FCC ID MSQ9462D2
Intel Wireless-AC 9462
by ASUSTeK Computer Inc
Grantee Code: MSQ Product Code: 9462D2
Latest application date: 2018-05-03
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2018-05-03 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-05-03 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-05-03 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD99462D2 Grant Date: 12/18/2017 | 2018-02-21 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD99462D2 Grant Date: 12/18/2017 | 2018-02-21 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD99462D2 Grant Date: 12/18/2017 | 2018-02-21 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| 9462D2W- UserMan | Users Manual | 2018-05-03 | PDF 4.6 MB |
| 9462D2W- Inpho | Internal Photos | 2018-05-03 | PDF 2 MB |
| 9462D2W- Expho | External Photos | 2018-05-03 | PDF 1.1 MB |
| 9462D2W- Expho | External Photos | 2018-02-21 | PDF 30.3 KB |
| 9462D2W- LabelLoc | ID Label/Location Info | 2018-05-03 | PDF 155.6 KB |
| 9462D2W- Labelsmpl | ID Label/Location Info | 2018-05-03 | PDF 96.6 KB |
| 9462D2W- LabelLoc | ID Label/Location Info | 2018-02-21 | PDF 20.7 KB |
| 9462D2W- LabelSmpl | ID Label/Location Info | 2018-02-21 | PDF 67.5 KB |
| 9462D2W- Tsup | Test Setup Photos | 2018-05-03 | PDF 384 KB |
| 9462D2W- ATTESTATION | Cover Letter(s) | 2018-05-03 | PDF 11.9 KB |
| 9462D2W- ATTESTATION | Cover Letter(s) | 2018-02-21 | PDF 14.8 KB |
| 9462D2W- Class II Change | Cover Letter(s) | 2018-05-03 | PDF 19.3 KB |
| 9462D2W- Confildentiality | Cover Letter(s) | 2018-05-03 | PDF 21.9 KB |
| 9462D2W- DTS-UNII Declaration letter | Cover Letter(s) | 2018-05-03 | PDF 31.4 KB |
| 9462D2W- Declaration of authorization | Cover Letter(s) | 2018-05-03 | PDF 14.1 KB |
| 9462D2W- Doc Letter | Cover Letter(s) | 2018-05-03 | PDF 14.7 KB |
| 9462D2W- Declaration letter for electrically identical | Cover Letter(s) | 2018-02-21 | PDF 20.6 KB |
| 9462D2W- Declaration of authorization | Cover Letter(s) | 2018-02-21 | PDF 16.6 KB |
| 9462D2W- FCC Auth Ltr Change of ID | Cover Letter(s) | 2018-02-21 | PDF 65 KB |
| 9462D2W- TestRpt-SAR-0502 | RF Exposure Info | 2018-05-03 | PDF 4.5 MB |
| Confidential_9462D2W- BlkDia Metadata only | Block Diagram | PDF 2.2 MB | |
| Confidential_9462D2W- Schem Metadata only | Schematics | PDF 3.3 MB | |
| Confidential_9462D2W- OPDes-0502 Metadata only | Operational Description | PDF 298.9 KB |
Application Information
| Application ID | gelWl++JPVQtZzfgSkT0Vw== |
|---|---|
| Final Action Date | 2018-05-03 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0005821988 |
| Model | 9462D2 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Intel Wireless-AC 9462 |
| Responsible Party | Jackson Yen, Associate Vice President, jackson_yen@asus.com  , +886-2-28943447 |
| Technical Contact | Valentina Wu, DEKRA Testing and Certification Co., Ltd, valentina.wu@dekra.com  , 886-2-2602-7968 |
| Test Firm | Vincent Lin, DEKRA TESTING AND CERTIFICATION Lin Kou Lab., vincent.lin@dekra.com , 886286013788 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS TP203M, J203M, R211M and E207M, with antenna Hong-Bo, part no. 260-26141, 260-26142, 14008- 02410000, 14008-02410100 and LUXSHARE, part no. LA9RF007-CS-H, LA9RF006-CS-H, 14008-02410200, 14008-02410300. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.53W/kg respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| gelWl++JPVQtZzfgSkT0Vw== | 2018-05-03 | Class II permissive change or modification of presently authorized equipment |
| eaGqoZht2LHFSNVtVGcSUQ== | 2018-05-03 | Class II permissive change or modification of presently authorized equipment |
| WMa6lwfFtQVQVH1UiSEeTQ== | 2018-05-03 | Class II permissive change or modification of presently authorized equipment |
| dIVY4500ZiqXQERwlbmNIA== | 2018-02-21 | Change in identification of presently authorized equipment. Original FCC ID: PD99462D2 Grant Date: 12/18/2017 |
| asaWUZybi+T50iislwdujA== | 2018-02-21 | Change in identification of presently authorized equipment. Original FCC ID: PD99462D2 Grant Date: 12/18/2017 |
| GSl9N9X0xGJz9GPvX5fTOA== | 2018-02-21 | Change in identification of presently authorized equipment. Original FCC ID: PD99462D2 Grant Date: 12/18/2017 |
| 5RGlQsTZdOgHtQMDCA1+YA== | 2018-02-21 | Change in identification of presently authorized equipment. Original FCC ID: PD99462D2 Grant Date: 12/18/2017 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.008 | 15C | CC |
| 2402-2480 MHz | 0.0100000 | 15C | CC |
| 2412-2472 MHz | 0.637 | 15C | CC, MO |
| 2422-2462 MHz | 0.238 | 15C | CC, MO |
| 5190-5230 MHz | 0.093 | 15E | CC, MO |
| 5190-5230 MHz | 0.093 | 15E | 38, CC, MO |
| 5210 MHz | 0.032 | 15E | CC, MO |
| 5210 MHz | 0.032 | 15E | 38, CC, MO |
| 5260-5320 MHz | 0.142 | 15E | CC, MO, ND |
| 5260-5320 MHz | 0.142 | 15E | 38, CC, MO, ND |
| 5270-5310 MHz | 0.082 | 15E | CC, MO, ND |
| 5270-5310 MHz | 0.082 | 15E | 38, CC, MO, ND |
| 5290 MHz | 0.043 | 15E | CC, MO, ND |
| 5290 MHz | 0.043 | 15E | 38, CC, MO, ND |
| 5500-5700 MHz | 0.134 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.134 | 15E | 38, CC, MO, ND |
| 5510-5670 MHz | 0.138 | 15E | CC, MO, ND |
| 5510-5670 MHz | 0.138 | 15E | 38, CC, MO, ND |
| 5530-5690 MHz | 0.091 | 15E | CC, MO, ND |
| 5530-5690 MHz | 0.091 | 15E | 38, CC, MO, ND |
| 5710 MHz | 0.09 | 15E | CC, MO, ND |
| 5710 MHz | 0.09 | 15E | 38, CC, MO, ND |
| 5720 MHz | 0.082 | 15E | CC, MO, ND |
| 5720 MHz | 0.082 | 15E | 38, CC, MO, ND |
| 5745-5825 MHz | 0.143 | 15E | CC, MO |
| 5745-5825 MHz | 0.143 | 15E | 38, CC, MO |
| 5755-5795 MHz | 0.145 | 15E | CC, MO |
| 5755-5795 MHz | 0.145 | 15E | 38, CC, MO |
| 5775 MHz | 0.03 | 15E | CC, MO |
| 5775 MHz | 0.03 | 15E | 38, CC, MO |
Grants
TCB Grant - Application WMa6lwfFtQVQVH1UiSEeTQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/03/2018 Application Dated: 05/02/2018 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ9462D2 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS TP203M, J203M, R211M and E207M, with antenna Hong-Bo, part no. 260-26141, 260-26142, 14008- 02410000, 14008-02410100 and LUXSHARE, part no. LA9RF007-CS-H, LA9RF006-CS-H, 14008-02410200, 14008-02410300. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.53W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application WMa6lwfFtQVQVH1UiSEeTQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 05/03/2018 Application Dated: 05/02/2018 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ9462D2 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS TP203M, J203M, R211M and E207M, with antenna Hong-Bo, part no. 260-26141, 260-26142, 14008- 02410000, 14008-02410100 and LUXSHARE, part no. LA9RF007-CS-H, LA9RF006-CS-H, 14008-02410200, 14008-02410300. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.53W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/21/2018 Application Dated: 02/21/2018 |
| ASUSTeK Computer Inc |
| 4F, No. 150, Li-Te Rd. |
| Peitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ9462D2 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
EAS Grant - Application GSl9N9X0xGJz9GPvX5fTOA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 4F, No. 150, Li-Te Rd. Peitou, Taipei, 112 Taiwan |
Date of Grant: 02/21/2018 Application Dated: 02/21/2018 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ9462D2 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/03/2018 Application Dated: 05/03/2018 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ9462D2 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.14 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.093 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.032 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.142 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.082 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.043 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.134 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.138 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.09 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.082 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.091 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.143 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.145 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.03 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS TP203M, J203M, R211M and E207M, with antenna Hong-Bo, part no. 260-26141, 260-26142, 14008- 02410000, 14008-02410100 and LUXSHARE, part no. LA9RF007-CS-H, LA9RF006-CS-H, 14008-02410200, 14008-02410300. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.53W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application gelWl++JPVQtZzfgSkT0Vw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 05/03/2018 Application Dated: 05/03/2018 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ9462D2 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.14 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.093 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.032 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.142 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.082 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.043 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.134 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.138 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.09 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.082 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.091 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.143 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.145 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.03 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS TP203M, J203M, R211M and E207M, with antenna Hong-Bo, part no. 260-26141, 260-26142, 14008- 02410000, 14008-02410100 and LUXSHARE, part no. LA9RF007-CS-H, LA9RF006-CS-H, 14008-02410200, 14008-02410300. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.53W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/03/2018 Application Dated: 05/02/2018 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ9462D2 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.637 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.238 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS TP203M, J203M, R211M and E207M, with antenna Hong-Bo, part no. 260-26141, 260-26142, 14008- 02410000, 14008-02410100 and LUXSHARE, part no. LA9RF007-CS-H, LA9RF006-CS-H, 14008-02410200, 14008-02410300. The highest reported Body and Simultaneous SAR values are 1.17W/kg and 1.53W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application eaGqoZht2LHFSNVtVGcSUQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 05/03/2018 Application Dated: 05/02/2018 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ9462D2 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.637 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.238 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS TP203M, J203M, R211M and E207M, with antenna Hong-Bo, part no. 260-26141, 260-26142, 14008- 02410000, 14008-02410100 and LUXSHARE, part no. LA9RF007-CS-H, LA9RF006-CS-H, 14008-02410200, 14008-02410300. The highest reported Body and Simultaneous SAR values are 1.17W/kg and 1.53W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/21/2018 Application Dated: 02/21/2018 |
| ASUSTeK Computer Inc |
| 4F, No. 150, Li-Te Rd. |
| Peitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ9462D2 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.14 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.093 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.032 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.142 | ||
| 38 CC MO ND | 15E | 5270.0 - 5310.0 | 0.082 | ||
| 38 CC MO ND | 15E | 5290.0 - 5290.0 | 0.043 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.134 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.138 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.09 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.082 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.091 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.143 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.145 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.03 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 0.80W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application dIVY4500ZiqXQERwlbmNIA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 4F, No. 150, Li-Te Rd. Peitou, Taipei, 112 Taiwan |
Date of Grant: 02/21/2018 Application Dated: 02/21/2018 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ9462D2 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.14 | ||
| 38 CC MO | 15E | 5190.0 - 5230.0 | 0.093 | ||
| 38 CC MO | 15E | 5210.0 - 5210.0 | 0.032 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.142 | ||
| 38 CC MO ND | 15E | 5270.0 - 5310.0 | 0.082 | ||
| 38 CC MO ND | 15E | 5290.0 - 5290.0 | 0.043 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.134 | ||
| 38 CC MO ND | 15E | 5510.0 - 5670.0 | 0.138 | ||
| 38 CC MO ND | 15E | 5710.0 - 5710.0 | 0.09 | ||
| 38 CC MO ND | 15E | 5720.0 - 5720.0 | 0.082 | ||
| 38 CC MO ND | 15E | 5530.0 - 5690.0 | 0.091 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.143 | ||
| 38 CC MO | 15E | 5755.0 - 5795.0 | 0.145 | ||
| 38 CC MO | 15E | 5775.0 - 5775.0 | 0.03 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 0.80W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/21/2018 Application Dated: 02/21/2018 |
| ASUSTeK Computer Inc |
| 4F, No. 150, Li-Te Rd. |
| Peitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ9462D2 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 0.80W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application asaWUZybi+T50iislwdujA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 4F, No. 150, Li-Te Rd. Peitou, Taipei, 112 Taiwan |
Date of Grant: 02/21/2018 Application Dated: 02/21/2018 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ9462D2 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 0.80W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/21/2018 Application Dated: 02/21/2018 |
| ASUSTeK Computer Inc |
| 4F, No. 150, Li-Te Rd. |
| Peitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ9462D2 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.637 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.238 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.44W/kg and 0.80W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 5RGlQsTZdOgHtQMDCA1+YA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 4F, No. 150, Li-Te Rd. Peitou, Taipei, 112 Taiwan |
Date of Grant: 02/21/2018 Application Dated: 02/21/2018 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ9462D2 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless-AC 9462 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.637 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.238 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.44W/kg and 0.80W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |