FCC ID MSQAX201NG
Intel WIFI 6 AX201
by ASUSTeK COMPUTER INC.
Grantee Code: MSQ Product Code: AX201NG
Latest application date: 2025-04-15
FCC ID Device Details
Linked Records
Barcode records decoded from published FCC label exhibits or linked by an explicit FCC ID reference on a product page.
| UPC / GTIN | Linked product |
|---|---|
| 420552302313 UPC-A · GTIN-14 00420552302313 | Notebook PC with Bluetooth and WiFi Brand: MediaTek Inc. · Model: MT7921 Source: FCC label |
| 1510509920000 EAN-13 · GTIN-14 01510509920000 | Intel WIFI 6 AX201 Brand: ASUSTeK Computer Inc · Model: AX201NG Source: FCC label |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-15 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-15 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-15 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-12-07 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2024-12-07 |
| 5855 MHz | Class II permissive change or modification of presently authorized equipment | 2024-12-07 |
| 5855 MHz | Class II permissive change or modification of presently authorized equipment | 2024-12-03 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-12-03 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2024-12-03 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-03-15 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-03-15 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-03-15 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-11 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-11 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-11 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-04-26 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2023-04-26 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-04-26 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2022-12-22 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-12-22 |
| 5775 MHz | Class II permissive change or modification of presently authorized equipment | 2022-12-22 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2022-12-14 |
| 5775 MHz | Class II permissive change or modification of presently authorized equipment | 2022-08-28 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-08-28 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2022-08-28 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-07-11 |
| 5775 MHz | Class II permissive change or modification of presently authorized equipment | 2022-07-11 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-07-11 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-06-23 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2022-06-23 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2022-06-23 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2022-04-19 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-04-19 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2022-04-19 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-02-14 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-02-14 |
| 5775 MHz | Class II permissive change or modification of presently authorized equipment | 2022-02-14 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-01-11 |
| 5775 MHz | Class II permissive change or modification of presently authorized equipment | 2022-01-11 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-01-11 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-08-19 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-08-19 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-08-19 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-08-06 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-08-06 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-08-06 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-02-21 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-02-21 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-02-21 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-01-26 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-01-26 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-01-26 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-01-04 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-01-04 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-01-04 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-10-20 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2020-10-20 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-10-19 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-05-13 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2020-05-13 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-05-12 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2019-12-27 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-12-27 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-12-27 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-09-27 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-09-27 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2019-09-27 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-09-10 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-09-10 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2019-09-10 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2019-09-06 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-09-06 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-09-06 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9AX201NG Grant Date: 01/28/2019 | 2019-03-08 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9AX201NG Grant Date: 01/28/2019 | 2019-03-08 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9AX201NG Grant Date: 01/28/2019 | 2019-03-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| E26061_E1600WKA_QSG_V3 | Users Manual | 2025-10-12 | PDF 1.6 MB |
| UM_24pages_release6 | Users Manual | 2025-06-05 | PDF 1 MB |
| E22765_B3402FVA_EM_draft1 | Users Manual | 2024-09-04 | PDF 5.7 MB |
| E22766_B3402FVA_UM_240219 | Users Manual | 2024-09-04 | PDF 1.3 MB |
| TempConfidential_E22889_BR1104_BR1204CGA_FGA_EM_draft1 | Users Manual | 2024-07-09 | PDF 2.4 MB |
| TempConfidential_E22890_BR1104_BR1204CGA_FGA_UM_28pages_draft1 | Users Manual | 2024-07-09 | PDF 680.2 KB |
| TempConfidential_Q22891_BR1104_BR1204CGA_FGA_QSG_draft1 | Users Manual | 2024-07-09 | PDF 546.6 KB |
| Internal_Photo | Internal Photos | 2025-10-12 | PDF 3.3 MB |
| Internal_Photo | Internal Photos | 2025-06-05 | PDF 5.1 MB |
| Internal_Photo | Internal Photos | 2024-12-03 | PDF 3 MB |
| Internal_Photo | Internal Photos | 2024-09-04 | PDF 4.4 MB |
| TempConfidential_ASUS BR1204_Antenna Photos_INNOWAVE_STC _PAD mode | Internal Photos | 2024-07-09 | PDF 106 KB |
| TempConfidential_ASUS BR1204_Antenna Photos_INPAQ_STC _PAD mode | Internal Photos | 2024-07-09 | PDF 204.5 KB |
| TempConfidential_C23O165_EUT Internal Photos_FCC_1220 | Internal Photos | 2024-07-09 | PDF 3 MB |
| External_Photo | External Photos | 2025-10-12 | PDF 2.4 MB |
| External_photo | External Photos | 2025-06-05 | PDF 3.4 MB |
| External_photo | External Photos | 2024-12-03 | PDF 2.3 MB |
| External_photo | External Photos | 2024-09-04 | PDF 3 MB |
| TempConfidential_C23O165_EUT External Photos_FCC_1220 | External Photos | 2024-07-09 | PDF 2.4 MB |
| TempConfidential_C23O165_EUT External Photos_FCC_1220.pdf | External Photos | 2024-07-09 | PDF 2.4 MB |
| EJ3L9000300_RATING_NP | ID Label/Location Info | 2025-04-15 | PDF 1.8 MB |
| HAGTJ_label_location | ID Label/Location Info | 2025-04-15 | PDF 4.5 MB |
| HGB41000300_LABEL | ID Label/Location Info | 2025-04-15 | PDF 473.6 KB |
| Label_FX707_AX201 | ID Label/Location Info | 2024-12-07 | PDF 3.4 MB |
| Label_info_FX707_AX201 | ID Label/Location Info | 2024-12-07 | PDF 87.7 KB |
| Label | ID Label/Location Info | 2024-12-03 | PDF 738.2 KB |
| Label | ID Label/Location Info | 2024-03-15 | PDF 227 KB |
| TsUp_SouthStar_Antenna | Test Setup Photos | 2025-10-12 | PDF 663.8 KB |
| Tsup_HTK_Antenna | Test Setup Photos | 2025-10-12 | PDF 578.9 KB |
| Tsup_SAR | Test Setup Photos | 2025-10-12 | PDF 174.6 KB |
| AWAN_Antenna_Photos | Test Setup Photos | 2025-06-05 | PDF 286.3 KB |
| INPAQ_Antenna_Photos | Test Setup Photos | 2025-06-05 | PDF 224.4 KB |
| Tsup_SAR | Test Setup Photos | 2025-06-05 | PDF 180.1 KB |
| Tsup_SAR | Test Setup Photos | 2024-12-03 | PDF 169.6 KB |
| B3402FBA_AntennaPhotos | Test Setup Photos | 2024-09-04 | PDF 481.6 KB |
| B3402FVA_INPAQ_AntennaPhotos | Test Setup Photos | 2024-09-04 | PDF 399.7 KB |
| Tsup_SAR | Test Setup Photos | 2024-09-04 | PDF 422.3 KB |
| Tsup_SAR | Test Setup Photos | 2024-09-04 | PDF 1.3 MB |
| TempConfidential_USSC23O165001-01_Intel_AX201NGW_Appendix E_Test Setup Photograp | Test Setup Photos | 2024-07-09 | PDF 869.1 KB |
| E16_HTK_Antenna report_20211229 | Test Report | 2025-04-15 | PDF 1.9 MB |
| E16_SouthStar_Antenna report_20211229 | Test Report | 2025-04-15 | PDF 760 KB |
| AWAN_Anteena_Datasheet | Test Report | 2024-12-07 | PDF 743.7 KB |
| INPAQ_Anteena_Datasheet | Test Report | 2024-12-07 | PDF 816.6 KB |
| ASUS_AWAN_Antenna_datasheet | Test Report | 2024-12-03 | PDF 743.1 KB |
| ASUS_INPAQ_Antenna_datasheet | Test Report | 2024-12-03 | PDF 608.6 KB |
| B3402FBA_AntennaDatasheet_NB | Test Report | 2024-03-15 | PDF 561.9 KB |
| B3402FBA_AntennaDatasheet_PAD | Test Report | 2024-03-15 | PDF 572.8 KB |
| B3402FVA_NB_Datasheet | Test Report | 2024-03-15 | PDF 625.9 KB |
| B3402FVA_PAD_Datasheet | Test Report | 2024-03-15 | PDF 945.1 KB |
| Attestation_Statements_Part2.911(d)(5) | Attestation Statements | 2025-04-15 | PDF 268.4 KB |
| Attestation_Statements_Part2.911(d)(7) | Attestation Statements | 2025-04-15 | PDF 245.5 KB |
| Attestation_Statements_Part2.911_d_5 | Attestation Statements | 2024-12-07 | PDF 255.8 KB |
| Attestation_Statements_Part2.911_d_7 | Attestation Statements | 2024-12-07 | PDF 244.7 KB |
| Attestation_Statements_Part2.911(d)(5) | Attestation Statements | 2024-03-15 | PDF 217.6 KB |
| Attestation_Statements_Part2.911(d)(7) | Attestation Statements | 2024-03-15 | PDF 290.1 KB |
| C2PC_letter | Cover Letter(s) | 2025-04-15 | PDF 211.1 KB |
| Confidentiality_Request_Letter | Cover Letter(s) | 2025-04-15 | PDF 233.9 KB |
| POA | Cover Letter(s) | 2025-04-15 | PDF 234.1 KB |
| C2PC_Letter | Cover Letter(s) | 2024-12-07 | PDF 213.5 KB |
| Confidentiality Letter | Cover Letter(s) | 2024-12-07 | PDF 223.9 KB |
| Models_Difference_Description_Letter_Signed | Cover Letter(s) | 2024-12-07 | PDF 197.8 KB |
| POA | Cover Letter(s) | 2024-12-07 | PDF 227 KB |
| C2PC_letter | Cover Letter(s) | 2024-12-03 | PDF 213.4 KB |
| Confidentiality_Request_Letter | Cover Letter(s) | 2024-12-03 | PDF 220.8 KB |
| Models_Difference_DescriptionLetter | Cover Letter(s) | 2024-12-03 | PDF 194.7 KB |
| POA | Cover Letter(s) | 2024-12-03 | PDF 224 KB |
| C2PC_Letter | Cover Letter(s) | 2024-03-15 | PDF 221.2 KB |
| Confidentiality_Request_Letter | Cover Letter(s) | 2024-03-15 | PDF 218.3 KB |
| Models_Difference_DescriptionLetter | Cover Letter(s) | 2024-03-15 | PDF 221.2 KB |
| POA | Cover Letter(s) | 2024-03-15 | PDF 222.1 KB |
| USSC252296001_Intel_AX201NGW_SAR | RF Exposure Info | 2025-04-15 | PDF 1.5 MB |
| USSC252296001_Intel_AX201NGW_SAR_AppB | RF Exposure Info | 2025-04-15 | PDF 419.3 KB |
| USSC252296001_Intel_AX201NGW_SAR_AppC | RF Exposure Info | 2025-04-15 | PDF 468.5 KB |
| USSC252296001_Intel_AX201NGW_SAR_AppD | RF Exposure Info | 2025-04-15 | PDF 2.1 MB |
| USSC252296001_Intel_AX201NGW_SAR_AppE | RF Exposure Info | 2025-04-15 | PDF 1.9 MB |
| USSC24O175001_SAR | RF Exposure Info | 2024-12-07 | PDF 1.5 MB |
| USSC24O175001_SAR_AppB | RF Exposure Info | 2024-12-07 | PDF 244.2 KB |
| USSC24O175001_SAR_AppC | RF Exposure Info | 2024-12-07 | PDF 411.2 KB |
| USSC24O175001_SAR_AppD | RF Exposure Info | 2024-12-07 | PDF 1.5 MB |
| USSC24O175001_SAR_AppE | RF Exposure Info | 2024-12-07 | PDF 1.2 MB |
| USSC24O179001_SAR_AppB | RF Exposure Info | 2024-12-03 | PDF 266 KB |
| USSC24O179001_SAR_AppC | RF Exposure Info | 2024-12-03 | PDF 420.5 KB |
| USSC24O179001_SAR_AppD | RF Exposure Info | 2024-12-03 | PDF 1.8 MB |
| USSC24O179001_SAR_AppE | RF Exposure Info | 2024-12-03 | PDF 1.2 MB |
| USSC24O179001_SAR_r1 | RF Exposure Info | 2024-12-03 | PDF 1.5 MB |
| USSC23D321001_SAR | RF Exposure Info | 2024-03-15 | PDF 982 KB |
| USSC23D321001_SAR_AppendixA | RF Exposure Info | 2024-03-15 | PDF 521 KB |
| USSC23D321001_SAR_AppendixB | RF Exposure Info | 2024-03-15 | PDF 152.5 KB |
| USSC23D321001_SAR_AppendixC | RF Exposure Info | 2024-03-15 | PDF 177.8 KB |
| USSC23D321001_SAR_AppendixD | RF Exposure Info | 2024-03-15 | PDF 2.1 MB |
Application Information
| Application ID | xFxArIqBIdSPQy0EIxH6zQ== |
|---|---|
| Final Action Date | 2025-04-15 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0005821988 |
| Model | AX201NG |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Intel WIFI 6 AX201 |
| Responsible Party | Jackson Yen, Associate Vice President, jackson_yen@asus.com  , +886-2-28943447 |
| Test Firm | Fly Lu, Eurofins E&E Wireless Taiwan Co., Ltd., Fly.lu@cpt.eurofinsasia.com  , +886-3-2710188 |
| TCB Email | bentje.holger@phoenix-testlab.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 10/12/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.C2PC: Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, All-in-one PC, model number: E1600WK.; Brand: ASUS, with antenna High-Tek, model no.: 0ACCN021036N and 0ACCN021035N, antenna SOUTHSTAR, model no.: N12-8030-R0A and N12- 8029-R0A. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are <0.10 W/kg and 0.76 W/kg at 1g tissues, respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| xFxArIqBIdSPQy0EIxH6zQ== | 2025-04-15 | Class II permissive change or modification of presently authorized equipment |
| tYlx3ibiXCUo87YDGMEJhQ== | 2025-04-15 | Class II permissive change or modification of presently authorized equipment |
| Sv/HHJjLG/0kaHTSeY4yqw== | 2025-04-15 | Class II permissive change or modification of presently authorized equipment |
| ZdgHNB3CLEJ+go+TRC8O5g== | 2024-12-07 | Class II permissive change or modification of presently authorized equipment |
| Lecs3ijE754H2aKPhQtCKA== | 2024-12-07 | Class II permissive change or modification of presently authorized equipment |
| IoTYnAi50QS0DFngaKeJPA== | 2024-12-07 | Class II permissive change or modification of presently authorized equipment |
| mW/KRdXe1EkuiMO47M0/fw== | 2024-12-03 | Class II permissive change or modification of presently authorized equipment |
| hDNkyGd2KWo+2KzceN5UVw== | 2024-12-03 | Class II permissive change or modification of presently authorized equipment |
| 8a8qpwKZPtKn8gJUFJHSeQ== | 2024-12-03 | Class II permissive change or modification of presently authorized equipment |
| yWxe9ZRipJ9QB0FpQzmVtg== | 2024-03-15 | Class II permissive change or modification of presently authorized equipment |
| gsP60PWgj43RxR0c62RaWQ== | 2024-03-15 | Class II permissive change or modification of presently authorized equipment |
| enfQQjagXR7RO9pE2aqqyA== | 2024-03-15 | Class II permissive change or modification of presently authorized equipment |
| ucBh9uOWIx4XaYe8i03CRg== | 2024-01-11 | Class II permissive change or modification of presently authorized equipment |
| RKZ6rutJ15zMPO/aVnI4qg== | 2024-01-11 | Class II permissive change or modification of presently authorized equipment |
| 95/9s6YpmSE9CZ96l4YBEg== | 2024-01-11 | Class II permissive change or modification of presently authorized equipment |
| hNYEkVNh5ELRlCuNFr9QZA== | 2023-04-26 | Class II permissive change or modification of presently authorized equipment |
| c4vbRCEeA8Vd7DTnr8YMsQ== | 2023-04-26 | Class II permissive change or modification of presently authorized equipment |
| 4oo1SWx0Tu8iXlm3X98kSQ== | 2023-04-26 | Class II permissive change or modification of presently authorized equipment |
| yXYMJqdvTR+KS0FiXvNU0A== | 2022-12-22 | Class II permissive change or modification of presently authorized equipment |
| ltWRqZhEvq+y5H+E7UuTLA== | 2022-12-22 | Class II permissive change or modification of presently authorized equipment |
| 4fPVMazqNJYSsj5aWuYbNA== | 2022-12-22 | Class II permissive change or modification of presently authorized equipment |
| uFcXta3JF4isFsM9Jj9XJg== | 2022-12-14 | Class II permissive change or modification of presently authorized equipment |
| xDORKYV49NlEW0B4QqNU7A== | 2022-08-28 | Class II permissive change or modification of presently authorized equipment |
| mNe8mmDFPyrQq5hD4klebg== | 2022-08-28 | Class II permissive change or modification of presently authorized equipment |
| ZrMsCE4VUPuYH/eKTaQ24Q== | 2022-08-28 | Class II permissive change or modification of presently authorized equipment |
| kCZ5gHg6LjOrAiM6Q3IRtQ== | 2022-07-11 | Class II permissive change or modification of presently authorized equipment |
| UDkiHBthxQuJYGU6AWrWgA== | 2022-07-11 | Class II permissive change or modification of presently authorized equipment |
| Q1XEiZdQx+X9jX/hs1De9g== | 2022-07-11 | Class II permissive change or modification of presently authorized equipment |
| v4HCFY7F/6ZWIzBCSrviJQ== | 2022-06-23 | Class II permissive change or modification of presently authorized equipment |
| s5w7Ck2dDqCQfoAJLV7KUA== | 2022-06-23 | Class II permissive change or modification of presently authorized equipment |
| 5gtGrHQSpxKgMmFgK1Hotw== | 2022-06-23 | Class II permissive change or modification of presently authorized equipment |
| pnnvIM+VaaSpvsS297YwUQ== | 2022-04-19 | Class II permissive change or modification of presently authorized equipment |
| TyajebbwCEofk23/J8XGmg== | 2022-04-19 | Class II permissive change or modification of presently authorized equipment |
| /Zvjo1Ph6p8PjDVC5xropg== | 2022-04-19 | Class II permissive change or modification of presently authorized equipment |
| xvxSFJWkUCcLBV/zZZO4gQ== | 2022-02-14 | Class II permissive change or modification of presently authorized equipment |
| d90FfEB9hPWgqvVqBAW0Fw== | 2022-02-14 | Class II permissive change or modification of presently authorized equipment |
| bBjNqExDG3bQwbudPtvgSg== | 2022-02-14 | Class II permissive change or modification of presently authorized equipment |
| oFCJmLzt/xYP8temxxSdng== | 2022-01-11 | Class II permissive change or modification of presently authorized equipment |
| PM6hhqI9Jo0p+0ImGKdO2g== | 2022-01-11 | Class II permissive change or modification of presently authorized equipment |
| HTkrRryrfrr2KojyXiZJuQ== | 2022-01-11 | Class II permissive change or modification of presently authorized equipment |
| qQTbwvaGEFWGT8PPvgStsA== | 2021-08-19 | Class II permissive change or modification of presently authorized equipment |
| NZs6JF4mK/M/x240a2hZig== | 2021-08-19 | Class II permissive change or modification of presently authorized equipment |
| II286xdatSLwmk4LV4CRfA== | 2021-08-19 | Class II permissive change or modification of presently authorized equipment |
| blQvZ4DAg0LaVo9EV99W4A== | 2021-08-06 | Class II permissive change or modification of presently authorized equipment |
| C+DWPrgiAXq/bzGCWE6jXA== | 2021-08-06 | Class II permissive change or modification of presently authorized equipment |
| 8hyWBU/LXARb3tOIXW4AWw== | 2021-08-06 | Class II permissive change or modification of presently authorized equipment |
| Kc+Mpt4OpS9PjdYbdhH/iA== | 2021-02-21 | Class II permissive change or modification of presently authorized equipment |
| DITpXn9LzdjlaIlmnFqIrQ== | 2021-02-21 | Class II permissive change or modification of presently authorized equipment |
| 8XCt/mowHOSXTZlOyfbWKg== | 2021-02-21 | Class II permissive change or modification of presently authorized equipment |
| o1y8QTLC0cdzh5wLJcimVg== | 2021-01-26 | Class II permissive change or modification of presently authorized equipment |
| dcpmzA2HvpldJj8vhwiUMA== | 2021-01-26 | Class II permissive change or modification of presently authorized equipment |
| +4aN7OeHdGEW9cGex9qF2A== | 2021-01-26 | Class II permissive change or modification of presently authorized equipment |
| ie4ZU8lqIlMkgaINrW+fQg== | 2021-01-04 | Class II permissive change or modification of presently authorized equipment |
| MnMhtbUDPhiQFKj7KEWymg== | 2021-01-04 | Class II permissive change or modification of presently authorized equipment |
| LfZIsgnU8amSB+KOSqNsFQ== | 2021-01-04 | Class II permissive change or modification of presently authorized equipment |
| TKvVhSGwYkya4BxvNmr95w== | 2020-10-20 | Class II permissive change or modification of presently authorized equipment |
| TIUb8PEsJfmRUdNDPWf3ag== | 2020-10-20 | Class II permissive change or modification of presently authorized equipment |
| bGNMA9WApMPW6R9EeBF6/A== | 2020-10-19 | Class II permissive change or modification of presently authorized equipment |
| LiOQQUjlu6ygmfwfuFJkrg== | 2020-05-13 | Class II permissive change or modification of presently authorized equipment |
| LQSbQuYJ6OFN9vUrZhcmJA== | 2020-05-13 | Class II permissive change or modification of presently authorized equipment |
| KDUC9Iif1mia210tiPewJQ== | 2020-05-12 | Class II permissive change or modification of presently authorized equipment |
| tVS2de+rz1YZ7lxbY1VFTA== | 2019-12-27 | Class II permissive change or modification of presently authorized equipment |
| cSqvVbw9SkWR1nEfwDQQkg== | 2019-12-27 | Class II permissive change or modification of presently authorized equipment |
| IsOU7l8w8aSwmMAGipNlKQ== | 2019-12-27 | Class II permissive change or modification of presently authorized equipment |
| TLZJtnfasPNICRYKy0PATg== | 2019-09-27 | Class II permissive change or modification of presently authorized equipment |
| R/Cwavh6i97SDWZUCKzqQQ== | 2019-09-27 | Class II permissive change or modification of presently authorized equipment |
| 9KEnvLB3t+ey8N1XwxHX4g== | 2019-09-27 | Class II permissive change or modification of presently authorized equipment |
| XnBB0ukZfVJzDpfhHP8cPA== | 2019-09-10 | Class II permissive change or modification of presently authorized equipment |
| UjY5+I9l8RNK2nqQFQ465A== | 2019-09-10 | Class II permissive change or modification of presently authorized equipment |
| MHOqNjLYK1u3Fyrh3rE/cA== | 2019-09-10 | Class II permissive change or modification of presently authorized equipment |
| mW9+7kRhqVfKW1HZLrL7Aw== | 2019-09-06 | Class II permissive change or modification of presently authorized equipment |
| Z8Dx9c/0ci2m4a8NJDOfhQ== | 2019-09-06 | Class II permissive change or modification of presently authorized equipment |
| A93ayLUOzsFRBn7xEG29Ow== | 2019-09-06 | Class II permissive change or modification of presently authorized equipment |
| r2yCqOyteU6H1PllyvMB2g== | 2019-03-08 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX201NG Grant Date: 01/28/2019 |
| l3X5FJRKQNFN+gPWmUNePA== | 2019-03-08 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX201NG Grant Date: 01/28/2019 |
| gu9zNm5iTvR5SZ2+ft2pPg== | 2019-03-08 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX201NG Grant Date: 01/28/2019 |
| 90mpNvbBYmp5wZWnXlYx+A== | 2019-03-08 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX201NG Grant Date: 01/28/2019 |
Equipment Authorization
Grants
TCB Grant - Application ZrMsCE4VUPuYH/eKTaQ24Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 08/28/2022 Application Dated: 08/26/2022 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.986 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.642 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host ASUS notebook PC, models B5602FB and B5602CB with the antenna South-Star, part no. DC33002QA00 (3.N201.0192), DC33002QA10(3.N201.0193) and antenna Pulse, part no. DC33002Q900(TZ2283D), DC33002Q910(TZ2283E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.10 W/kg and 1.48 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application ZrMsCE4VUPuYH/eKTaQ24Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 08/28/2022 Application Dated: 08/26/2022 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.986 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.642 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host ASUS notebook PC, models B5602FB and B5602CB with the antenna South-Star, part no. DC33002QA00 (3.N201.0192), DC33002QA10(3.N201.0193) and antenna Pulse, part no. DC33002Q900(TZ2283D), DC33002Q910(TZ2283E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.10 W/kg and 1.48 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 12/07/2024 Application Dated: 12/06/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wi-Fi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. C2PC: Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: FX607V, FX607VI, FX607VV, FX607VU, FX607VJ, FX607VB, FX607VUR, FX607VBR, TUF607V, TUF607VU, TUF607VB, TUF607VUR, TUF667V, TUF667VU, TUF667VB, TUF667VUR; Brand: ASUS, with antenna AWAN, model no.: AYP6Y-200040 and INPAQ, model no.: WA-P-LELE-04-006. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.16 W/kg and 0.83 W/kg at 1g tissues, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ZdgHNB3CLEJ+go+TRC8O5g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 12/07/2024 Application Dated: 12/06/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wi-Fi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. C2PC: Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: FX607V, FX607VI, FX607VV, FX607VU, FX607VJ, FX607VB, FX607VUR, FX607VBR, TUF607V, TUF607VU, TUF607VB, TUF607VUR, TUF667V, TUF667VU, TUF667VB, TUF667VUR; Brand: ASUS, with antenna AWAN, model no.: AYP6Y-200040 and INPAQ, model no.: WA-P-LELE-04-006. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.16 W/kg and 0.83 W/kg at 1g tissues, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/06/2019 Application Dated: 09/06/2019 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.986 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.642 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS S532F, K532F and V532F, with antenna INPAQ, part no. WA-P-LB-02-647, WA-P-LB-02-647-1, WA-P-LB-01-225, WA-P-LB-01-225-1, 04072-03320000, 04072-03320100. The highest reported Body and Simultaneous SAR values are 1.03W/kg and 1.33W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Z8Dx9c/0ci2m4a8NJDOfhQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 09/06/2019 Application Dated: 09/06/2019 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.986 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.642 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS S532F, K532F and V532F, with antenna INPAQ, part no. WA-P-LB-02-647, WA-P-LB-02-647-1, WA-P-LB-01-225, WA-P-LB-01-225-1, 04072-03320000, 04072-03320100. The highest reported Body and Simultaneous SAR values are 1.03W/kg and 1.33W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 12/22/2022 Application Dated: 12/22/2022 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.986 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.642 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC filing establishes portable category for ASUS platform with models: BR1102CG and BR1102CGA (those models are for laptop); as well as the models: BR1102FG and BR1102FGA (those models are capable of laptop and tablet modes), along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.46 W/kg and 0.51 W/kg, respectively. Antennas used - PIFA with part numbers of DC33002SO4S(LA9RF448-CS-H) and DC33002SO5S(LA9RF449-CS-H), provided by the vendor of LUXSHARE; and part numbers of DC33002SJ4S(WA-P-LE-02-133) and DC33002SJ5S(WA-P-LE-01-036), provided by the vendor of INPAQ. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application yXYMJqdvTR+KS0FiXvNU0A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 12/22/2022 Application Dated: 12/22/2022 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.986 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.642 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC filing establishes portable category for ASUS platform with models: BR1102CG and BR1102CGA (those models are for laptop); as well as the models: BR1102FG and BR1102FGA (those models are capable of laptop and tablet modes), along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.46 W/kg and 0.51 W/kg, respectively. Antennas used - PIFA with part numbers of DC33002SO4S(LA9RF448-CS-H) and DC33002SO5S(LA9RF449-CS-H), provided by the vendor of LUXSHARE; and part numbers of DC33002SJ4S(WA-P-LE-02-133) and DC33002SJ5S(WA-P-LE-01-036), provided by the vendor of INPAQ. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 03/15/2024 Application Dated: 03/07/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi 6 AX201 (BT/WiFi) |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.129 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.036 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.135 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.109 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.137 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.132 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.103 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.149 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.134 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.132 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.13 | ||
| CC MO | 15E | 5845.0 - 5885.0 | 0.325 | ||
| CC MO | 15E | 5835.0 - 5875.0 | 0.692 | ||
| CC MO | 15E | 5855.0 - 5855.0 | 0.361 | ||
| CC MO | 15E | 5815.0 - 5815.0 | 0.132 |
| Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: B3402FB, B3402FBA, B3402FV.; Brand: ASUS, with antenna INPAQ, model no.: HQ20604969000 and HQ20604968000, antenna ZTX, model no.: HQ20604974000 and HQ20604973000. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are <0.10 W/kg and 0.72 W/kg at 1g tissues, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application yWxe9ZRipJ9QB0FpQzmVtg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 03/15/2024 Application Dated: 03/07/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi 6 AX201 (BT/WiFi) |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.129 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.036 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.135 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.109 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.137 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.132 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.103 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.149 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.134 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.132 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.13 | ||
| CC MO | 15E | 5845.0 - 5885.0 | 0.325 | ||
| CC MO | 15E | 5835.0 - 5875.0 | 0.692 | ||
| CC MO | 15E | 5855.0 - 5855.0 | 0.361 | ||
| CC MO | 15E | 5815.0 - 5815.0 | 0.132 |
| Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: B3402FB, B3402FBA, B3402FV.; Brand: ASUS, with antenna INPAQ, model no.: HQ20604969000 and HQ20604968000, antenna ZTX, model no.: HQ20604974000 and HQ20604973000. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are <0.10 W/kg and 0.72 W/kg at 1g tissues, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 02/14/2022 Application Dated: 02/10/2022 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wi-Fi 6 AX201 (BT/WiFi) |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.986 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.642 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device on tablet mode and to request approval for portable category specific host tablet PC, model number: UX582Z, RX582Z, UX582ZM, UX582ZW; Brand: ASUS, with antenna LUXSHARE-ICT, model no. 14008-04210200 and LUXSHARE-ICT, model no. 14008-04210300. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.17 W/kg and 1.59 W/kg at 1g tissues, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application xvxSFJWkUCcLBV/zZZO4gQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 02/14/2022 Application Dated: 02/10/2022 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wi-Fi 6 AX201 (BT/WiFi) |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.986 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.642 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device on tablet mode and to request approval for portable category specific host tablet PC, model number: UX582Z, RX582Z, UX582ZM, UX582ZW; Brand: ASUS, with antenna LUXSHARE-ICT, model no. 14008-04210200 and LUXSHARE-ICT, model no. 14008-04210300. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.17 W/kg and 1.59 W/kg at 1g tissues, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 09/10/2019 Application Dated: 09/10/2019 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.986 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.642 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: S432F, K432F, and V432F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.96 W/kg and 1.06 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application XnBB0ukZfVJzDpfhHP8cPA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 09/10/2019 Application Dated: 09/10/2019 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.986 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.642 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: S432F, K432F, and V432F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.96 W/kg and 1.06 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 04/15/2025 Application Dated: 04/15/2025 |
| ASUSTeK COMPUTER INC. |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK COMPUTER INC. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel WIFI 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. C2PC: Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, All-in-one PC, model number: E1600WK.; Brand: ASUS, with antenna High-Tek, model no.: 0ACCN021036N and 0ACCN021035N, antenna SOUTHSTAR, model no.: N12-8030-R0A and N12- 8029-R0A. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are <0.10 W/kg and 0.76 W/kg at 1g tissues, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application xDORKYV49NlEW0B4QqNU7A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 08/28/2022 Application Dated: 08/26/2022 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.129 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.036 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.135 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.109 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.132 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.103 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.149 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.134 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.132 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.13 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host ASUS notebook PC, models B5602FB and B5602CB with the antenna South-Star, part no. DC33002QA00 (3.N201.0192), DC33002QA10(3.N201.0193) and antenna Pulse, part no. DC33002Q900(TZ2283D), DC33002Q910(TZ2283E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.17 W/kg and 1.48 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application xDORKYV49NlEW0B4QqNU7A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 08/28/2022 Application Dated: 08/26/2022 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.129 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.036 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.135 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.109 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.132 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.103 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.149 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.134 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.132 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.13 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host ASUS notebook PC, models B5602FB and B5602CB with the antenna South-Star, part no. DC33002QA00 (3.N201.0192), DC33002QA10(3.N201.0193) and antenna Pulse, part no. DC33002Q900(TZ2283D), DC33002Q910(TZ2283E). The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are 1.17 W/kg and 1.48 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 06/23/2022 Application Dated: 06/23/2022 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure in the portable configuration host of ASUS Portable Computer, model: B3402FB, B3402FBA, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10 W/kg and 0.53 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application v4HCFY7F/6ZWIzBCSrviJQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 06/23/2022 Application Dated: 06/23/2022 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to reduce the power and address RF Exposure in the portable configuration host of ASUS Portable Computer, model: B3402FB, B3402FBA, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10 W/kg and 0.53 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 09/10/2019 Application Dated: 09/10/2019 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: S432F, K432F, and V432F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are < 0.10 W/kg and 1.01 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application UjY5+I9l8RNK2nqQFQ465A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 09/10/2019 Application Dated: 09/10/2019 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: S432F, K432F, and V432F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are < 0.10 W/kg and 1.01 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 12/14/2022 Application Dated: 11/23/2022 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.129 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.036 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.135 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.109 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.132 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.103 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.149 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.134 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.132 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.13 | ||
| CC MO | 15E | 5845.0 - 5885.0 | 0.325 | ||
| CC MO | 15E | 5835.0 - 5875.0 | 0.692 | ||
| CC MO | 15E | 5855.0 - 5855.0 | 0.361 | ||
| CC MO | 15E | 5815.0 - 5815.0 | 0.132 |
| Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application uFcXta3JF4isFsM9Jj9XJg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 12/14/2022 Application Dated: 11/23/2022 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.129 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.036 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.135 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.109 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.132 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.103 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.149 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.134 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.132 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.13 | ||
| CC MO | 15E | 5845.0 - 5885.0 | 0.325 | ||
| CC MO | 15E | 5835.0 - 5875.0 | 0.692 | ||
| CC MO | 15E | 5855.0 - 5855.0 | 0.361 | ||
| CC MO | 15E | 5815.0 - 5815.0 | 0.132 |
| Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 07/11/2022 Application Dated: 07/08/2022 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.129 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.036 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.135 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.109 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.132 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.103 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.149 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.134 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.132 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.13 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC filing establishes portable category for ASUS platform with models: B5402CB and B5402CBA (for laptop), along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.20 W/kg and 1.33 W/kg, respectively. Antennas used - PIFA with part numbers of DC33002R600(0ACCN022001N) and DC33002R610(0ACCN022002N), provided by the vendor of High-tek; and part numbers of DC33002R500(TZ2381D) and DC33002R510(TZ2381E), provided by the vendor of PULSE. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application UDkiHBthxQuJYGU6AWrWgA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 07/11/2022 Application Dated: 07/08/2022 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6E) BW160+BT/BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.129 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.036 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.135 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.109 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.132 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.103 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.149 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.134 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.132 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.13 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC filing establishes portable category for ASUS platform with models: B5402CB and B5402CBA (for laptop), along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.20 W/kg and 1.33 W/kg, respectively. Antennas used - PIFA with part numbers of DC33002R600(0ACCN022001N) and DC33002R610(0ACCN022002N), provided by the vendor of High-tek; and part numbers of DC33002R500(TZ2381D) and DC33002R510(TZ2381E), provided by the vendor of PULSE. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 01/11/2024 Application Dated: 01/10/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wi-Fi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host of ASUS Notebook PC, model number: BR1204FG, BR1204CG, BR1104FG and BR1104CG with the antenna INPAQ, part no. WA-F-LE-01-009 (HQ26003000240), WA-F-LE-03-002 (HQ26003000230) and antenna INNOWAVE, part no. F001C8711590001, F001C8712190002. The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are <0.10 W/kg and 1.18 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ucBh9uOWIx4XaYe8i03CRg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 01/11/2024 Application Dated: 01/10/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wi-Fi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host of ASUS Notebook PC, model number: BR1204FG, BR1204CG, BR1104FG and BR1104CG with the antenna INPAQ, part no. WA-F-LE-01-009 (HQ26003000240), WA-F-LE-03-002 (HQ26003000230) and antenna INNOWAVE, part no. F001C8711590001, F001C8712190002. The detail information please refer to the filing. The highest reported Body and Simultaneous SAR values are <0.10 W/kg and 1.18 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 04/15/2025 Application Dated: 04/15/2025 |
| ASUSTeK COMPUTER INC. |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK COMPUTER INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel WIFI 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.986 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.642 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. C2PC: Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, All-in-one PC, model number: E1600WK.; Brand: ASUS, with antenna High-Tek, model no.: 0ACCN021036N and 0ACCN021035N, antenna SOUTHSTAR, model no.: N12-8030-R0A and N12-8029-R0A. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.56 W/kg and 0.76 W/kg at 1g tissues, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application TyajebbwCEofk23/J8XGmg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 04/19/2022 Application Dated: 04/14/2022 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wi-Fi 6 AX201 (BT/WiFi) |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: TP3402Z, J3402Z, R3402Z, TP3402ZA.; Brand: ASUS, with antenna INPAQ, model no.: WA-P-LE-03-003. And Innowave, model no.: F00168007510002. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.16 W/kg and 1.16 W/kg at 1g tissues, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application TyajebbwCEofk23/J8XGmg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 04/19/2022 Application Dated: 04/14/2022 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wi-Fi 6 AX201 (BT/WiFi) |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: TP3402Z, J3402Z, R3402Z, TP3402ZA.; Brand: ASUS, with antenna INPAQ, model no.: WA-P-LE-03-003. And Innowave, model no.: F00168007510002. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.16 W/kg and 1.16 W/kg at 1g tissues, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 12/27/2019 Application Dated: 12/27/2019 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.129 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.036 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.135 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.109 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.149 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.132 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.103 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.134 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.132 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.13 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: TP412F / J412F / R563F / SF4100F / P1452F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.83 W/kg and 1.51 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application tVS2de+rz1YZ7lxbY1VFTA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 12/27/2019 Application Dated: 12/27/2019 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.129 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.036 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.135 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.109 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.149 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.132 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.103 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.134 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.132 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.13 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Models: TP412F / J412F / R563F / SF4100F / P1452F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.83 W/kg and 1.51 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/27/2019 Application Dated: 09/27/2019 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.986 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.642 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS X531F, S531F, K531F, V531F and S5500F, with antenna High Tek, part no. 0ACNXL19015N, 0ACNXL19017N, 04072-03310100 and INPAQ, part no. WA-P-LB-02-645, WA-F-LB-02-178, 04072-03310000. The highest reported Body and Simultaneous SAR values are 1.04W/kg and 1.40W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application TLZJtnfasPNICRYKy0PATg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 09/27/2019 Application Dated: 09/27/2019 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.986 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.642 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS X531F, S531F, K531F, V531F and S5500F, with antenna High Tek, part no. 0ACNXL19015N, 0ACNXL19017N, 04072-03310100 and INPAQ, part no. WA-P-LB-02-645, WA-F-LB-02-178, 04072-03310000. The highest reported Body and Simultaneous SAR values are 1.04W/kg and 1.40W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/20/2020 Application Dated: 10/08/2020 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.986 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.642 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS TP470E, J470E, R460E and SF470E with antenna INPAQ, part no. WA-F-LB-02-224, WA-F-LB-01- 088, WA-F-LB-030153 and AWAN, part no. AYF6Y-100023, AYF6Y-100024, AYF6Y- 100126. The highest reported reported Body and Simultaneous SAR values are 1.03 W/kg and 1.32 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application TKvVhSGwYkya4BxvNmr95w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 10/20/2020 Application Dated: 10/08/2020 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.986 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.642 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS TP470E, J470E, R460E and SF470E with antenna INPAQ, part no. WA-F-LB-02-224, WA-F-LB-01- 088, WA-F-LB-030153 and AWAN, part no. AYF6Y-100023, AYF6Y-100024, AYF6Y- 100126. The highest reported reported Body and Simultaneous SAR values are 1.03 W/kg and 1.32 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/20/2020 Application Dated: 10/08/2020 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.129 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.036 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.135 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.109 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.132 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.103 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.149 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.134 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.132 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.13 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS TP470E, J470E, R460E and SF470E with antenna INPAQ, part no. WA-F-LB-02-224, WA-F-LB-01- 088, WA-F-LB-030153 and AWAN, part no. AYF6Y-100023, AYF6Y-100024, AYF6Y- 100126. The highest reported reported Body and Simultaneous SAR values are 0.90 W/kg and 1.19 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application TIUb8PEsJfmRUdNDPWf3ag==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 10/20/2020 Application Dated: 10/08/2020 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQAX201NG |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel WiFi 6 AX201 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.129 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.072 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.036 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.135 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.109 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.062 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.137 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.132 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.103 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.149 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.134 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.132 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.13 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for portable category specific host Notebook PC, model number ASUS TP470E, J470E, R460E and SF470E with antenna INPAQ, part no. WA-F-LB-02-224, WA-F-LB-01- 088, WA-F-LB-030153 and AWAN, part no. AYF6Y-100023, AYF6Y-100024, AYF6Y- 100126. The highest reported reported Body and Simultaneous SAR values are 0.90 W/kg and 1.19 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |