FCC ID MSQ-BRCM1058
Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card
by ASUSTeK Computer Inc
Grantee Code: MSQ Product Code: BRCM1058
Latest application date: 2012-12-25
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2012-12-25 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2012-12-25 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2012-12-25 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2012-11-12 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2012-11-12 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2012-11-12 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: QDS-BRCM1058 Grant Date: 06/29/2011 | 2012-10-29 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: QDS-BRCM1058 Grant Date: 06/30/2011 | 2012-10-29 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: QDS-BRCM1058 Grant Date: 06/30/2011 | 2012-10-29 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| (BCM943228HMB) UserMan-Part 1 | Users Manual | 2013-06-23 | PDF 2.2 MB |
| (BCM943228HMB) UserMan-Part 2 | Users Manual | 2013-06-23 | PDF 2.2 MB |
| (BCM943228HMB) UserMan-Part 1 | Users Manual | 2012-11-12 | PDF 1.1 MB |
| (BCM943228HMB) UserMan-Part 2 | Users Manual | 2012-11-12 | PDF 568.2 KB |
| (BCM943228HMB) UserMan_20121023 | Users Manual | 2012-10-29 | PDF 566.6 KB |
| (BCM943228HMB) Inpho | Internal Photos | 2013-06-23 | PDF 1,012.7 KB |
| (BCM943228HMB) Inpho_2012.11.12 | Internal Photos | 2012-11-12 | PDF 1.5 MB |
| (BCM943228HMB) Expho | External Photos | 2013-06-23 | PDF 249.8 KB |
| (BCM943228HMB) Expho | External Photos | 2012-11-12 | PDF 250 KB |
| (BCM943228HMB) Expho_Part 15B_2012.11.09 | External Photos | 2012-11-12 | PDF 1 MB |
| (BCM943228HMB) Expho_20121023 | External Photos | 2012-10-29 | PDF 217 KB |
| (BCM943228HMB) Label Sample | ID Label/Location Info | 2012-12-25 | PDF 213 KB |
| (BCM943228HMB) LableLoc | ID Label/Location Info | 2012-12-25 | PDF 177.9 KB |
| (BCM943228HMB) LabelLoc_20121023 | ID Label/Location Info | 2012-10-29 | PDF 113 KB |
| (BCM943228HMB) LabelSmpl_20121023 | ID Label/Location Info | 2012-10-29 | PDF 40.4 KB |
| (BCM943228HMB) Tsup | Test Setup Photos | 2013-06-23 | PDF 103.5 KB |
| (BCM943228HMB) Tsup | Test Setup Photos | 2012-11-12 | PDF 132 KB |
| (BCM943228HMB) Tsup_Part 15B_2012.11.09 | Test Setup Photos | 2012-11-12 | PDF 515.9 KB |
| (BCM943228HMB) TestRpt_Part 15B-2_2012.11.09 | Test Report | 2012-11-12 | PDF 622 KB |
| (BCM943228HMB) DTS-UNII Declaration letter | Attestation Statements | 2012-12-25 | PDF 246.7 KB |
| (BCM943228HMB) DoC Letter | Attestation Statements | 2012-12-25 | PDF 106.4 KB |
| (BCM943228HMB) Class II Change_2012.12.21 | Cover Letter(s) | 2012-12-25 | PDF 37.8 KB |
| (BCM943228HMB) Confidential_2012.12.19 | Cover Letter(s) | 2012-12-25 | PDF 81.4 KB |
| (BCM943228HMB) Declaration of authorization | Cover Letter(s) | 2012-12-25 | PDF 112 KB |
| (BCM943228HMB) Declaration of model different | Cover Letter(s) | 2012-12-25 | PDF 93.5 KB |
| (BCM943228HMB) Class II Change-fcc | Cover Letter(s) | 2012-11-12 | PDF 297.6 KB |
| (BCM943228HMB) Confidential | Cover Letter(s) | 2012-11-12 | PDF 413.1 KB |
| (BCM943228HMB) Cover Letter | Cover Letter(s) | 2012-11-12 | PDF 225.9 KB |
| (BCM943228HMB) DTS-UNII Declaration letter | Cover Letter(s) | 2012-11-12 | PDF 291 KB |
| (BCM943228HMB) Declaration of authorization | Cover Letter(s) | 2012-11-12 | PDF 199.5 KB |
| (BCM943228HMB) Declaration of model different | Cover Letter(s) | 2012-11-12 | PDF 174.4 KB |
| (BCM943228HMB) Authorization letter_20121025 | Cover Letter(s) | 2012-10-29 | PDF 30.9 KB |
| (BCM943228HMB) RF_160_02 Declaration of authorization | Cover Letter(s) | 2012-10-29 | PDF 151.3 KB |
| (BCM943228HMB) TestRpt-SAR_Part1_2012.12.21 | RF Exposure Info | 2012-12-25 | PDF 1.4 MB |
| (BCM943228HMB) TestRpt-SAR_Part2_2012.12.21 | RF Exposure Info | 2012-12-25 | PDF 4.2 MB |
| (BCM943228HMB) TestRpt-SAR_2012.11.12 | RF Exposure Info | 2012-11-12 | PDF 4.5 MB |
Application Information
| Application ID | zHkksY9a6biecc/ThJP/xw== |
|---|---|
| Final Action Date | 2012-12-25 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0005821988 |
| Model | -BRCM1058 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Responsible Party | Jackson Yen, Associate Vice President, jackson_yen@asus.com  , +886-2-28943447 |
| Technical Contact | Sabina Chen, QuieTek Corporation, sabinachen@quietek.com  , 886-2-8601-3788 |
| Test Firm | Sky Hsu, Quie Tek Corporation, skyhsu@quietek.com , 886-2-86013788 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 06/23/2013 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Permissive Change: Additional Chassis added, model number: U38D, U38N with the following antenna INPAQ WA-M-LB-04-001 / WA-M-LB-04-004, ACON APE6P-700002/ APE6P-700003. The highest reported SAR value is: 1.48 W/kg. Class II Permissive Change by decreasing the power through software, as documented in this filing, to achieve the better SAR value; and the only evaluated Antennas were APE6P-700002 and APE6P-700003 manufactured by ACON. The highest reported SAR value is 1.13 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| zHkksY9a6biecc/ThJP/xw== | 2012-12-25 | Class II permissive change or modification of presently authorized equipment |
| uqc+a1Iy4yxBpd10b8kG5w== | 2012-12-25 | Class II permissive change or modification of presently authorized equipment |
| 1P812jDEk723UkmDDzfi+w== | 2012-12-25 | Class II permissive change or modification of presently authorized equipment |
| +tymjdAGyOGyKryFUyRz8w== | 2012-12-25 | Class II permissive change or modification of presently authorized equipment |
| yVZ6tpyQHgBV+ktUfG4Zpg== | 2012-11-12 | Class II permissive change or modification of presently authorized equipment |
| cagZkMQr2MHUV2FYH+j88A== | 2012-11-12 | Class II permissive change or modification of presently authorized equipment |
| c7rncOZWWOCrd7qFGS+yPg== | 2012-11-12 | Class II permissive change or modification of presently authorized equipment |
| YUoKPmijpE9FIl9Xjlm97A== | 2012-11-12 | Class II permissive change or modification of presently authorized equipment |
| qCmcJ/BZyqOUlrwtwz9ZtQ== | 2012-10-29 | Change in identification of presently authorized equipment. Original FCC ID: QDS-BRCM1058 Grant Date: 06/29/2011 |
| pmQVj38/PkI2SeBfh3hClg== | 2012-10-29 | Change in identification of presently authorized equipment. Original FCC ID: QDS-BRCM1058 Grant Date: 06/30/2011 |
| Cn18mRalBWXbtPztiC9jOQ== | 2012-10-29 | Change in identification of presently authorized equipment. Original FCC ID: QDS-BRCM1058 Grant Date: 06/30/2011 |
| /Q7cfGuA+2MBFVP0qh/Epg== | 2012-10-29 | Change in identification of presently authorized equipment. Original FCC ID: QDS-BRCM1058 Grant Date: 06/30/2011 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 15B | CC | ||
| 2402-2480 MHz | 0.0030000 | 15C | CC |
| 2402-2480 MHz | 0.003 | 15C | CC |
| 2412-2462 MHz | 0.575 | 15C | CC |
| 2412-2462 MHz | 0.774 | 15C | CC, MO |
| 2422-2452 MHz | 0.299 | 15C | CC, MO |
| 5180-5240 MHz | 0.025 | 15E | CC |
| 5180-5240 MHz | 0.017 | 15E | CC, MO |
| 5190-5230 MHz | 0.019 | 15E | CC, MO |
| 5260-5320 MHz | 0.055 | 15E | CC |
| 5260-5320 MHz | 0.087 | 15E | CC, MO |
| 5270-5310 MHz | 0.101 | 15E | CC, MO |
| 5500-5700 MHz | 0.055 | 15E | CC |
| 5500-5700 MHz | 0.094 | 15E | CC, MO |
| 5510-5670 MHz | 0.116 | 15E | CC, MO |
| 5745-5825 MHz | 0.39 | 15C | CC |
| 5745-5825 MHz | 0.647 | 15C | CC, MO |
| 5755-5795 MHz | 0.711 | 15C | CC, MO |
Grants
TCB Grant - Application zHkksY9a6biecc/ThJP/xw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/25/2012 Application Dated: 12/19/2012 |
| ASUSTeK Computer Inc |
| 4F, No. 150, Li-Te Rd. |
| Peitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.025 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.017 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.019 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.055 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.087 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.101 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.055 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.094 | ||
| CC MO | 15E | 5510.0 - 5670.0 | 0.116 |
| Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Permissive Change: Additional Chassis added, model number: U38D, U38N with the following antenna INPAQ WA-M-LB-04-001 / WA-M-LB-04-004, ACON APE6P-700002/ APE6P-700003. The highest reported SAR value is: 1.48 W/kg. Class II Permissive Change by decreasing the power through software, as documented in this filing, to achieve the better SAR value; and the only evaluated Antennas were APE6P-700002 and APE6P-700003 manufactured by ACON. The highest reported SAR value is 1.13 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application zHkksY9a6biecc/ThJP/xw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 4F, No. 150, Li-Te Rd. Peitou, Taipei, 112 Taiwan |
Date of Grant: 12/25/2012 Application Dated: 12/19/2012 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.025 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.017 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.019 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.055 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.087 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.101 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.055 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.094 | ||
| CC MO | 15E | 5510.0 - 5670.0 | 0.116 |
| Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Permissive Change: Additional Chassis added, model number: U38D, U38N with the following antenna INPAQ WA-M-LB-04-001 / WA-M-LB-04-004, ACON APE6P-700002/ APE6P-700003. The highest reported SAR value is: 1.48 W/kg. Class II Permissive Change by decreasing the power through software, as documented in this filing, to achieve the better SAR value; and the only evaluated Antennas were APE6P-700002 and APE6P-700003 manufactured by ACON. The highest reported SAR value is 1.13 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/12/2012 Application Dated: 11/08/2012 |
| ASUSTeK Computer Inc |
| 4F, No. 150, Li-Te Rd. |
| Peitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| Class II Permissive Change: Additional Chassis added, model number: U38D, U38N with the following antenna INPAQ WA-M-LB-04-001 / WA-M-LB-04-004, ACON APE6P-700002 / APE6P-700003. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application yVZ6tpyQHgBV+ktUfG4Zpg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 4F, No. 150, Li-Te Rd. Peitou, Taipei, 112 Taiwan |
Date of Grant: 11/12/2012 Application Dated: 11/08/2012 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| Class II Permissive Change: Additional Chassis added, model number: U38D, U38N with the following antenna INPAQ WA-M-LB-04-001 / WA-M-LB-04-004, ACON APE6P-700002 / APE6P-700003. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/12/2012 Application Dated: 11/08/2012 |
| ASUSTeK Computer Inc |
| 4F, No. 150, Li-Te Rd. |
| Peitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.025 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.017 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.019 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.055 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.087 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.101 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.055 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.094 | ||
| CC MO | 15E | 5510.0 - 5670.0 | 0.116 |
| Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Permissive Change: Additional Chassis added, model number: U38D, U38N with the following antenna INPAQ WA-M-LB-04-001 / WA-M-LB-04-004, ACON APE6P-700002 / APE6P-700003. The highest reported SAR value is: 1.48 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application YUoKPmijpE9FIl9Xjlm97A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 4F, No. 150, Li-Te Rd. Peitou, Taipei, 112 Taiwan |
Date of Grant: 11/12/2012 Application Dated: 11/08/2012 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.025 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.017 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.019 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.055 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.087 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.101 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.055 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.094 | ||
| CC MO | 15E | 5510.0 - 5670.0 | 0.116 |
| Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Permissive Change: Additional Chassis added, model number: U38D, U38N with the following antenna INPAQ WA-M-LB-04-001 / WA-M-LB-04-004, ACON APE6P-700002 / APE6P-700003. The highest reported SAR value is: 1.48 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/25/2012 Application Dated: 12/20/2012 |
| ASUSTeK Computer Inc |
| 4F, No. 150, Li-Te Rd. |
| Peitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Class II Permissive Change: Additional Chassis added, model number: U38D, U38N with the following antenna INPAQ WA-M-LB-04-001 / WA-M-LB-04-004, ACON APE6P-700002 / APE6P-700003. Class II Permissive Change by decreasing the power through software, as documented in this filing, to achieve the better SAR value; and the only evaluated Antennas were APE6P-700002 and APE6P-700003 manufactured by ACON. |
EAS Grant - Application uqc+a1Iy4yxBpd10b8kG5w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 4F, No. 150, Li-Te Rd. Peitou, Taipei, 112 Taiwan |
Date of Grant: 12/25/2012 Application Dated: 12/20/2012 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Class II Permissive Change: Additional Chassis added, model number: U38D, U38N with the following antenna INPAQ WA-M-LB-04-001 / WA-M-LB-04-004, ACON APE6P-700002 / APE6P-700003. Class II Permissive Change by decreasing the power through software, as documented in this filing, to achieve the better SAR value; and the only evaluated Antennas were APE6P-700002 and APE6P-700003 manufactured by ACON. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/29/2012 Application Dated: 10/26/2012 |
| ASUSTeK Computer Inc |
| 4F, No. 150, Li-Te Rd. |
| Peitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.575 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.774 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.299 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.39 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.647 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.711 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application qCmcJ/BZyqOUlrwtwz9ZtQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 4F, No. 150, Li-Te Rd. Peitou, Taipei, 112 Taiwan |
Date of Grant: 10/29/2012 Application Dated: 10/26/2012 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.575 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.774 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.299 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.39 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.647 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.711 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/29/2012 Application Dated: 10/26/2012 |
| ASUSTeK Computer Inc |
| 4F, No. 150, Li-Te Rd. |
| Peitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Output power listed is conducted. This module may only be installed by the OEM or and OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filling. OEM integrators and end users must be provided with specific operation instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application pmQVj38/PkI2SeBfh3hClg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 4F, No. 150, Li-Te Rd. Peitou, Taipei, 112 Taiwan |
Date of Grant: 10/29/2012 Application Dated: 10/26/2012 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Output power listed is conducted. This module may only be installed by the OEM or and OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filling. OEM integrators and end users must be provided with specific operation instructions for satisfying RF exposure compliance requirements. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/29/2012 Application Dated: 10/26/2012 |
| ASUSTeK Computer Inc |
| 4F, No. 150, Li-Te Rd. |
| Peitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.025 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.017 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.019 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.055 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.087 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.101 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.055 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.094 | ||
| CC MO | 15E | 5510.0 - 5670.0 | 0.116 |
| Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Cn18mRalBWXbtPztiC9jOQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 4F, No. 150, Li-Te Rd. Peitou, Taipei, 112 Taiwan |
Date of Grant: 10/29/2012 Application Dated: 10/26/2012 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.025 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.017 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.019 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.055 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.087 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.101 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.055 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.094 | ||
| CC MO | 15E | 5510.0 - 5670.0 | 0.116 |
| Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/12/2012 Application Dated: 11/08/2012 |
| ASUSTeK Computer Inc |
| 4F, No. 150, Li-Te Rd. |
| Peitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Output power listed is conducted. This module may only be installed by the OEM or and OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filling. OEM integrators and end users must be provided with specific operation instructions for satisfying RF exposure compliance requirements. Class II Permissive Change: Additional Chassis added, model number: U38D, U38N with the following antenna INPAQ WA-M-LB-04-001 / WA-M-LB-04-004, ACON APE6P-700002 / APE6P-700003. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application cagZkMQr2MHUV2FYH+j88A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 4F, No. 150, Li-Te Rd. Peitou, Taipei, 112 Taiwan |
Date of Grant: 11/12/2012 Application Dated: 11/08/2012 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Output power listed is conducted. This module may only be installed by the OEM or and OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filling. OEM integrators and end users must be provided with specific operation instructions for satisfying RF exposure compliance requirements. Class II Permissive Change: Additional Chassis added, model number: U38D, U38N with the following antenna INPAQ WA-M-LB-04-001 / WA-M-LB-04-004, ACON APE6P-700002 / APE6P-700003. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/12/2012 Application Dated: 11/08/2012 |
| ASUSTeK Computer Inc |
| 4F, No. 150, Li-Te Rd. |
| Peitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.575 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.774 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.299 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.39 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.647 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.711 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Permissive Change: Additional Chassis added, model number: U38D, U38N with the following antenna INPAQ WA-M-LB-04-001 / WA-M-LB-04-004, ACON APE6P-700002 / APE6P-700003. The highest reported SAR value is: 1.48 W/kg.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application c7rncOZWWOCrd7qFGS+yPg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 4F, No. 150, Li-Te Rd. Peitou, Taipei, 112 Taiwan |
Date of Grant: 11/12/2012 Application Dated: 11/08/2012 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.575 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.774 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.299 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.39 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.647 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.711 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Permissive Change: Additional Chassis added, model number: U38D, U38N with the following antenna INPAQ WA-M-LB-04-001 / WA-M-LB-04-004, ACON APE6P-700002 / APE6P-700003. The highest reported SAR value is: 1.48 W/kg.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/25/2012 Application Dated: 12/19/2012 |
| ASUSTeK Computer Inc |
| 4F, No. 150, Li-Te Rd. |
| Peitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.575 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.774 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.299 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.39 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.647 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.711 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Permissive Change: Additional Chassis added, model number: U38D, U38N with the following antenna INPAQ WA-M-LB-04-001 / WA-M-LB-04-004, ACON APE6P-700002 / APE6P-700003. The highest reported SAR value is: 1.48 W/kg. Class II Permissive Change by decreasing the power through software, as documented in this filing, to achieve the better SAR value; and the only evaluated Antennas were APE6P-700002 and APE6P-700003 manufactured by ACON. The highest reported SAR value is 1.13 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 1P812jDEk723UkmDDzfi+w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 4F, No. 150, Li-Te Rd. Peitou, Taipei, 112 Taiwan |
Date of Grant: 12/25/2012 Application Dated: 12/19/2012 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.575 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.774 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.299 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.39 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.647 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.711 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Permissive Change: Additional Chassis added, model number: U38D, U38N with the following antenna INPAQ WA-M-LB-04-001 / WA-M-LB-04-004, ACON APE6P-700002 / APE6P-700003. The highest reported SAR value is: 1.48 W/kg. Class II Permissive Change by decreasing the power through software, as documented in this filing, to achieve the better SAR value; and the only evaluated Antennas were APE6P-700002 and APE6P-700003 manufactured by ACON. The highest reported SAR value is 1.13 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/29/2012 Application Dated: 10/29/2012 |
| ASUSTeK Computer Inc |
| 4F, No. 150, Li-Te Rd. |
| Peitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application /Q7cfGuA+2MBFVP0qh/Epg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 4F, No. 150, Li-Te Rd. Peitou, Taipei, 112 Taiwan |
Date of Grant: 10/29/2012 Application Dated: 10/29/2012 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/25/2012 Application Dated: 12/19/2012 |
| ASUSTeK Computer Inc |
| 4F, No. 150, Li-Te Rd. |
| Peitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Output power listed is conducted. This module may only be installed by the OEM or and OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filling. OEM integrators and end users must be provided with specific operation instructions forsatisfying RF exposure compliance requirements. Class II Permissive Change: Additional Chassis added, model number: U38D, U38N with the following antenna INPAQ WA-M-LB-04-001 / WA-M-LB-04-004, ACON APE6P-700002 / APE6P-700003. Class II Permissive Change by decreasing the power through software, as documented in this filing, to achieve the better SAR value; and the only evaluated Antennas were APE6P-700002 and APE6P-700003 manufactured by ACON. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application +tymjdAGyOGyKryFUyRz8w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 4F, No. 150, Li-Te Rd. Peitou, Taipei, 112 Taiwan |
Date of Grant: 12/25/2012 Application Dated: 12/19/2012 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-BRCM1058 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Broadcom 802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Output power listed is conducted. This module may only be installed by the OEM or and OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filling. OEM integrators and end users must be provided with specific operation instructions forsatisfying RF exposure compliance requirements. Class II Permissive Change: Additional Chassis added, model number: U38D, U38N with the following antenna INPAQ WA-M-LB-04-001 / WA-M-LB-04-004, ACON APE6P-700002 / APE6P-700003. Class II Permissive Change by decreasing the power through software, as documented in this filing, to achieve the better SAR value; and the only evaluated Antennas were APE6P-700002 and APE6P-700003 manufactured by ACON. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |