1. FCC ID
  2. MSQ
  3. MSQDPR2325

FCC ID MSQDPR2325

WIRELESS CABLE MODEM

by ASUSTeK Computer Inc

Grantee Code: MSQ   Product Code: DPR2325
Latest application date: 2009-12-29

FCC ID Device Details

FCC IDMSQDPR2325
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeMSQ
Product CodeDPR2325
Applicant BusinessASUSTeK Computer Inc 🇹🇼
Related Domains asus.com
Equipment ClassWIRELESS CABLE MODEM
Test FirmTraining Research Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2009-12-29
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2008-05-09
2412-2462 MHzOriginal Equipment2006-10-26

Exhibits

DocumentTypeAvailableFile
users manualUsers Manual2006-12-10PDF 2 MB
internal photosInternal Photos2006-12-10PDF 1.7 MB
EXTERNAL PHOTOSExternal Photos2009-12-29PDF 161.3 KB
EXTERNAL PHOTOSExternal Photos2008-05-09PDF 346 KB
external photosExternal Photos2006-12-10PDF 297.4 KB
label locationID Label/Location Info2006-10-26PDF 125 KB
label sampleID Label/Location Info2006-10-26PDF 74.9 KB
TEST SETUP PHOTOSTest Setup Photos2009-12-29PDF 360.4 KB
TEST SETUP PHOTOSTest Setup Photos2008-05-09PDF 565.2 KB
test setup photosTest Setup Photos2006-12-10PDF 365.5 KB
TEST REPORTTest Report2009-12-29PDF 407.3 KB
TEST REPORTTest Report2008-05-09PDF 419.3 KB
test reportTest Report2006-10-26PDF 957.9 KB
ATTESTATION LETTERAttestation Statements2009-12-29PDF 107.5 KB
ATTESTATION LETTERAttestation Statements2008-05-09PDF 101.5 KB
AUTHORIZATION LETTERCover Letter(s)2009-12-29PDF 111.6 KB
COVER LETTERCover Letter(s)2009-12-29PDF 116.4 KB
COVER LETTERCover Letter(s)2008-05-09PDF 109.5 KB
cover letterCover Letter(s)2006-10-26PDF 626.2 KB
rf exposureRF Exposure Info2006-10-26PDF 2.4 MB
block diagram Metadata onlyBlock DiagramPDF 224.4 KB
schematics Metadata onlySchematicsPDF 218.5 KB
operational description Metadata onlyOperational DescriptionPDF 83.1 KB
parts list Metadata onlyParts List/Tune Up InfoPDF 56.2 KB

Application Information

Application ID2XH6ID85iZYKFQGMyh53bg==
Final Action Date2009-12-29
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0005821988
ModelDPR2325
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWIRELESS CABLE MODEM
Responsible PartyJackson Yen, Associate Vice President, jackson_yen@asus.com , +886-2-28943447
Test FirmJack Tsai, Training Research Co., Ltd., jack@trclab.com.tw , 886-2-26935155
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPowerListed Is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: Additional power adapters.

Applications

Application IDDatePurpose
2XH6ID85iZYKFQGMyh53bg==2009-12-29Class II permissive change or modification of presently authorized equipment
1W/tVUe9VQjnmCC5IJ9/2g==2008-05-09Class II permissive change or modification of presently authorized equipment
ps5MyFLnVpnENm9b/PDhSw==2006-10-26Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.230000015C

Grants

TCB Grant - Application ps5MyFLnVpnENm9b/PDhSw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 10/26/2006

Application Dated: 10/26/2006
ASUSTeK Computer Inc
1F, No. 15, Lide Rd.
Beitou, Taipei, 112
Taiwan
 
Attention: Jackson Yen , Associate Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MSQDPR2325
Name of Grantee:  ASUSTeK Computer Inc
Equipment Class: Digital Transmission System
Notes: WIRELESS CABLE MODEM
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.23  

PowerListed Is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application ps5MyFLnVpnENm9b/PDhSw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ASUSTeK Computer Inc
1F, No. 15, Lide Rd.
Beitou, Taipei, 112
Taiwan 		  Date of Grant: 10/26/2006

Application Dated: 10/26/2006
 
Attention: Jackson Yen , Associate Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MSQDPR2325
Name of Grantee:  ASUSTeK Computer Inc
Equipment Class: Digital Transmission System
Notes: WIRELESS CABLE MODEM
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.23  

PowerListed Is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application 2XH6ID85iZYKFQGMyh53bg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
 Date of Grant: 12/29/2009

Application Dated: 12/29/2009
ASUSTeK Computer Inc
4F, No. 150, Li-Te Rd.
Peitou, Taipei, 112
Taiwan
 
Attention: Jackson Yen , Associate Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MSQDPR2325
Name of Grantee:  ASUSTeK Computer Inc
Equipment Class: Digital Transmission System
Notes: WIRELESS CABLE MODEM
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.23  

PowerListed Is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Change: Additional power adapters.


EAS Grant - Application 2XH6ID85iZYKFQGMyh53bg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ASUSTeK Computer Inc
4F, No. 150, Li-Te Rd.
Peitou, Taipei, 112
Taiwan 		  Date of Grant: 12/29/2009

Application Dated: 12/29/2009
 
Attention: Jackson Yen , Associate Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MSQDPR2325
Name of Grantee:  ASUSTeK Computer Inc
Equipment Class: Digital Transmission System
Notes: WIRELESS CABLE MODEM
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.23  

PowerListed Is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Change: Additional power adapters.



TCB Grant - Application 1W/tVUe9VQjnmCC5IJ9/2g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
 Date of Grant: 05/09/2008

Application Dated: 05/09/2008
ASUSTeK Computer Inc
4F, No. 150, Li-Te Rd.
Peitou, Taipei, 112
Taiwan
 
Attention: Jackson Yen , Associate Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MSQDPR2325
Name of Grantee:  ASUSTeK Computer Inc
Equipment Class: Digital Transmission System
Notes: WIRELESS CABLE MODEM
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.23  

PowerListed Is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Change: Additional power adapters.


EAS Grant - Application 1W/tVUe9VQjnmCC5IJ9/2g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ASUSTeK Computer Inc
4F, No. 150, Li-Te Rd.
Peitou, Taipei, 112
Taiwan 		  Date of Grant: 05/09/2008

Application Dated: 05/09/2008
 
Attention: Jackson Yen , Associate Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MSQDPR2325
Name of Grantee:  ASUSTeK Computer Inc
Equipment Class: Digital Transmission System
Notes: WIRELESS CABLE MODEM
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.23  

PowerListed Is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Change: Additional power adapters.



Mail To: