FCC ID MSQ-QCNCM825
Qualcomm WiFi 7/BT Combo module
by ASUSTeK COMPUTER INC.
Grantee Code: MSQ Product Code: QCNCM825
Latest application date: 2025-03-21
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 6535-6855 MHz | Class II permissive change or modification of presently authorized equipment | 2025-03-21 |
| 5865-5885 MHz | Class II permissive change or modification of presently authorized equipment | 2025-03-21 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-03-21 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-03-21 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-11-27 |
| 5935-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2024-11-27 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-11-27 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-11-27 |
| 5180-5250 MHz | Class II permissive change or modification of presently authorized equipment | 2024-11-06 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-11-06 |
| 5935-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2024-11-06 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-11-06 |
| 2404-2478 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-09 |
| 5180-5250 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-09 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-09 |
| 5935-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2024-08-19 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-06-25 |
| 5865-5885 MHz | Class II permissive change or modification of presently authorized equipment | 2024-06-25 |
| 5935-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2024-06-25 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-06-25 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-05-14 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-05-14 |
| 5935-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2024-05-14 |
| 5180-5250 MHz | Class II permissive change or modification of presently authorized equipment | 2024-05-14 |
| 5935-6415 MHz | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNCM825 Grant Date: 08/27/2023 | 2024-03-22 |
| 5865-5885 MHz | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNCM825 Grant Date: 08/27/2023 | 2024-03-22 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNCM825 Grant Date: 01/21/2024 | 2024-03-22 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNCM825 Grant Date: 08/27/2023 | 2024-03-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| TempConfidential_E23882_UX3407_UM | Users Manual | 2025-09-15 | PDF 1 MB |
| TempConfidential_STC_E23066_HT5306QA_EM_WEB_s01 | Users Manual | 2024-12-23 | PDF 4.7 MB |
| TempConfidential_STC_E23067_HT5306QA_UM_24pages_draft4_s01 | Users Manual | 2024-12-23 | PDF 1.8 MB |
| TempConfidential_STC_EM_Part 1 | Users Manual | 2024-11-11 | PDF 5.4 MB |
| TempConfidential_STC_EM_Part 2 | Users Manual | 2024-11-11 | PDF 5.3 MB |
| TempConfidential_STC_UM | Users Manual | 2024-11-11 | PDF 1.9 MB |
| TempConfidential_C249100_EUT Internal Photos | Internal Photos | 2025-09-15 | PDF 3.9 MB |
| TempConfidential_STC_Antenna Photo | Internal Photos | 2024-12-23 | PDF 1.6 MB |
| TempConfidential_STC_Internal Photo Metadata only | Internal Photos | 2024-12-23 | PDF 4.2 MB |
| TempConfidential_STC_Internal Photo_s01 | Internal Photos | 2024-12-23 | PDF 4.6 MB |
| TempConfidential_STC_Antenna Photos_ICT | Internal Photos | 2024-11-11 | PDF 509.4 KB |
| TempConfidential_STC_Internal Photo | Internal Photos | 2024-11-11 | PDF 993.9 KB |
| TempConfidential_C249100_EUT External Photos | External Photos | 2025-09-15 | PDF 4 MB |
| TempConfidential_STC_External Photo Metadata only | External Photos | 2024-12-23 | PDF 515.6 KB |
| TempConfidential_STC_External Photo_s01 | External Photos | 2024-12-23 | PDF 2.5 MB |
| TempConfidential_STC_External Photo | External Photos | 2024-11-11 | PDF 637.4 KB |
| Label info_UX3407Q_r1 | ID Label/Location Info | 2024-11-27 | PDF 232.7 KB |
| TempConfidential_USSC249100001_FCC SAR Part-1_App A_Setup Photos | Test Setup Photos | 2025-09-15 | PDF 177.6 KB |
| TempConfidential_USSC249100002_FCC Part-2 TAS Validation_App A_Setup Photo | Test Setup Photos | 2025-09-15 | PDF 526.6 KB |
| TempConfidential_USSC249100001_FCC SAR_App A_Setup Photos | Test Setup Photos | 2025-05-27 | PDF 177.6 KB |
| STC_FCC_Rep_SAR_part 1_TESA2405000293ES_SAR Set up Photo | Test Setup Photos | 2025-05-06 | PDF 885.5 KB |
| FCC_Rep_SAR_part 1_TESA2403000149ES_Test Setup Photo | Test Setup Photos | 2025-02-16 | PDF 696.8 KB |
| TempConfidential_STC_FCC_Rep_SAR_part 1_TESA2403000149ES_Test Setup Photo | Test Setup Photos | 2025-02-16 | PDF 696.8 KB |
| TempConfidential_STC_FCC_TESA2405000293ES_SAR Set up Photo | Test Setup Photos | 2024-12-23 | PDF 885.5 KB |
| TempConfidential_STC_FCC C1PC Setup Photo | Test Setup Photos | 2024-11-11 | PDF 375.3 KB |
| TempConfidential_STC_TESA2403000149ES_SAR Test Setup Photo | Test Setup Photos | 2024-11-11 | PDF 696.8 KB |
| UX3407_Antenna datasheet | Test Report | 2024-11-27 | PDF 617.1 KB |
| FCC_Attestation Letter US AGENT | Attestation Statements | 2025-03-21 | PDF 245.5 KB |
| FCC_Covered-List-Attestation | Attestation Statements | 2025-03-21 | PDF 216.1 KB |
| FCC C2PC Letter_UX3407Q_r1 | Attestation Statements | 2024-11-27 | PDF 234.1 KB |
| FCC_Attestation Letter US AGENT | Attestation Statements | 2024-11-27 | PDF 198 KB |
| FCC_Covered-List-Attestation | Attestation Statements | 2024-11-27 | PDF 267 KB |
| FCC_Covered-List-Attestation | Cover Letter(s) | 2024-11-27 | PDF 267 KB |
| Form_ASUS_FCC_Covered_List_Attestation_Letter_signed_s01 | Attestation Statements | 2024-11-06 | PDF 137.6 KB |
| Form_ASUS_FCC_U.S._Agent_Designation_Attestation_Letter_signed | Attestation Statements | 2024-11-06 | PDF 234.3 KB |
| FCC C2PC Letter_UX3407_TAS_r1 | Cover Letter(s) | 2025-03-21 | PDF 221 KB |
| FCC IC TAS Approval Letter for Eurofins | Cover Letter(s) | 2025-03-21 | PDF 320.4 KB |
| FCC IC_Confidentiality-Letter | Cover Letter(s) | 2025-03-21 | PDF 182 KB |
| FCC_POA letter_r1 | Cover Letter(s) | 2025-03-21 | PDF 220.1 KB |
| FCC C2PC Letter_UX3407Q_r1 | Cover Letter(s) | 2024-11-27 | PDF 234.1 KB |
| FCC_POA letter | Cover Letter(s) | 2024-11-27 | PDF 185.6 KB |
| Form_FCC permissive change letter_TAS_s01 | Cover Letter(s) | 2024-11-06 | PDF 192.6 KB |
| Form_FCC_agent_auth_letter_signed_s01 | Cover Letter(s) | 2024-11-06 | PDF 121.7 KB |
| Form_Request for Confidentiality - FCC TAS_s01 | Cover Letter(s) | 2024-11-06 | PDF 207.6 KB |
| USSC249100001_FCC SAR Part-1 | RF Exposure Info | 2025-03-21 | PDF 1.8 MB |
| USSC249100001_FCC SAR Part-1_App B | RF Exposure Info | 2025-03-21 | PDF 440.6 KB |
| USSC249100001_FCC SAR Part-1_App C | RF Exposure Info | 2025-03-21 | PDF 510.1 KB |
| USSC249100001_FCC SAR Part-1_App D | RF Exposure Info | 2025-03-21 | PDF 3.8 MB |
| USSC249100001_FCC SAR Part-1_App E | RF Exposure Info | 2025-03-21 | PDF 4 MB |
| USSC249100002_FCC Part-0 TAS Char | RF Exposure Info | 2025-03-21 | PDF 703.3 KB |
| USSC249100002_FCC Part-2 TAS Validation | RF Exposure Info | 2025-03-21 | PDF 1.1 MB |
| USSC249100002_FCC Part-2 TAS Validation_App B | RF Exposure Info | 2025-03-21 | PDF 348 KB |
| USSC249100002_FCC Part-2 TAS Validation_App C | RF Exposure Info | 2025-03-21 | PDF 1.7 MB |
| USSC249100002_FCC Part-2 TAS Validation_App D | RF Exposure Info | 2025-03-21 | PDF 1.9 MB |
| USSC249100001_FCC SAR | RF Exposure Info | 2024-11-27 | PDF 1.8 MB |
| USSC249100001_FCC SAR_App B | RF Exposure Info | 2024-11-27 | PDF 440.6 KB |
| USSC249100001_FCC SAR_App C | RF Exposure Info | 2024-11-27 | PDF 510.1 KB |
| USSC249100001_FCC SAR_App D | RF Exposure Info | 2024-11-27 | PDF 3.8 MB |
| USSC249100001_FCC SAR_App E | RF Exposure Info | 2024-11-27 | PDF 4 MB |
| TR_FCC_Rep B_SAR_TESA2409000613ES_1 | RF Exposure Info | 2024-11-06 | PDF 5.3 MB |
| TR_FCC_Rep B_SAR_TESA2409000613ES_2 | RF Exposure Info | 2024-11-06 | PDF 756.5 KB |
| TR_FCC_Rep C_SAR_TESA2409000613ES | RF Exposure Info | 2024-11-06 | PDF 3.8 MB |
| TR_FCC_Rep_SAR_part 0_TESA2409000611ES | RF Exposure Info | 2024-11-06 | PDF 433.1 KB |
| TR_FCC_Rep_SAR_part 1_ B_TESA2405000293ES | RF Exposure Info | 2024-11-06 | PDF 4.3 MB |
| TR_FCC_Rep_SAR_part 1_ C_TESA2405000293ES | RF Exposure Info | 2024-11-06 | PDF 2.8 MB |
| TR_FCC_Rep_SAR_part 1_TESA2405000293ES_s01 | RF Exposure Info | 2024-11-06 | PDF 1.9 MB |
| TR_FCC_Rep_SAR_part 2_TESA2409000613ES | RF Exposure Info | 2024-11-06 | PDF 838.1 KB |
Application Information
| Application ID | woNICDesrgg/RVF5AB25Qg== |
|---|---|
| Final Action Date | 2025-03-21 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0005821988 |
| Model | QCNCM825 |
| Frequency Range | 6535-6855 MHz |
| Equipment Class | 6CD - 15E 6 GHz Low Power Dual Client |
| Device Description | Qualcomm WiFi 7/BT Combo module |
| Responsible Party | Jackson Yen, Associate Vice President, jackson_yen@asus.com  , +886-2-28943447 |
| Technical Contact | Fly Lu, Eurofins E&E Wireless Taiwan Co., Ltd., Fly.Lu@cpt.eurofinsasia.com  |
| Test Firm | Fly Lu, Eurofins E&E Wireless Taiwan Co., Ltd., Fly.lu@cpt.eurofinsasia.com , +886-3-2710188 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 09/15/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum 4.81 dBi gain) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. This C2PC filing establishes portable category for ASUS platform with models: UX3407Q, BX3407Q, RX3407Q, UX4507R, BX3407R and RX3407R, with permanently reducing power through BIOS that cannot be changeable by the end-users; as well as enabling TAS feature. SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.72 W/kg and 1.18 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF586-NB-H, 14008-06220100 (aux) and LA9RF585-NB-H, 14008-06220000 (main), manufactured by LUXSHARE-ICT. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| woNICDesrgg/RVF5AB25Qg== | 2025-03-21 | Class II permissive change or modification of presently authorized equipment |
| XU+WSPuZ+2cIeLO7xoL+uQ== | 2025-03-21 | Class II permissive change or modification of presently authorized equipment |
| X72k5vTHw677LgAEIHPQFQ== | 2025-03-21 | Class II permissive change or modification of presently authorized equipment |
| Q9YfBdzzC1vfjN9ZzhynJw== | 2025-03-21 | Class II permissive change or modification of presently authorized equipment |
| qMGDXZ9uv/a2J82j+6Y+2Q== | 2024-11-27 | Class II permissive change or modification of presently authorized equipment |
| YhrVsHDJF2NahCX+vbFO0g== | 2024-11-27 | Class II permissive change or modification of presently authorized equipment |
| EqL+1tKqgJ6mjpfqqm7lXA== | 2024-11-27 | Class II permissive change or modification of presently authorized equipment |
| 1i5vtU0Hb7qPy0RpUvEUdg== | 2024-11-27 | Class II permissive change or modification of presently authorized equipment |
| TSbCYTHS1N5x4P/piD9AlQ== | 2024-11-06 | Class II permissive change or modification of presently authorized equipment |
| NELXoDkjoq7KlUDpbcFsJg== | 2024-11-06 | Class II permissive change or modification of presently authorized equipment |
| 3vX5Xbef09XJCTUyNihGgQ== | 2024-11-06 | Class II permissive change or modification of presently authorized equipment |
| 05XeFcgIrWP5MyQjjOnVsg== | 2024-11-06 | Class II permissive change or modification of presently authorized equipment |
| kUI5/umHQWzO0eJFjb6JAQ== | 2024-09-09 | Class II permissive change or modification of presently authorized equipment |
| GfNTRk+rHTW+U0bT4ThY0w== | 2024-09-09 | Class II permissive change or modification of presently authorized equipment |
| FNifPlT/rXR/im+wDkQGfw== | 2024-09-09 | Class II permissive change or modification of presently authorized equipment |
| 5inAHGhU6yPgJHmqW4CgpA== | 2024-08-19 | Class II permissive change or modification of presently authorized equipment |
| qgRqvItL9Sk5ZfxKTFKf4g== | 2024-06-25 | Class II permissive change or modification of presently authorized equipment |
| bJRlkhOWEBZTUHIXMlsLrw== | 2024-06-25 | Class II permissive change or modification of presently authorized equipment |
| REeF+D3aA0Fn70SeYnTBgQ== | 2024-06-25 | Class II permissive change or modification of presently authorized equipment |
| HG6Wxphapyffuk+cMnPYjQ== | 2024-06-25 | Class II permissive change or modification of presently authorized equipment |
| sZaaDrZeknBrKu8vsjnkSw== | 2024-05-14 | Class II permissive change or modification of presently authorized equipment |
| GgTg2iRSlVGsYbkI75kIYQ== | 2024-05-14 | Class II permissive change or modification of presently authorized equipment |
| A8TQ+UXHV5x0uCd9ZPs48Q== | 2024-05-14 | Class II permissive change or modification of presently authorized equipment |
| 2lwaGCYSr6sIEdH/VXbf8A== | 2024-05-14 | Class II permissive change or modification of presently authorized equipment |
| ewD7NFxPHyZHGB/C+lD43A== | 2024-03-22 | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNCM825 Grant Date: 08/27/2023 |
| c16fVdkQ8DWzuTL8kTY5hQ== | 2024-03-22 | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNCM825 Grant Date: 08/27/2023 |
| TnL23JbD5lraBTCoJ5soWw== | 2024-03-22 | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNCM825 Grant Date: 01/21/2024 |
| HE+88BXUoS1sve4gwff1yw== | 2024-03-22 | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNCM825 Grant Date: 08/27/2023 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.025 | 15C | CC, MO |
| 2402-2480 MHz | 0.036 | 15C | CC, MO |
| 2402-2480 MHz | 0.036 | CC, MO | |
| 2402-2480 MHz | 0.025 | CC, MO | |
| 2404-2478 MHz | 0.035 | 15C | CC, MO |
| 2404-2478 MHz | 0.035 | CC, MO | |
| 2412-2472 MHz | 0.932 | 15C | CC, MO |
| 2412-2472 MHz | 0.932 | CC, MO | |
| 5180-5250 MHz | 0.158 | 15E | CC, MO |
| 5180-5240 MHz | 0.158 | 15E | CC, MO |
| 5180-5240 MHz | 0.158 | CC, MO | |
| 5250-5320 MHz | 0.145 | 15E | CC, MO, ND |
| 5250-5320 MHz | 0.145 | CC, MO, ND | |
| 5500-5720 MHz | 0.176 | 15E | CC, MO, ND |
| 5500-5720 MHz | 0.176 | CC, MO, ND | |
| 5745-5825 MHz | 0.146 | 15E | CC, MO |
| 5745-5825 MHz | 0.146 | CC, MO | |
| 5815 MHz | 0.155 | 15E | CC, EP, MO |
| 5815 MHz | 0.155 | CC, EP, MO | |
| 5835 MHz | 0.456 | 15E | CC, EP, MO |
| 5835 MHz | 0.456 | CC, EP, MO | |
| 5845 MHz | 0.374 | 15E | CC, EP, MO |
| 5845 MHz | 0.374 | CC, EP, MO | |
| 5855 MHz | 0.525 | 15E | CC, EP, MO |
| 5855 MHz | 0.525 | CC, EP, MO | |
| 5865-5885 MHz | 0.426 | 15E | CC, EP, MO |
| 5865-5885 MHz | 0.426 | CC, EP, MO | |
| 5935-6415 MHz | 0.684 | 15E | CC, EP, MO |
| 5935-6415 MHz | 0.684 | CC, EP, MO | |
| 5935-7115 MHz | 0.206 | 15E | CC, EP, MO |
Grants
TCB Grant - Application YhrVsHDJF2NahCX+vbFO0g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 11/27/2024 Application Dated: 11/25/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Intel BE201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.684 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.536 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.206 |
| Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum 4.81 dBi gain) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. This C2PC filing establishes portable category for ASUS platform with models: UX3407Q, BX3407Q, RX3407Q, UX4507R, BX3407R and RX3407R, with permanently reducing power through BIOS that cannot be changeable by the end-users. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.72 W/kg and 1.18 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF586-NB-H, 14008-06220100 (aux) and LA9RF585-NB-H, 14008-06220000 (main), manufactured by LUXSHARE-ICT. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application YhrVsHDJF2NahCX+vbFO0g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 11/27/2024 Application Dated: 11/25/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Intel BE201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.684 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.536 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.206 |
| Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum 4.81 dBi gain) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. This C2PC filing establishes portable category for ASUS platform with models: UX3407Q, BX3407Q, RX3407Q, UX4507R, BX3407R and RX3407R, with permanently reducing power through BIOS that cannot be changeable by the end-users. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.72 W/kg and 1.18 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF586-NB-H, 14008-06220100 (aux) and LA9RF585-NB-H, 14008-06220000 (main), manufactured by LUXSHARE-ICT. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 03/21/2025 Application Dated: 03/21/2025 |
| ASUSTeK COMPUTER INC. |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK COMPUTER INC. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.158 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.145 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.176 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.146 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.426 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.374 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.456 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.525 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.155 |
| Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. This C2PC filing establishes portable category for ASUS platform with models: UX3407Q, BX3407Q, RX3407Q, UX4507R, BX3407R and RX3407R, with permanently reducing power through BIOS that cannot be changeable by the end-users; as well as enabling TAS feature. SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.18 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF586-NB-H, 14008-06220100 (aux) and LA9RF585-NB-H, 14008-06220000 (main), manufactured by LUXSHARE-ICT. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
TCB Grant - Application X72k5vTHw677LgAEIHPQFQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 03/21/2025 Application Dated: 03/21/2025 |
| ASUSTeK COMPUTER INC. |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK COMPUTER INC. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.036 | ||
| CC MO | 15C | 2404.0 - 2478.0 | 0.035 |
| CIIPC for this application. Software change to enable QHS mode for this device (based on initial modular manufacturer, certified on 01/21/2024). Single Modular Approval. Power listed is the maximum conducted output power. Co- transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This C2PC filing establishes portable category for ASUS platform with models: UX3407Q, BX3407Q, RX3407Q, UX4507R, BX3407R and RX3407R, with permanently reducing power through BIOS that cannot be changeable by the end-users; as well as enabling TAS feature. SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04 W/kg and 1.18 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF586-NB-H, 14008-06220100 (aux) and LA9RF585-NB-H, 14008-06220000 (main), manufactured by LUXSHARE-ICT. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application woNICDesrgg/RVF5AB25Qg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 03/21/2025 Application Dated: 03/21/2025 |
| ASUSTeK COMPUTER INC. |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK COMPUTER INC. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.684 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.536 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.206 |
| Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum 4.81 dBi gain) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. This C2PC filing establishes portable category for ASUS platform with models: UX3407Q, BX3407Q, RX3407Q, UX4507R, BX3407R and RX3407R, with permanently reducing power through BIOS that cannot be changeable by the end-users; as well as enabling TAS feature. SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.72 W/kg and 1.18 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF586-NB-H, 14008-06220100 (aux) and LA9RF585-NB-H, 14008-06220000 (main), manufactured by LUXSHARE-ICT. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application TSbCYTHS1N5x4P/piD9AlQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 11/06/2024 Application Dated: 10/15/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.158 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.145 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.176 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.146 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.426 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.374 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.456 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.525 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.155 |
| Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. This C2PC filing establishes portable category for ASUS platform with models: HT5306Q/JT5306Q, with permanently reducing power through software contorted by the modular manufacturer (Qualcomm, not changeable by end-users); as well as enabling TAS feature via software. SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.04 W/kg and 1.55 W/kg, respectively. Antenna used - PIFA with Part number: WA-F-LE-02-051 (Main) and WA-F-LE-01-013 (Aux), manufactured by INPAQ. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application TSbCYTHS1N5x4P/piD9AlQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 11/06/2024 Application Dated: 10/15/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.158 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.145 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.176 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.146 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.426 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.374 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.456 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.525 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.155 |
| Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. This C2PC filing establishes portable category for ASUS platform with models: HT5306Q/JT5306Q, with permanently reducing power through software contorted by the modular manufacturer (Qualcomm, not changeable by end-users); as well as enabling TAS feature via software. SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.04 W/kg and 1.55 W/kg, respectively. Antenna used - PIFA with Part number: WA-F-LE-02-051 (Main) and WA-F-LE-01-013 (Aux), manufactured by INPAQ. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle #1 Littleton, MA 01460 |
Date of Grant: 03/22/2024 Application Dated: 03/15/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.036 | ||
| CC MO | 15C | 2404.0 - 2478.0 | 0.035 |
| CIIPC for this application. Software change to enable QHS mode for this device. Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application TnL23JbD5lraBTCoJ5soWw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 03/22/2024 Application Dated: 03/15/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.036 | ||
| CC MO | 15C | 2404.0 - 2478.0 | 0.035 |
| CIIPC for this application. Software change to enable QHS mode for this device. Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 05/14/2024 Application Dated: 05/13/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.025 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.932 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz and 40 MHz bandwidth modes. This C2PC filing establishes portable category for ASUS platform with models: S5507Q/S5507QA/S5507QAD/K5507Q/V5507Q/P5507CQ, with reducing power through BIOS permanently (not changeable by end-users). SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.65 W/kg and 1.54 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF566-CS-H (Main) and LA9RF567-CS-H (Aux), manufactured by Luxshare-ICT. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application sZaaDrZeknBrKu8vsjnkSw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 05/14/2024 Application Dated: 05/13/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.025 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.932 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz and 40 MHz bandwidth modes. This C2PC filing establishes portable category for ASUS platform with models: S5507Q/S5507QA/S5507QAD/K5507Q/V5507Q/P5507CQ, with reducing power through BIOS permanently (not changeable by end-users). SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.65 W/kg and 1.54 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF566-CS-H (Main) and LA9RF567-CS-H (Aux), manufactured by Luxshare-ICT. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 06/25/2024 Application Dated: 06/21/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.684 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.536 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.206 |
| Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum 4.81 dBi gain) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. This C2PC filing establishes portable category for ASUS platform with models: HT5306Q/JT5306Q, with permanently reducing power through software contorted by the modular manufacturer (Qualcomm, not changeable by end-users). SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.05 W/kg and 1.55 W/kg, respectively. Antenna used - PIFA with Part number: WA-F-LE-02-051 (Main) and WA-F-LE-01-013 (Aux), manufactured by INPAQ. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application REeF+D3aA0Fn70SeYnTBgQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 06/25/2024 Application Dated: 06/21/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.684 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.536 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.206 |
| Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum 4.81 dBi gain) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. This C2PC filing establishes portable category for ASUS platform with models: HT5306Q/JT5306Q, with permanently reducing power through software contorted by the modular manufacturer (Qualcomm, not changeable by end-users). SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.05 W/kg and 1.55 W/kg, respectively. Antenna used - PIFA with Part number: WA-F-LE-02-051 (Main) and WA-F-LE-01-013 (Aux), manufactured by INPAQ. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 11/27/2024 Application Dated: 11/25/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel BE201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.036 | ||
| CC MO | 15C | 2404.0 - 2478.0 | 0.035 |
| CIIPC for this application. Software change to enable QHS mode for this device (based on initial modular manufacturer, certified on 01/21/2024). Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This C2PC filing establishes portable category for ASUS platform with models: UX3407Q, BX3407Q, RX3407Q, UX4507R, BX3407R and RX3407R, with permanently reducing power through BIOS that cannot be changeable by the end-users. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04 W/kg and 1.18 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF586-NB-H, 14008-06220100 (aux) and LA9RF585-NB-H, 14008-06220000 (main), manufactured by LUXSHARE-ICT. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application qMGDXZ9uv/a2J82j+6Y+2Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 11/27/2024 Application Dated: 11/25/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel BE201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.036 | ||
| CC MO | 15C | 2404.0 - 2478.0 | 0.035 |
| CIIPC for this application. Software change to enable QHS mode for this device (based on initial modular manufacturer, certified on 01/21/2024). Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This C2PC filing establishes portable category for ASUS platform with models: UX3407Q, BX3407Q, RX3407Q, UX4507R, BX3407R and RX3407R, with permanently reducing power through BIOS that cannot be changeable by the end-users. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04 W/kg and 1.18 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF586-NB-H, 14008-06220100 (aux) and LA9RF585-NB-H, 14008-06220000 (main), manufactured by LUXSHARE-ICT. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 06/25/2024 Application Dated: 06/21/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.036 | ||
| CC MO | 15C | 2404.0 - 2478.0 | 0.035 |
| CIIPC for this application. Software change to enable QHS mode for this device (based on initial modular manufacturer, certified on 01/21/2024). Single Modular Approval. Power listed is the maximum conducted output power. Co- transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This C2PC filing establishes portable category for ASUS platform with models: HT5306Q/JT5306Q, with permanently reducing power through software contorted by the modular manufacturer (Qualcomm, not changeable by end-users). SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 1.55 W/kg, respectively. Antenna used - PIFA with Part number: WA-F-LE-02-051 (Main) and WA-F-LE-01-013 (Aux), manufactured by INPAQ. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application qgRqvItL9Sk5ZfxKTFKf4g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 06/25/2024 Application Dated: 06/21/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.036 | ||
| CC MO | 15C | 2404.0 - 2478.0 | 0.035 |
| CIIPC for this application. Software change to enable QHS mode for this device (based on initial modular manufacturer, certified on 01/21/2024). Single Modular Approval. Power listed is the maximum conducted output power. Co- transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This C2PC filing establishes portable category for ASUS platform with models: HT5306Q/JT5306Q, with permanently reducing power through software contorted by the modular manufacturer (Qualcomm, not changeable by end-users). SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 1.55 W/kg, respectively. Antenna used - PIFA with Part number: WA-F-LE-02-051 (Main) and WA-F-LE-01-013 (Aux), manufactured by INPAQ. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 03/21/2025 Application Dated: 03/21/2025 |
| ASUSTeK COMPUTER INC. |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK COMPUTER INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.025 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.932 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz and 40 MHz bandwidth modes. This C2PC filing establishes portable category for ASUS platform with models: UX3407Q, BX3407Q, RX3407Q, UX4507R, BX3407R and RX3407R, with permanently reducing power through BIOS that cannot be changeable by the end-users; as well as enabling TAS feature. SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.57 W/kg and 1.18 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF586-NB-H, 14008-06220100 (aux) and LA9RF585-NB-H, 14008-06220000 (main), manufactured by LUXSHARE-ICT. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application NELXoDkjoq7KlUDpbcFsJg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 11/06/2024 Application Dated: 10/15/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.025 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.932 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz and 40 MHz bandwidth modes. This C2PC filing establishes portable category for ASUS platform with models: HT5306Q/JT5306Q, with permanently reducing power through software contorted by the modular manufacturer (Qualcomm, not changeable by end-users); as well as enabling TAS feature via software. SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.48 W/kg and 1.55 W/kg, respectively. Antenna used - PIFA with Part number: WA-F-LE-02-051 (Main) and WA-F-LE-01-013 (Aux), manufactured by INPAQ. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application NELXoDkjoq7KlUDpbcFsJg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 11/06/2024 Application Dated: 10/15/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.025 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.932 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz and 40 MHz bandwidth modes. This C2PC filing establishes portable category for ASUS platform with models: HT5306Q/JT5306Q, with permanently reducing power through software contorted by the modular manufacturer (Qualcomm, not changeable by end-users); as well as enabling TAS feature via software. SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.48 W/kg and 1.55 W/kg, respectively. Antenna used - PIFA with Part number: WA-F-LE-02-051 (Main) and WA-F-LE-01-013 (Aux), manufactured by INPAQ. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 09/09/2024 Application Dated: 07/17/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.036 | ||
| CC MO | 15C | 2404.0 - 2478.0 | 0.035 |
| CIIPC for this application. Software change to enable QHS mode for this device (based on initial modular manufacturer, certified on 01/21/2024). Single Modular Approval. Power listed is the maximum conducted output power. Co- transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This C2PC filing establishes portable category for ASUS platform with models: S5507Q/S5507QA/S5507QAD/K5507Q/V5507Q/P5507CQ/Q5507Q, with permanently reducing power through software contorted by the modular manufacturer (Qualcomm, not changeable by end-users); as well as enabling TAS feature via software. SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 1.54 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF566-CS-H (Main) and LA9RF567-CS-H (Aux), manufactured by Luxshare-ICT. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application kUI5/umHQWzO0eJFjb6JAQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 09/09/2024 Application Dated: 07/17/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.036 | ||
| CC MO | 15C | 2404.0 - 2478.0 | 0.035 |
| CIIPC for this application. Software change to enable QHS mode for this device (based on initial modular manufacturer, certified on 01/21/2024). Single Modular Approval. Power listed is the maximum conducted output power. Co- transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This C2PC filing establishes portable category for ASUS platform with models: S5507Q/S5507QA/S5507QAD/K5507Q/V5507Q/P5507CQ/Q5507Q, with permanently reducing power through software contorted by the modular manufacturer (Qualcomm, not changeable by end-users); as well as enabling TAS feature via software. SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 1.54 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF566-CS-H (Main) and LA9RF567-CS-H (Aux), manufactured by Luxshare-ICT. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 06/25/2024 Application Dated: 06/21/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.025 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.932 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz and 40 MHz bandwidth modes. This C2PC filing establishes portable category for ASUS platform with models: HT5306Q/JT5306Q, with permanently reducing power through software contorted by the modular manufacturer (Qualcomm, not changeable by end-users). SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.48 W/kg and 1.55 W/kg, respectively. Antenna used - PIFA with Part number: WA-F-LE-02-051 (Main) and WA-F-LE-01-013 (Aux), manufactured by INPAQ. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application HG6Wxphapyffuk+cMnPYjQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 06/25/2024 Application Dated: 06/21/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.025 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.932 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz and 40 MHz bandwidth modes. This C2PC filing establishes portable category for ASUS platform with models: HT5306Q/JT5306Q, with permanently reducing power through software contorted by the modular manufacturer (Qualcomm, not changeable by end-users). SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.48 W/kg and 1.55 W/kg, respectively. Antenna used - PIFA with Part number: WA-F-LE-02-051 (Main) and WA-F-LE-01-013 (Aux), manufactured by INPAQ. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle #1 Littleton, MA 01460 |
Date of Grant: 03/22/2024 Application Dated: 03/15/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.025 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.932 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application HE+88BXUoS1sve4gwff1yw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 03/22/2024 Application Dated: 03/15/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.025 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.932 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 05/14/2024 Application Dated: 05/13/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.036 | ||
| CC MO | 15C | 2404.0 - 2478.0 | 0.035 |
| CIIPC for this application. Software change to enable QHS mode for this device (based on initial modular manufacturer, certified on 01/21/2024). Single Modular Approval. Power listed is the maximum conducted output power. Co- transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This C2PC filing establishes portable category for ASUS platform with models: S5507Q/S5507QA/S5507QAD/K5507Q/V5507Q/P5507CQ, with reducing power through BIOS permanently (not changeable by end-users). SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 1.54 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF566-CS-H (Main) and LA9RF567-CS-H (Aux), manufactured by Luxshare-ICT. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application GgTg2iRSlVGsYbkI75kIYQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 05/14/2024 Application Dated: 05/13/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.036 | ||
| CC MO | 15C | 2404.0 - 2478.0 | 0.035 |
| CIIPC for this application. Software change to enable QHS mode for this device (based on initial modular manufacturer, certified on 01/21/2024). Single Modular Approval. Power listed is the maximum conducted output power. Co- transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This C2PC filing establishes portable category for ASUS platform with models: S5507Q/S5507QA/S5507QAD/K5507Q/V5507Q/P5507CQ, with reducing power through BIOS permanently (not changeable by end-users). SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 1.54 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF566-CS-H (Main) and LA9RF567-CS-H (Aux), manufactured by Luxshare-ICT. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 09/09/2024 Application Dated: 07/17/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.158 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.145 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.176 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.146 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.426 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.374 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.456 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.525 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.155 |
| Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. This C2PC filing establishes portable category for ASUS platform with models: S5507Q/S5507QA/S5507QAD/K5507Q/V5507Q/P5507CQ/Q5507Q, with permanently reducing power through software contorted by the modular manufacturer (Qualcomm, not changeable by end-users); as well as enabling TAS feature via software. SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.8 W/kg and 1.54 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF566-CS-H (Main) and LA9RF567-CS-H (Aux), manufactured by Luxshare-ICT. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application GfNTRk+rHTW+U0bT4ThY0w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 09/09/2024 Application Dated: 07/17/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.158 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.145 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.176 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.146 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.426 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.374 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.456 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.525 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.155 |
| Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. This C2PC filing establishes portable category for ASUS platform with models: S5507Q/S5507QA/S5507QAD/K5507Q/V5507Q/P5507CQ/Q5507Q, with permanently reducing power through software contorted by the modular manufacturer (Qualcomm, not changeable by end-users); as well as enabling TAS feature via software. SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.8 W/kg and 1.54 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF566-CS-H (Main) and LA9RF567-CS-H (Aux), manufactured by Luxshare-ICT. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 09/09/2024 Application Dated: 07/17/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.025 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.932 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz and 40 MHz bandwidth modes. This C2PC filing establishes portable category for ASUS platform with models: S5507Q/S5507QA/S5507QAD/K5507Q/V5507Q/P5507CQ/Q5507Q, with permanently reducing power through software contorted by the modular manufacturer (Qualcomm, not changeable by end-users); as well as enabling TAS feature via software. SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.65 W/kg and 1.54 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF566-CS-H (Main) and LA9RF567-CS-H (Aux), manufactured by Luxshare-ICT. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application FNifPlT/rXR/im+wDkQGfw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 09/09/2024 Application Dated: 07/17/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.025 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.932 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz and 40 MHz bandwidth modes. This C2PC filing establishes portable category for ASUS platform with models: S5507Q/S5507QA/S5507QAD/K5507Q/V5507Q/P5507CQ/Q5507Q, with permanently reducing power through software contorted by the modular manufacturer (Qualcomm, not changeable by end-users); as well as enabling TAS feature via software. SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.65 W/kg and 1.54 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF566-CS-H (Main) and LA9RF567-CS-H (Aux), manufactured by Luxshare-ICT. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle #1 Littleton, MA 01460 |
Date of Grant: 03/22/2024 Application Dated: 03/15/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.684 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.536 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.206 |
| Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum 4.81 dBi gain) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application ewD7NFxPHyZHGB/C+lD43A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 03/22/2024 Application Dated: 03/15/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.684 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.536 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.206 |
| Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum 4.81 dBi gain) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 11/27/2024 Application Dated: 11/25/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel BE201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.158 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.145 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.176 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.146 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.426 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.374 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.456 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.525 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.155 |
| Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. This C2PC filing establishes portable category for ASUS platform with models: UX3407Q, BX3407Q, RX3407Q, UX4507R, BX3407R and RX3407R, with permanently reducing power through BIOS that cannot be changeable by the end-users. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.18 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF586-NB-H, 14008-06220100 (aux) and LA9RF585-NB-H, 14008-06220000 (main), manufactured by LUXSHARE-ICT. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application EqL+1tKqgJ6mjpfqqm7lXA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 11/27/2024 Application Dated: 11/25/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNCM825 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel BE201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.158 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.145 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.176 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.146 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.426 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.374 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.456 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.525 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.155 |
| Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. This C2PC filing establishes portable category for ASUS platform with models: UX3407Q, BX3407Q, RX3407Q, UX4507R, BX3407R and RX3407R, with permanently reducing power through BIOS that cannot be changeable by the end-users. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.18 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF586-NB-H, 14008-06220100 (aux) and LA9RF585-NB-H, 14008-06220000 (main), manufactured by LUXSHARE-ICT. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |