FCC ID MXF-M930726AG

Wireless A+G Mini PCI Card

by Gemtek Technology Co., Ltd.

Grantee Code: MXF   Product Code: M930726AG
Latest application date: 2004-08-31

FCC ID Device Details

FCC IDMXF-M930726AG
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeMXF
Product CodeM930726AG
Applicant BusinessGemtek Technology Co., Ltd. 🇹🇼
Related Domains gemteks.com
Equipment ClassWireless A+G Mini PCI Card
Test FirmAdvance Data Technology Corporation

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2004-08-31
5150-5250 MHzOriginal Equipment2004-08-31

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2004-08-31PDF 1.3 MB
Internal PhotosInternal Photos2004-08-31PDF 1 MB
External PhotosExternal Photos2004-08-31PDF 1 MB
Label Location and SampleID Label/Location Info2004-08-31PDF 146.9 KB
DescriptionOperational Description2004-08-31PDF 62.1 KB
Test Setup PhotosTest Setup Photos2004-08-31PDF 395.2 KB
Test Report Part 1Test Report2004-08-31PDF 2.9 MB
Test Report Part 2Test Report2004-08-31PDF 1.2 MB
ConfidentialityCover Letter(s)2004-08-31PDF 21.8 KB
DoCCover Letter(s)2004-08-31PDF 30.7 KB
Modular Approval LetterCover Letter(s)2004-08-31PDF 21.1 KB
POACover Letter(s)2004-08-31PDF 20.7 KB
R F Exposure InfoRF Exposure Info2004-08-31PDF 108.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 198.7 KB
Schematics Metadata onlySchematicsPDF 126.9 KB

Application Information

Application IDIf3LG0qMHEjH3KSFd610bw==
Final Action Date2004-08-31
Application PurposeOriginal Equipment
Applicant FRN0005801899
ModelM930726AG
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless A+G Mini PCI Card
Responsible PartyAdam Wang, Manager, Adam@gemteks.com , 886 3-598-5535
Technical ContactEllis Wu, Advance Data Technology Corp., ellis@adt.com.tw , +886-3-318-3232
Test FirmStephen Chen, Advance Data Technology Corporation, stephen@adt.com.tw , 8862602180
TCB Emailhotline@americantcb.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Applications

Application IDDatePurpose
If3LG0qMHEjH3KSFd610bw==2004-08-31Original Equipment
//yUfNwCmd7s6WlsVIivjQ==2004-08-31Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.036000015C19, CC
5150-5250 MHz0.01415E19, CC
5250-5350 MHz0.01415E19, CC
5725-5850 MHz0.01315E19, CC

Grants

TCB Grant - Application If3LG0qMHEjH3KSFd610bw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 08/31/2004

Application Dated: 08/31/2004
Gemtek Technology Co., Ltd.
No.15-1 Zhonghua Road
Hsinchu Industrial Park
Hukou Hsinchu, 303
Taiwan
 
Attention: Adam Wang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MXF-M930726AG
Name of Grantee:  Gemtek Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Wireless A+G Mini PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
19 CC 15C 2412.0  -  2462.0 0.036  

Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application If3LG0qMHEjH3KSFd610bw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Gemtek Technology Co., Ltd.
No.15-1 Zhonghua Road Hsinchu Industrial Park
Hukou Hsinchu, 303
Taiwan
  Date of Grant: 08/31/2004

Application Dated: 08/31/2004
 
Attention: Adam Wang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MXF-M930726AG
Name of Grantee:  Gemtek Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Wireless A+G Mini PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
19 CC 15C 2412.0  -  2462.0 0.036  

Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application //yUfNwCmd7s6WlsVIivjQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 08/31/2004

Application Dated: 08/31/2004
Gemtek Technology Co., Ltd.
No.15-1 Zhonghua Road
Hsinchu Industrial Park
Hukou Hsinchu, 303
Taiwan
 
Attention: Adam Wang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MXF-M930726AG
Name of Grantee:  Gemtek Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless A+G Mini PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
19 CC 15E 5150.0  -  5250.0 0.014  
19 CC 15E 5250.0  -  5350.0 0.014  
19 CC 15E 5725.0  -  5850.0 0.013  

Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application //yUfNwCmd7s6WlsVIivjQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Gemtek Technology Co., Ltd.
No.15-1 Zhonghua Road Hsinchu Industrial Park
Hukou Hsinchu, 303
Taiwan
  Date of Grant: 08/31/2004

Application Dated: 08/31/2004
 
Attention: Adam Wang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MXF-M930726AG
Name of Grantee:  Gemtek Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless A+G Mini PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
19 CC 15E 5150.0  -  5250.0 0.014  
19 CC 15E 5250.0  -  5350.0 0.014  
19 CC 15E 5725.0  -  5850.0 0.013  

Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


19: This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: