/07/2026 Application Dated: 05/22/2026 |
| ASUSTeK COMPUTER INC. |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK COMPUTER INC. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.023 |
| C2PC (for module itself): Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.26 W/kg and 1.03 W/kg, respectively. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This C2PC filing establishes portable category for ASUS platform with models: FA808, FA808FP, FA808FM, FA808PP, FA808PM, TUF808, TUF808FP, TUF808FM, TUF808PP, TUF808PM, TUF868, TUF868FP, TUF868FM, TUF868PP and TUF868PM (different hosts are for marketing purpose). As well as enabling TAS feature. SAR spot-check (because the distance between human body and antenna is larger than the distance evaluated according to modular SAR approach) and TAS validation have been performed to demonstrate RF Exposure compliance. Antennas used - PIFA with Part number (for main and aux antennas): WA-P-LELE-04-069 (14008-06070200), manufactured by INPAQ; and LA9RF613-NB-H (14008-06070300) manufactured by Luxshare-ICT. This device contains 2.4GHz BLE/WLAN and 5GHz/6GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application Wy07sAe3J5S6Xw9g2OfZCA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 04/10/2025 Application Dated: 04/10/2025 |
| ASUSTeK COMPUTER INC. |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK COMPUTER INC. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.055 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.965 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.959 |
| This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths. Class II Permissive Change to request approval for portable category specific host ASUS notebook PC, models FA808U, FA808UP, FA808UM, FA808UH, TUF808U, TUF808UP, TUF808UM, TUF808UH, TUF868U, TUF868UP, TUF868UM and TUF868UH with the antenna INPAQ, part no. WA-P-LELE-04-069 (14008-0607200) and antenna LUXSHARE-ICT, part no. LA9RF613-NB-H (14008-0607300). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 1.00 W/kg and 1.10 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application wxowaO+W59qnEBnZnpO0rQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 04/11/2025 Application Dated: 04/11/2025 |
| ASUSTeK COMPUTER INC. |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK COMPUTER INC. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.023 |
| Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the output power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models FA608, FA608UP, FA608UM, FA608UH, FA608WP, FA608WM, FA608WH, TUF668, TUF668UP, TUF668UM, TUF668UH, TUF608, TUF608UP, TUF608UM and TUF608UH with the antenna INPAQ, part no. WA-P-LELE-04-068 (14008-0608200) and antenna LUXSHARE-ICT, part no. LA9RF612-NB-H (14008-0608300). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 1.37 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application wLutiX6SSqPKCebCm7ujVA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/23/2024 Application Dated: 05/16/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.022 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.769 |
| C2PC: Enabling WiFi 6E 802.11a SISO mode by software. C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.65 W/kg and 0.74 W/kg, respectively. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidths. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.29 W/kg and 0.55 W/kg, respectively. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.34 W/kg and 0.77 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application wLutiX6SSqPKCebCm7ujVA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 05/23/2024 Application Dated: 05/16/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.022 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.769 |
| C2PC: Enabling WiFi 6E 802.11a SISO mode by software. C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.65 W/kg and 0.74 W/kg, respectively. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidths. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.29 W/kg and 0.55 W/kg, respectively. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.34 W/kg and 0.77 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 06/17/2024 Application Dated: 06/16/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.198 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.195 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.208 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.251 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.311 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.1862 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.312 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.592 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.224 |
| Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.34 W/kg and 0.60 W/kg, respectively. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.76 W/kg and 1.19 W/kg, respectively. C2PC: Enabling WiFi 6E 802.11a SISO mode by software. C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 & UNII-4 span channels. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values of UNII-4 band for body and simultaneous transmission use conditions are 0.74 W/kg and 1.00 W/kg, respectively. C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.77 W/kg and 1.03 W/kg, respectively. Class II Permissive Change with a decrease in the Wi-Fi Output Power through firmware respectively and request approval for portable category specific host of ASUSN notebook PC, model number: FA608W, FA608WI, FA608WV, FA608WU, TUF608W, TUF608WI, TUF608WV, TUF608WU, TUF668W, TUF668WI, TUF668WV, and TUF668W with the antenna INPAQ, part no. WA-P-LELE-04-055 (14008-06080000), and antenna Luxshare-ICT, part no. L64AT058-NB-H (14008-06080100). The highest reported Body and Simultaneous SAR values are 1.13 W/kg and 1.32 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application wElJNbxiYIMuccFc8ZHLmQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 06/17/2024 Application Dated: 06/16/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.198 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.195 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.208 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.251 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.311 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.1862 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.312 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.592 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.224 |
| Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.34 W/kg and 0.60 W/kg, respectively. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.76 W/kg and 1.19 W/kg, respectively. C2PC: Enabling WiFi 6E 802.11a SISO mode by software. C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 & UNII-4 span channels. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values of UNII-4 band for body and simultaneous transmission use conditions are 0.74 W/kg and 1.00 W/kg, respectively. C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.77 W/kg and 1.03 W/kg, respectively. Class II Permissive Change with a decrease in the Wi-Fi Output Power through firmware respectively and request approval for portable category specific host of ASUSN notebook PC, model number: FA608W, FA608WI, FA608WV, FA608WU, TUF608W, TUF608WI, TUF608WV, TUF608WU, TUF668W, TUF668WI, TUF668WV, and TUF668W with the antenna INPAQ, part no. WA-P-LELE-04-055 (14008-06080000), and antenna Luxshare-ICT, part no. L64AT058-NB-H (14008-06080100). The highest reported Body and Simultaneous SAR values are 1.13 W/kg and 1.32 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/23/2024 Application Dated: 05/16/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | 15E 6 GHz Low Power Indoor Client |
| Notes: | 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.055 |
| C2PC: Enabling WiFi 6E 802.11ax (160HE) SISO mode by software. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.71 W/kg and 0.97 W/kg, respectively. C2PC: Enabling WiFi 6E 802.11a SISO mode by software. C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 & UNII-4 span channels. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values of UNII-4 band for body and simultaneous transmission use conditions are 0.74 W/kg and 1.00 W/kg, respectively. C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.77 W/kg and 1.03 W/kg, respectively. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.34 W/kg and 0.60 W/kg, respectively. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.76 W/kg and 1.19 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application wdulj86qTiFOUA3ZOLbq7Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 05/23/2024 Application Dated: 05/16/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | 15E 6 GHz Low Power Indoor Client |
| Notes: | 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.055 |
| C2PC: Enabling WiFi 6E 802.11ax (160HE) SISO mode by software. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.71 W/kg and 0.97 W/kg, respectively. C2PC: Enabling WiFi 6E 802.11a SISO mode by software. C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 & UNII-4 span channels. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values of UNII-4 band for body and simultaneous transmission use conditions are 0.74 W/kg and 1.00 W/kg, respectively. C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.77 W/kg and 1.03 W/kg, respectively. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.34 W/kg and 0.60 W/kg, respectively. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.76 W/kg and 1.19 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 09/05/2024 Application Dated: 07/15/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.055 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.965 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.959 |
| This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.05 W/kg, respectively. This C2PC filing establishes portable category for ASUS platform with models: FA401, FA401WI, FA401WV, FA401WU, FA401UI, FA401UV, FA401UU, TUF401, TUF401WI, TUF401WV, TUF401WU, TUF401UI, TUF401UV, TUF401UU, by enabling TAS (Time-Average SAR) feature through firmware and PIFA Antennas used - part number: AYP6Y-100509 (main) and AYP6Y-100510 (aux), manufactured by AWAN vendor; and part number: LA9RF572-CS-H (main) and LA9RF573-CS-H (aux), manufactured by Luxshare-ICT vendor. SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.11 W/kg and 1.59 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Vo80GdNaksyNtji48I6lUQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 09/05/2024 Application Dated: 07/15/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.055 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.965 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.959 |
| This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths. Power Density and SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.79 W/kg and 1.05 W/kg, respectively. This C2PC filing establishes portable category for ASUS platform with models: FA401, FA401WI, FA401WV, FA401WU, FA401UI, FA401UV, FA401UU, TUF401, TUF401WI, TUF401WV, TUF401WU, TUF401UI, TUF401UV, TUF401UU, by enabling TAS (Time-Average SAR) feature through firmware and PIFA Antennas used - part number: AYP6Y-100509 (main) and AYP6Y-100510 (aux), manufactured by AWAN vendor; and part number: LA9RF572-CS-H (main) and LA9RF573-CS-H (aux), manufactured by Luxshare-ICT vendor. SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.11 W/kg and 1.59 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 06/12/2025 Application Dated: 06/12/2025 |
| ASUSTeK COMPUTER INC. |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK COMPUTER INC. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.198 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.195 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.208 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.251 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.311 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.186 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.312 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.592 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.224 |
| Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths. Class II Permissive Change with a decrease in the output power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models G814P, G814PP, G814PM, G814PH, GL814P, G814F, G814FP, G814FM, G814FH and GL814F with antenna AWAN, part no. AYP6Y-100365, AYP6Y-100366 and antenna Luxshare-ICT, part no. LA9RF407-CS-H, LA9RF409-CS-H. The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.46 W/kg and 0.73 W/kg respectively. WLAN TAS feature enabled. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
TCB Grant - Application ViYmvKXyUevzqVJzy0VGig==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 06/12/2025 Application Dated: 06/12/2025 |
| ASUSTeK COMPUTER INC. |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK COMPUTER INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.022 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.769 |
| Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidths. Class II Permissive Change with a decrease in the output power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models G814P, G814PP, G814PM, G814PH, GL814P, G814F, G814FP, G814FM, G814FH and GL814F with antenna AWAN, part no. AYP6Y-100365, AYP6Y-100366 and antenna Luxshare-ICT, part no. LA9RF407-CS-H, LA9RF409-CS-H. The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 0.73 W/kg respectively. WLAN TAS feature enabled. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application VGYax8TkzLOAjXXtgo+6dA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 06/17/2024 Application Dated: 06/16/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.023 |
| Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.26 W/kg and 0.60 W/kg, respectively. C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.26 W/kg and 1.03 W/kg, respectively. Class II Permissive Change with a decrease in the Wi-Fi Output Power through firmware respectively and request approval for portable category specific host of ASUSN notebook PC, model number: FA608W, FA608WI, FA608WV, FA608WU, TUF608W, TUF608WI, TUF608WV, TUF608WU, TUF668W, TUF668WI, TUF668WV, and TUF668W with the antenna INPAQ, part no. WA-P-LELE-04-055 (14008-06080000), and antenna Luxshare-ICT, part no. L64AT058-NB-H (14008-06080100). The highest reported Body and Simultaneous SAR values are 0.19 W/kg and 1.38 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application VGYax8TkzLOAjXXtgo+6dA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 06/17/2024 Application Dated: 06/16/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.023 |
| Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.26 W/kg and 0.60 W/kg, respectively. C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.26 W/kg and 1.03 W/kg, respectively. Class II Permissive Change with a decrease in the Wi-Fi Output Power through firmware respectively and request approval for portable category specific host of ASUSN notebook PC, model number: FA608W, FA608WI, FA608WV, FA608WU, TUF608W, TUF608WI, TUF608WV, TUF608WU, TUF668W, TUF668WI, TUF668WV, and TUF668W with the antenna INPAQ, part no. WA-P-LELE-04-055 (14008-06080000), and antenna Luxshare-ICT, part no. L64AT058-NB-H (14008-06080100). The highest reported Body and Simultaneous SAR values are 0.19 W/kg and 1.38 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 04/07/2025 Application Dated: 04/07/2025 |
| ASUSTeK COMPUTER INC. |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK COMPUTER INC. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.198 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.195 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.208 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.251 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.311 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.186 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.312 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.592 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.224 |
| C2PC: Enabling WiFi 6E 802.11a SISO mode by software. C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 & UNII-4 span channels. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values of UNII-4 band for body and simultaneous transmission use conditions are 0.74 W/kg and 1.00 W/kg, respectively. C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.77 W/kg and 1.03 W/kg, respectively. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end- users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.34 W/kg and 0.60 W/kg, respectively. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.76 W/kg and 1.19 W/kg, respectively. Class II Permissive Change: Additional chassis added, ASUSTeK, model number: G814P, G814PP, G814PM, G814PH, GL814P, G814F, G814FP, G814FM, G814FH, GL814F, with antennas AWAN, model no.: AYP6Y-100365 and AYP6Y-100366 and ICT, model no.: ASAP/LA9RF407-CS-H and ASAP/LA9RF409-CS-H to address the SAR evaluation with PIFA antenna at 0mm minimum test separation distance as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.46 W/kg and 0.73 W/kg, respectively. Product specific SAR at 10-gram tissue is 1.36 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
TCB Grant - Application UHRQ0YN/JRLZ9kyfsYNd5w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 04/10/2025 Application Dated: 04/10/2025 |
| ASUSTeK COMPUTER INC. |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK COMPUTER INC. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.023 |
| Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change to request approval for portable category specific host ASUS notebook PC, models FA808U, FA808UP, FA808UM, FA808UH, TUF808U, TUF808UP, TUF808UM, TUF808UH, TUF868U, TUF868UP, TUF868UM and TUF868UH with the antenna INPAQ, part no. WA-P-LELE-04-069 (14008-0607200) and antenna LUXSHARE-ICT, part no. LA9RF613-NB-H (14008-0607300). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.18 W/kg and 1.10 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application uDVFf9FvSN5Dp6HYlCLDJQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 07/10/2025 Application Dated: 07/10/2025 |
| ASUSTeK COMPUTER INC. |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK COMPUTER INC. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.055 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.965 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.959 |
| This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths. Class II Permissive Change with a decrease in the output power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models FA608, FA608UP, FA608UM, FA608UH, FA608WP, FA608WM, FA608WH, TUF668, TUF668UP, TUF668UM, TUF668UH, TUF608, TUF608UP, TUF608UM and TUF608UH with the antenna INPAQ, part no. WA-P-LELE-04-068 (14008-0608200) and antenna LUXSHARE-ICT, part no. LA9RF612-NB-H (14008-0608300). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.70 W/kg and 1.37 W/kg respectively. WLAN TAS feature enabled.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application Ttyd5qSWERkOMz/mm928hA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 06/17/2024 Application Dated: 06/16/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.022 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.769 |
| Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidths. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.29 W/kg and 0.55 W/kg, respectively. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.34 W/kg and 0.77 W/kg, respectively. C2PC: Enabling WiFi 6E 802.11a SISO mode by software. C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.65 W/kg and 0.74 W/kg, respectively. Class II Permissive Change with a decrease in the Wi-Fi Output Power through firmware respectively and request approval for portable category specific host of ASUSN notebook PC, model number: FA608W, FA608WI, FA608WV, FA608WU, TUF608W, TUF608WI, TUF608WV, TUF608WU, TUF668W, TUF668WI, TUF668WV, and TUF668W with the antenna INPAQ, part no. WA-P-LELE-04-055 (14008-06080000), and antenna Luxshare-ICT, part no. L64AT058-NB-H (14008-06080100). The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.35 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Ttyd5qSWERkOMz/mm928hA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 06/17/2024 Application Dated: 06/16/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 2TX 11ax (WiFi6E) BW160 + BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.022 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.769 |
| Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidths. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.29 W/kg and 0.55 W/kg, respectively. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.34 W/kg and 0.77 W/kg, respectively. C2PC: Enabling WiFi 6E 802.11a SISO mode by software. C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.65 W/kg and 0.74 W/kg, respectively. Class II Permissive Change with a decrease in the Wi-Fi Output Power through firmware respectively and request approval for portable category specific host of ASUSN notebook PC, model number: FA608W, FA608WI, FA608WV, FA608WU, TUF608W, TUF608WI, TUF608WV, TUF608WU, TUF668W, TUF668WI, TUF668WV, and TUF668W with the antenna INPAQ, part no. WA-P-LELE-04-055 (14008-06080000), and antenna Luxshare-ICT, part no. L64AT058-NB-H (14008-06080100). The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.35 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/23/2024 Application Dated: 05/16/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.198 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.195 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.208 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.251 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.311 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.186 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.312 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.592 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.224 |
| C2PC: Enabling WiFi 6E 802.11a SISO mode by software. C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 & UNII-4 span channels. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values of UNII-4 band for body and simultaneous transmission use conditions are 0.74 W/kg and 1.00 W/kg, respectively. C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.77 W/kg and 1.03 W/kg, respectively. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.34 W/kg and 0.60 W/kg, respectively. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.76 W/kg and 1.19 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application tcOJaBQZ4QfgXEyrbFhGYQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 05/23/2024 Application Dated: 05/16/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-MT7922A22M |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.198 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.195 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.208 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.251 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.311 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.186 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.312 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.592 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.224 |
| C2PC: Enabling WiFi 6E 802.11a SISO mode by software. C2PC: 1. Adding 3 new antennas. 2. Enabling UNII-4 and UNII-3 & UNII-4 span channels. SAR testing was performed to demonstrate RF exposure compliance. SAR has been evaluated at 5 mm. The highest reported SAR values of UNII-4 band for body and simultaneous transmission use conditions are 0.74 W/kg and 1.00 W/kg, respectively. C2PC : Adding the dipole antennas as described in the filling and updating WiFi 6E band. This module is approved in portable/mobile configurations. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.77 W/kg and 1.03 W/kg, respectively. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidths. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 5 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.34 W/kg and 0.60 W/kg, respectively. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 8 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.76 W/kg and 1.19 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |