FCC ID MXF-WMDD209A

Lora module

by Gemtek Technology Co., Ltd.

Grantee Code: MXF   Product Code: WMDD209A
Latest application date: 2017-10-19

FCC ID Device Details

FCC IDMXF-WMDD209A
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeMXF
Product CodeWMDD209A
Applicant BusinessGemtek Technology Co., Ltd. 🇹🇼
Related Domains gemteks.com icertifi.com.tw
Equipment ClassLora module
Test FirmInternational Certification Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
903-914.2 MHzOriginal Equipment2017-10-19
902.3-914.9 MHzOriginal Equipment2017-10-19

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2017-10-19PDF 225.8 KB
Internal PhotosInternal Photos2017-10-19PDF 587.4 KB
External PhotosExternal Photos2017-10-19PDF 587.3 KB
ID Label/Location InfoID Label/Location Info2017-10-19PDF 162.2 KB
Test Setup Photos_DTSTest Setup Photos2017-10-19PDF 2 MB
Test Report_DSSTest Report2017-10-19PDF 2.4 MB
Test Report_DTSTest Report2017-10-19PDF 1.2 MB
DoCCover Letter(s)2017-10-19PDF 230.4 KB
Modular Approval Request LetterCover Letter(s)2017-10-19PDF 179.2 KB
POACover Letter(s)2017-10-19PDF 322.2 KB
confidentialityCover Letter(s)2017-10-19PDF 299.1 KB
MPE ReportRF Exposure Info2017-10-19PDF 211.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 221.6 KB
Schematics Metadata onlySchematicsPDF 265.2 KB
Operational Description Metadata onlyOperational DescriptionPDF 117.5 KB

Application Information

Application IDs+tY6/irh380Wpnql9xP/g==
Final Action Date2017-10-19
Application PurposeOriginal Equipment
Applicant FRN0005801899
ModelWMDD209A
Frequency Range903-914.2 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionLora module
Responsible PartyAdam Wang, Manager, Adam@gemteks.com , 886 3-598-5535
AgentGary Gary Gary, International Certification Corp., GaryChang@icertifi.com.tw , 886-3-271-8628
Technical ContactGary Chang, International Certification Corp., 886-3-271-8628
Non-Technical ContactWendy Liao, International Certification Corp., wendyLiao@icertifi.com.tw , 886-3-271-8629
Test FirmFu-Cheng Chuang, International Certification Corp., Jeff@icertifi.com.tw , 886-3-271-8666
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
s+tY6/irh380Wpnql9xP/g==2017-10-19Original Equipment
2Jdg0GIyPhB1ANf1kMxIGg==2017-10-19Original Equipment

Equipment Authorization

FrequencyOutputRules
902.3-914.9 MHz0.080000015C
903-914.2 MHz0.077000015C

Grants

TCB Grant - Application s+tY6/irh380Wpnql9xP/g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 10/19/2017

Application Dated: 10/18/2017
Gemtek Technology Co., Ltd.
No.15-1 Zhonghua Road
Hsinchu Industrial Park
Hukou Hsinchu, 303
Taiwan
 
Attention: Adam Wang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MXF-WMDD209A
Name of Grantee:  Gemtek Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Lora module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 903.0  -  914.2 0.077  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application s+tY6/irh380Wpnql9xP/g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Gemtek Technology Co., Ltd.
No.15-1 Zhonghua Road Hsinchu Industrial Park
Hukou Hsinchu, 303
Taiwan
  Date of Grant: 10/19/2017

Application Dated: 10/18/2017
 
Attention: Adam Wang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MXF-WMDD209A
Name of Grantee:  Gemtek Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Lora module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 903.0  -  914.2 0.077  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application 2Jdg0GIyPhB1ANf1kMxIGg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 10/19/2017

Application Dated: 10/18/2017
Gemtek Technology Co., Ltd.
No.15-1 Zhonghua Road
Hsinchu Industrial Park
Hukou Hsinchu, 303
Taiwan
 
Attention: Adam Wang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MXF-WMDD209A
Name of Grantee:  Gemtek Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Lora module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.3  -  914.9 0.08  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 2Jdg0GIyPhB1ANf1kMxIGg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Gemtek Technology Co., Ltd.
No.15-1 Zhonghua Road Hsinchu Industrial Park
Hukou Hsinchu, 303
Taiwan
  Date of Grant: 10/19/2017

Application Dated: 10/18/2017
 
Attention: Adam Wang , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  MXF-WMDD209A
Name of Grantee:  Gemtek Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Lora module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.3  -  914.9 0.08  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: