FCC ID MSQDPC2434
WIRELESS CABLE MODEM
by ASUSTeK Computer Inc
Grantee Code: MSQ Product Code: DPC2434
Latest application date: 2008-03-13
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2008-03-13 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2007-06-07 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2006-10-26 |
| 2412-2462 MHz | Original Equipment | 2006-10-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| USERS MANUAL | Users Manual | 2006-11-27 | PDF 3 MB |
| INTERNAL PHOTOS | Internal Photos | 2006-11-27 | PDF 2 MB |
| INTERNAL PHOTOS | Internal Photos | 2006-10-26 | PDF 178.5 KB |
| EXTERNAL PHOTOS | External Photos | 2008-03-13 | PDF 249.6 KB |
| Photos of adapter | External Photos | 2007-06-07 | PDF 239.5 KB |
| EXTERNAL PHOTOS | External Photos | 2006-11-27 | PDF 490.9 KB |
| LABEL LOCATION | Test Report | 2006-10-26 | PDF 143.1 KB |
| LABEL SAMPLE | ID Label/Location Info | 2006-10-26 | PDF 78.2 KB |
| LABEL LOCATION | ID Label/Location Info | 2006-10-13 | PDF 144.2 KB |
| LABEL SAMPLE | ID Label/Location Info | 2006-10-13 | PDF 74.8 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2008-03-13 | PDF 456.1 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2006-11-27 | PDF 324.8 KB |
| TEST REPORT | Test Report | 2008-03-13 | PDF 500.4 KB |
| Test report | Test Report | 2007-06-07 | PDF 417.7 KB |
| TEST REPORT | Test Report | 2006-10-26 | PDF 980.4 KB |
| TEST REPORT | Test Report | 2006-10-13 | PDF 1 MB |
| ATTESTATION STATEMENT | Attestation Statements | 2008-03-13 | PDF 101 KB |
| COVER LETTER | Cover Letter(s) | 2008-03-13 | PDF 109.2 KB |
| MODUALAR APPROVAL LETTER | Cover Letter(s) | 2008-03-13 | PDF 106.1 KB |
| Cover Letter | Cover Letter(s) | 2007-06-07 | PDF 104.3 KB |
| CLASS II CHANGE LETTER | Cover Letter(s) | 2006-10-26 | PDF 104.1 KB |
| COVER LETTER | Cover Letter(s) | 2006-10-13 | PDF 433.8 KB |
| RF EXPOSURE | RF Exposure Info | 2006-10-13 | PDF 1.2 MB |
| BLOCK DIAGRAM Metadata only | Block Diagram | PDF 426.5 KB | |
| SCHEMATICS Metadata only | Schematics | PDF 511.2 KB | |
| OPERATIONAL DESCRIPTION Metadata only | Operational Description | PDF 83.1 KB | |
| PARTS LIST Metadata only | Parts List/Tune Up Info | PDF 153.4 KB |
Application Information
| Application ID | Cz8wmMuNpdboSQAqIfcZyQ== |
|---|---|
| Final Action Date | 2008-03-13 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0005821988 |
| Model | DPC2434 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WIRELESS CABLE MODEM |
| Responsible Party | Jackson Yen, Associate Vice President, jackson_yen@asus.com  , +886-2-28943447 |
| Test Firm | Jack Tsai, Training Research Co., Ltd., jack@trclab.com.tw  , 886-2-26935155 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Listed Is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: This Class II Change adds an additional power adapter. Class II Change: This Class II Change adds 2 alternate power adapters. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Cz8wmMuNpdboSQAqIfcZyQ== | 2008-03-13 | Class II permissive change or modification of presently authorized equipment |
| 1uqK5/anQfEAUGBGtSxZIg== | 2007-06-07 | Class II permissive change or modification of presently authorized equipment |
| gH9TllAP021CiuoFiELtkA== | 2006-10-26 | Class II permissive change or modification of presently authorized equipment |
| 3b8k1n2L7O9dDR8TTgIXRg== | 2006-10-13 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.2020000 | 15C |
Grants
TCB Grant - Application gH9TllAP021CiuoFiELtkA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/26/2006 Application Dated: 10/26/2006 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQDPC2434 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WIRELESS CABLE MODEM |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.202 |
| Power Listed Is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: This Class II Change adds an additional power adapter. |
EAS Grant - Application gH9TllAP021CiuoFiELtkA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 10/26/2006 Application Dated: 10/26/2006 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQDPC2434 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WIRELESS CABLE MODEM |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.202 |
| Power Listed Is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: This Class II Change adds an additional power adapter. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 03/13/2008 Application Dated: 03/13/2008 |
| ASUSTeK Computer Inc |
| 4F, No. 150, Li-Te Rd. |
| Peitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQDPC2434 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WIRELESS CABLE MODEM |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.202 |
| Power Listed Is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: This Class II Change adds an additional power adapter. Class II Change: This Class II Change adds 2 alternate power adapters. |
EAS Grant - Application Cz8wmMuNpdboSQAqIfcZyQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 4F, No. 150, Li-Te Rd. Peitou, Taipei, 112 Taiwan |
Date of Grant: 03/13/2008 Application Dated: 03/13/2008 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQDPC2434 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WIRELESS CABLE MODEM |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.202 |
| Power Listed Is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: This Class II Change adds an additional power adapter. Class II Change: This Class II Change adds 2 alternate power adapters. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/13/2006 Application Dated: 10/12/2006 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQDPC2434 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WIRELESS CABLE MODEM |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.202 |
| Power Listed Is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 3b8k1n2L7O9dDR8TTgIXRg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 10/13/2006 Application Dated: 10/12/2006 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQDPC2434 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WIRELESS CABLE MODEM |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.202 |
| Power Listed Is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 | Date of Grant: 06/07/2007 Application Dated: 06/07/2007 |
| ASUSTeK Computer Inc |
| 4F, No. 150, Li-Te Rd. |
| Peitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQDPC2434 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Cable Modem |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.202 |
| Power Listed Is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: This Class II Change adds an additional power adapter. Class II Change: This Class II Change adds 2 alternate power adapters. |
EAS Grant - Application 1uqK5/anQfEAUGBGtSxZIg==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| ASUSTeK Computer Inc 4F, No. 150, Li-Te Rd. Peitou, Taipei, 112 Taiwan | Date of Grant: 06/07/2007 Application Dated: 06/07/2007 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQDPC2434 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Cable Modem |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.202 |
| Power Listed Is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: This Class II Change adds an additional power adapter. Class II Change: This Class II Change adds 2 alternate power adapters.
|
| Mail To: |
| EA840938 |