FCC ID MXF-P970813N

PCI Express Wireless Local Area Network (WLAN) 802.11 a/b/g/n Card

by Gemtek Technology Co., Ltd.

Grantee Code: MXF   Product Code: P970813N
Latest application date: 2008-10-30

FCC ID Device Details

FCC IDMXF-P970813N
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeMXF
Product CodeP970813N
Applicant BusinessGemtek Technology Co., Ltd. 🇹🇼
Related Domains gemteks.com adt.com.tw
Equipment ClassPCI Express Wireless Local Area Network (WLAN) 802.11 a/b/g/n Card
Test FirmBureau Veritas CPS (H.K.) Ltd. Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5320 MHzOriginal Equipment2008-10-30
2412-2462 MHzOriginal Equipment2008-10-30

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2008-10-30PDF 160.2 KB
Internal PhotosInternal Photos2008-10-30PDF 1.2 MB
External PhotosExternal Photos2008-10-30PDF 2.4 MB
LabelID Label/Location Info2008-10-30PDF 83.4 KB
Label LocationID Label/Location Info2008-10-30PDF 71.6 KB
Operational DescriptionOperational Description2008-10-30PDF 28.1 KB
Test Setup PhotosTest Setup Photos2008-10-30PDF 1.9 MB
Test Report 15CTest Report2008-10-30PDF 1.7 MB
Test Report 15ETest Report2008-10-30PDF 2.4 MB
Test Report DFSTest Report2008-10-30PDF 474.3 KB
Attestation Statement Ad Hoc DeclarationAttestation Statements2008-10-30PDF 20 KB
Confidentiality RequestCover Letter(s)2008-10-30PDF 26.9 KB
Cover Letter AgencyCover Letter(s)2008-10-30PDF 26.7 KB
Cover Letter Modular Approval RequestCover Letter(s)2008-10-30PDF 30.2 KB
RF Exposure InfoRF Exposure Info2008-10-30PDF 50.6 KB

Application Information

Application IDgiZZMF6BPJIkapzQuVwObg==
Final Action Date2008-10-30
Application PurposeOriginal Equipment
Applicant FRN0005801899
Model-P970813N
Frequency Range5180-5320 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionPCI Express Wireless Local Area Network (WLAN) 802.11 a/b/g/n Card
Responsible PartyAdam Wang, Manager, Adam@gemteks.com , 886 3-598-5535
Technical ContactGary Chang, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch - Hw, Gary_chang@adt.com.tw , 886-3-3183232
Non-Technical ContactEllis Wu, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch - Hw, ellis@adt.com.tw , 886-3-3183232
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com , 886-3-3183232
TCB Emailcertification@curtis-straus.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Single Modular

Applications

Application IDDatePurpose
giZZMF6BPJIkapzQuVwObg==2008-10-30Original Equipment
8LuT21QJXuxO/dTEpr6Ieg==2008-10-30Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.36215CCC, MO
5180-5320 MHz0.03215ECC, MO, ND
5500-5700 MHz0.03615ECC, MO, ND
5745-5825 MHz0.40615CCC, MO

Grants

TCB Grant - Application giZZMF6BPJIkapzQuVwObg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 10/30/2008

Application Dated: 10/30/2008
Gemtek Technology Co., Ltd.
No.15-1 Zhonghua Road
Hsinchu Industrial Park
Hukou Hsinchu, 303
Taiwan
 
Attention: Adam Wang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MXF-P970813N
Name of Grantee:  Gemtek Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: PCI Express Wireless Local Area Network (WLAN) 802.11 a/b/g/n Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5180.0  -  5320.0 0.032  
CC MO ND 15E 5500.0  -  5700.0 0.036  

Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions, Device is a draft 802.11n PCI Express card operating in a 2x2 MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.
Limited Single Modular

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application giZZMF6BPJIkapzQuVwObg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Gemtek Technology Co., Ltd.
No.15-1 Zhonghua Road Hsinchu Industrial Park
Hukou Hsinchu, 303
Taiwan
  Date of Grant: 10/30/2008

Application Dated: 10/30/2008
 
Attention: Adam Wang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MXF-P970813N
Name of Grantee:  Gemtek Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: PCI Express Wireless Local Area Network (WLAN) 802.11 a/b/g/n Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5180.0  -  5320.0 0.032  
CC MO ND 15E 5500.0  -  5700.0 0.036  

Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions, Device is a draft 802.11n PCI Express card operating in a 2x2 MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.

Limited Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 8LuT21QJXuxO/dTEpr6Ieg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 10/30/2008

Application Dated: 10/30/2008
Gemtek Technology Co., Ltd.
No.15-1 Zhonghua Road
Hsinchu Industrial Park
Hukou Hsinchu, 303
Taiwan
 
Attention: Adam Wang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MXF-P970813N
Name of Grantee:  Gemtek Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: PCI Express Wireless Local Area Network (WLAN) 802.11 a/b/g/n Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.362  
CC MO 15C 5745.0  -  5825.0 0.406  

Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions, Device is a draft 802.11n PCI Express card operating in a 2x2 MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Limited Single Modular

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 8LuT21QJXuxO/dTEpr6Ieg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Gemtek Technology Co., Ltd.
No.15-1 Zhonghua Road Hsinchu Industrial Park
Hukou Hsinchu, 303
Taiwan
  Date of Grant: 10/30/2008

Application Dated: 10/30/2008
 
Attention: Adam Wang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MXF-P970813N
Name of Grantee:  Gemtek Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: PCI Express Wireless Local Area Network (WLAN) 802.11 a/b/g/n Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.362  
CC MO 15C 5745.0  -  5825.0 0.406  

Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions, Device is a draft 802.11n PCI Express card operating in a 2x2 MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

Limited Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: