FCC ID MXF-M921015AG

Wireless 11a+g mini-PCI

by Gemtek Technology Co., Ltd.

Grantee Code: MXF   Product Code: M921015AG
Latest application date: 2003-12-29

FCC ID Device Details

FCC IDMXF-M921015AG
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeMXF
Product CodeM921015AG
Applicant BusinessGemtek Technology Co., Ltd. 🇹🇼
Related Domains gemteks.com adt.com.tw
Equipment ClassWireless 11a+g mini-PCI
Test FirmBureau Veritas CPS (H.K.) Ltd. Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5320 MHzOriginal Equipment2003-12-29
2412-2462 MHzOriginal Equipment2003-12-29

Exhibits

DocumentTypeAvailableFile
DoCUsers Manual2003-12-29PDF 34.4 KB
Users ManualUsers Manual2003-12-29PDF 613.4 KB
Internal Photos RevisedInternal Photos2003-12-29PDF 345.3 KB
External Photos RevisedExternal Photos2003-12-29PDF 761.7 KB
Label LocationID Label/Location Info2003-12-29PDF 123 KB
Label LocatonID Label/Location Info2003-12-29PDF 123 KB
Label SampleID Label/Location Info2003-12-29PDF 34.2 KB
Sample LabelID Label/Location Info2003-12-29PDF 34.2 KB
Operational DescriptionOperational Description2003-12-29PDF 52.7 KB
Test PhotosTest Setup Photos2003-12-29PDF 1.6 MB
Test Report Part 1 RevisedTest Report2003-12-29PDF 3.9 MB
Test Report Part 2 RevisedTest Report2003-12-29PDF 3.7 MB
Test Report Part 3 RevisedTest Report2003-12-29PDF 3.7 MB
Test Report Part 4 RevisedTest Report2003-12-29PDF 3.2 MB
Comments 1Cover Letter(s)2003-12-29PDF 44.4 KB
Comments 2Cover Letter(s)2003-12-29PDF 43.7 KB
Confidentiality LetterCover Letter(s)2003-12-29PDF 16.1 KB
Confidentiality RequestCover Letter(s)2003-12-29PDF 16.1 KB
DoCCover Letter(s)2003-12-29PDF 34.4 KB
Modular Approval Letter RevisedCover Letter(s)2003-12-29PDF 59.3 KB
Modular Request RevisedCover Letter(s)2003-12-29PDF 59.3 KB
POACover Letter(s)2003-12-29PDF 15.5 KB
RF Exposure InfoRF Exposure Info2003-12-29PDF 139.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 33 KB
Schematics Metadata onlySchematicsPDF 134.4 KB

Application Information

Application IDSNG7zQYmHkA4EI6RVMzxXg==
Final Action Date2003-12-29
Application PurposeOriginal Equipment
Applicant FRN0005801899
ModelM921015AG
Frequency Range5180-5320 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless 11a+g mini-PCI
Responsible PartyAdam Wang, Manager, Adam@gemteks.com , 886 3-598-5535
AgentEllis Ellis Ellis, Advance Data Technology Corporation, ellis@adt.com.tw , +886-3-327-0910
Technical ContactEllis Wu, Advance Data Technology Corporation, ellis@adt.com.tw , +886-3-327-0910
Non-Technical ContactEllis Wu, Advance Data Technology Corporation, ellis@adt.com.tw , +886-3-327-0910
Test FirmTommy Wu, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, tommy@adt.com.tw , 886-2-2605-2180-3
TCB Emailhotline@AmericanTCB.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output Listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20 cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM Integrators must satisfy the integral antenna requirements of 15.407(d) and advise the end user of the indoor restrictions of 15.407(e).

Applications

Application IDDatePurpose
SNG7zQYmHkA4EI6RVMzxXg==2003-12-29Original Equipment
Nj1bs7Owo+oQp5MUUT5u+w==2003-12-29Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.03515CCC, CE
5180-5320 MHz0.045000015ECC, CE
5745-5805 MHz0.03215CCC, CE

Grants

TCB Grant - Application SNG7zQYmHkA4EI6RVMzxXg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/29/2003

Application Dated: 12/29/2003
Gemtek Technology Co., Ltd.
No.15-1 Zhonghua Road
Hsinchu Industrial Park
Hukou Hsinchu, 303
Taiwan
 
Attention: Adam Wang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MXF-M921015AG
Name of Grantee:  Gemtek Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless 11a+g mini-PCI
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15E 5180.0  -  5320.0 0.045  

Power Output Listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20 cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM Integrators must satisfy the integral antenna requirements of 15.407(d) and advise the end user of the indoor restrictions of 15.407(e).

CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application SNG7zQYmHkA4EI6RVMzxXg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Gemtek Technology Co., Ltd.
No.15-1 Zhonghua Road Hsinchu Industrial Park
Hukou Hsinchu, 303
Taiwan
  Date of Grant: 12/29/2003

Application Dated: 12/29/2003
 
Attention: Adam Wang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MXF-M921015AG
Name of Grantee:  Gemtek Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless 11a+g mini-PCI
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15E 5180.0  -  5320.0 0.045  

Power Output Listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20 cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM Integrators must satisfy the integral antenna requirements of 15.407(d) and advise the end user of the indoor restrictions of 15.407(e).


CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application Nj1bs7Owo+oQp5MUUT5u+w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/29/2003

Application Dated: 12/29/2003
Gemtek Technology Co., Ltd.
No.15-1 Zhonghua Road
Hsinchu Industrial Park
Hukou Hsinchu, 303
Taiwan
 
Attention: Adam Wang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MXF-M921015AG
Name of Grantee:  Gemtek Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Wireless 11a+g mini-PCI
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15C 2412.0  -  2462.0 0.035  
CC CE 15C 5745.0  -  5805.0 0.032  

Power Output Listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20 cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM Integrators must satisfy the integral antenna requirements of 15.407(d) and advise the end user of the indoor restrictions of 15.407(e).

CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application Nj1bs7Owo+oQp5MUUT5u+w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Gemtek Technology Co., Ltd.
No.15-1 Zhonghua Road Hsinchu Industrial Park
Hukou Hsinchu, 303
Taiwan
  Date of Grant: 12/29/2003

Application Dated: 12/29/2003
 
Attention: Adam Wang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MXF-M921015AG
Name of Grantee:  Gemtek Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Wireless 11a+g mini-PCI
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15C 2412.0  -  2462.0 0.035  
CC CE 15C 5745.0  -  5805.0 0.032  

Power Output Listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20 cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM Integrators must satisfy the integral antenna requirements of 15.407(d) and advise the end user of the indoor restrictions of 15.407(e).


CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: