FCC ID N52-ADXV

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131

Date of Grant: 06/14/2016 Application Dated: 06/14/2016

ADRF KOREA, Inc.

5-5, Mojeon-Ri, Backsa-Myun, Icheon-City,

Kyunggi-Do,, South Korea

Attention: Hyun-Kyung Song , Management Support Team Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	N52-ADXV
Name of Grantee:	ADRF KOREA, Inc.
Equipment Class:	Part 20 Industrial Booster (CMRS)
Notes:	DAS(Distributed Antenna System)

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	27	729.0  -  756.0	2.71	Amp	G7W
	90S	862.0  -  869.0	2.075	Amp	G7W
	22H	869.0  -  894.0	2.265	Amp	G7W
	24E	1930.0  -  1995.0	6.039	Amp	G7W
	27	2110.0  -  2180.0	5.834	Amp	G7W

Output power is conducted. This device supports LTE bandwidths of 5, 10, and 20MHz. This transmitter operates as a remote unit as part of a system along with base station interface unit as described in this filing, and excluding any other devices connected to the (uplink) transmit output terminal of the base station interface unit. This application covers only the system configuration with base interface unit connected to a base station RF port in the uplink transmit path; operations of this remote unit if any in a system with base interface unit connected to antenna or amplifier for uplink transmissions require separate equipment authorization. This device is authorized to operate only as part of a distributed-antenna booster system installed in buildings. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of Sec. 1.1307(b)(3), for satisfying RF exposure compliance. RF exposure will be addressed at time of installation and the use of higher gain antennas may require larger separation distances.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

ADRF KOREA, Inc. 5-5, Mojeon-Ri, Backsa-Myun, Icheon-City, P.O. Box , Kyunggi-Do,, South Korea

Date of Grant: 06/14/2016 Application Dated: 06/14/2016

Attention: Hyun-Kyung Song , Management Support Team Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	N52-ADXV
Name of Grantee:	ADRF KOREA, Inc.
Equipment Class:	Part 20 Industrial Booster (CMRS)
Notes:	DAS(Distributed Antenna System)
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	27	729.0  -  756.0	2.71	Amp	G7W
	90S	862.0  -  869.0	2.075	Amp	G7W
	22H	869.0  -  894.0	2.265	Amp	G7W
	24E	1930.0  -  1995.0	6.039	Amp	G7W
	27	2110.0  -  2180.0	5.834	Amp	G7W

Output power is conducted. This device supports LTE bandwidths of 5, 10, and 20MHz. This transmitter operates as a remote unit as part of a system along with base station interface unit as described in this filing, and excluding any other devices connected to the (uplink) transmit output terminal of the base station interface unit. This application covers only the system configuration with base interface unit connected to a base station RF port in the uplink transmit path; operations of this remote unit if any in a system with base interface unit connected to antenna or amplifier for uplink transmissions require separate equipment authorization. This device is authorized to operate only as part of a distributed-antenna booster system installed in buildings. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of Sec. 1.1307(b)(3), for satisfying RF exposure compliance. RF exposure will be addressed at time of installation and the use of higher gain antennas may require larger separation distances.

TCB Grant - Application CBoyd7atzKTRVLjLXYCu+g==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131

Date of Grant: 03/15/2023 Application Dated: 03/15/2023

ADRF KOREA, Inc.

5-5, Mojeon-Ri, Backsa-Myun, Icheon-City,

Kyunggi-Do,, South Korea

Attention: Hyun-Kyung Song , Management Support Team Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	N52-ADXV
Name of Grantee:	ADRF KOREA, Inc.
Equipment Class:	Part 20 Industrial Booster (CMRS)
Notes:	DAS

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	27	728.0  -  757.0	2.71	Amp	G7W
	90S	862.0  -  869.0	2.075	Amp	G7W
	22H	869.0  -  894.0	2.265	Amp	G7W
	24E	1930.0  -  1995.0	6.039	Amp	G7W
	27	2110.0  -  2180.0	5.834	Amp	G7W

Class II Permissive Change to expand the frequency of operation in the 700MHz bands and add the following 5G NR Bandwidth capabilities; (728-746 MHz) 10 MHz, (746-757 MHz) 10 MHz, (862-869 MHz) 5 MHz, (869-894 MHz) 20 MHz, (1930-1995 MHz) 60 MHz and (2110-2180 MHz) 60 MHz. Output power is conducted. This device supports the following bandwidths: 728-757MHz: LTE 10MHz, NR 10MHz; 862-869MHz: LTE 5MHz, NR 5MHz; 869-894MHz: LTE 10MHz, NR 20MHz; 1930-1995MHz: LTE 20MHz, NR 60MHz; 2110-2180MHz; LTE 20MHz, NR 60MHz. This transmitter operates as a remote unit as part of a system along with base station interface unit as described in this filing, and excluding any other devices connected to the (uplink) transmit output terminal of the base station interface unit. This application covers only the system configuration with base interface unit connected to a base station RF port in the uplink transmit path; operations of this remote unit if any in a system with base interface unit connected to antenna or amplifier for uplink transmissions require separate equipment authorization. This device is authorized to operate only as part of a distributed-antenna booster system installed in buildings. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of Sec. 1.1307(b)(3), for satisfying RF exposure compliance. RF exposure will be addressed at time of installation and the use of higher gain antennas may require larger separation distances. The single unit RF Exposure separation between persons and the antenna is 100cm for a 3.9dBi antenna, 200cm for a 9.9dBi antenna and 300cm for a 13.4dBi antenna.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

ADRF KOREA, Inc. 5-5, Mojeon-Ri, Backsa-Myun, Icheon-City, P.O. Box , Kyunggi-Do,, South Korea

Date of Grant: 03/15/2023 Application Dated: 03/15/2023

Attention: Hyun-Kyung Song , Management Support Team Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	N52-ADXV
Name of Grantee:	ADRF KOREA, Inc.
Equipment Class:	Part 20 Industrial Booster (CMRS)
Notes:	DAS
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	27	728.0  -  757.0	2.71	Amp	G7W
	90S	862.0  -  869.0	2.075	Amp	G7W
	22H	869.0  -  894.0	2.265	Amp	G7W
	24E	1930.0  -  1995.0	6.039	Amp	G7W
	27	2110.0  -  2180.0	5.834	Amp	G7W

Class II Permissive Change to expand the frequency of operation in the 700MHz bands and add the following 5G NR Bandwidth capabilities; (728-746 MHz) 10 MHz, (746-757 MHz) 10 MHz, (862-869 MHz) 5 MHz, (869-894 MHz) 20 MHz, (1930-1995 MHz) 60 MHz and (2110-2180 MHz) 60 MHz. Output power is conducted. This device supports the following bandwidths: 728-757MHz: LTE 10MHz, NR 10MHz; 862-869MHz: LTE 5MHz, NR 5MHz; 869-894MHz: LTE 10MHz, NR 20MHz; 1930-1995MHz: LTE 20MHz, NR 60MHz; 2110-2180MHz; LTE 20MHz, NR 60MHz. This transmitter operates as a remote unit as part of a system along with base station interface unit as described in this filing, and excluding any other devices connected to the (uplink) transmit output terminal of the base station interface unit. This application covers only the system configuration with base interface unit connected to a base station RF port in the uplink transmit path; operations of this remote unit if any in a system with base interface unit connected to antenna or amplifier for uplink transmissions require separate equipment authorization. This device is authorized to operate only as part of a distributed-antenna booster system installed in buildings. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of Sec. 1.1307(b)(3), for satisfying RF exposure compliance. RF exposure will be addressed at time of installation and the use of higher gain antennas may require larger separation distances. The single unit RF Exposure separation between persons and the antenna is 100cm for a 3.9dBi antenna, 200cm for a 9.9dBi antenna and 300cm for a 13.4dBi antenna.

Mail To: