FCC ID MXF-A910603
Hot Spot Acess Point
by Gemtek Technology Co., Ltd.
Grantee Code: MXF Product Code: A910603
Latest application date: 2003-05-07
FCC ID Device Details
| FCC ID | MXF-A910603 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | MXF |
| Product Code | A910603 |
| Applicant Business | Gemtek Technology Co., Ltd. 🇹🇼 |
| Related Domains |  gemteks.com |
| Equipment Class | Hot Spot Acess Point |
| Test Firm | Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2003-05-07 |
| 2412-2462 MHz | Original Equipment | 2002-10-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2003-05-07 | PDF 1.1 MB |
| Manual | Users Manual | 2002-10-09 | PDF 1.2 MB |
| Int Photo | Internal Photos | 2003-05-07 | PDF 1.6 MB |
| Internal 1 | Internal Photos | 2002-10-09 | PDF 1.8 MB |
| Internal 2 | Internal Photos | 2002-10-09 | PDF 2 MB |
| Ext Photo | External Photos | 2003-05-07 | PDF 1.1 MB |
| External Photos | External Photos | 2002-10-09 | PDF 1.2 MB |
| Label and Location | ID Label/Location Info | 2003-05-07 | PDF 191.1 KB |
| Label and Location | ID Label/Location Info | 2002-10-09 | PDF 126.4 KB |
| Operational Description | Operational Description | 2002-10-09 | PDF 52.1 KB |
| Test Setup Photos | Test Setup Photos | 2003-05-07 | PDF 278 KB |
| Test Setup Photos | Test Setup Photos | 2002-10-09 | PDF 255.7 KB |
| Test Report | Test Report | 2003-05-07 | PDF 1.9 MB |
| Test Report | Test Report | 2002-10-09 | PDF 1.7 MB |
| Copy of Old Grant | Cover Letter(s) | 2003-05-07 | PDF 66.8 KB |
| Purpose of Application | Cover Letter(s) | 2003-05-07 | PDF 51.1 KB |
| Confid Request | Cover Letter(s) | 2002-10-09 | PDF 28.3 KB |
| DofC | Cover Letter(s) | 2002-10-09 | PDF 31.5 KB |
| POA | Cover Letter(s) | 2002-10-09 | PDF 25.4 KB |
| Revised RF Exposure | RF Exposure Info | 2003-05-07 | PDF 99.7 KB |
| RF Exposure | RF Exposure Info | 2002-10-09 | PDF 110.8 KB |
| Block Metadata only | Block Diagram | PDF 19.5 KB | |
| Block Metadata only | Block Diagram | PDF 17.8 KB | |
| Schema Metadata only | Schematics | PDF 116.3 KB | |
| Schema Metadata only | Schematics | PDF 115.9 KB |
Application Information
| Application ID | kTdbIswfrJHey8D+wNuelA== |
|---|---|
| Final Action Date | 2003-05-07 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0005801899 |
| Model | A910603 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Hot Spot Acess Point |
| Responsible Party | Adam Wang, Manager, Adam@gemteks.com , 886 3-598-5535 |
| Technical Contact | Ellis Wu, Advance Data Technology Corporation, ellis@adt.com.tw  , +886 3 327 0910 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com  , 886-2-605-2180-3 |
| TCB Email | hotline@americanTCB.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| kTdbIswfrJHey8D+wNuelA== | 2003-05-07 | Class II permissive change or modification of presently authorized equipment |
| gAqck6WusstpN2XuTvzkSg== | 2002-10-09 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application kTdbIswfrJHey8D+wNuelA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/07/2003 Application Dated: 05/07/2003 |
| Gemtek Technology Co., Ltd. |
| No.15-1 Zhonghua Road |
| Hsinchu Industrial Park |
| Hukou Hsinchu, 303 Taiwan |
| Attention: Adam Wang , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MXF-A910603 |
| Name of Grantee: | Gemtek Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Hot Spot Acess Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.027 |
| Power Output listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application kTdbIswfrJHey8D+wNuelA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Gemtek Technology Co., Ltd. No.15-1 Zhonghua Road Hsinchu Industrial Park Hukou Hsinchu, 303 Taiwan |
Date of Grant: 05/07/2003 Application Dated: 05/07/2003 |
| Attention: Adam Wang , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MXF-A910603 |
| Name of Grantee: | Gemtek Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Hot Spot Acess Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.027 |
| Power Output listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/09/2002 Application Dated: 10/09/2002 |
| Gemtek Technology Co., Ltd. |
| No.15-1 Zhonghua Road |
| Hsinchu Industrial Park |
| Hukou Hsinchu, 303 Taiwan |
| Attention: Adam Wang , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MXF-A910603 |
| Name of Grantee: | Gemtek Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN Acess Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.027 |
| Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application gAqck6WusstpN2XuTvzkSg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Gemtek Technology Co., Ltd. No.15-1 Zhonghua Road Hsinchu Industrial Park Hukou Hsinchu, 303 Taiwan |
Date of Grant: 10/09/2002 Application Dated: 10/09/2002 |
| Attention: Adam Wang , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MXF-A910603 |
| Name of Grantee: | Gemtek Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN Acess Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.027 |
| Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |