FCC ID N52-ADXVR3378PU2B

DAS

by ADRF KOREA, Inc.

Grantee Code: N52   Product Code: ADXVR3378PU2B
Latest application date: 2024-12-23

FCC ID Device Details

FCC IDN52-ADXVR3378PU2B
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeN52
Product CodeADXVR3378PU2B
Applicant BusinessADRF KOREA, Inc. 🇰🇷
Related Domains adrftech.com
Equipment ClassDAS
Test FirmHCT Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
758-768 MHzOriginal Equipment2024-12-23
862-869 MHzOriginal Equipment2024-12-23

Exhibits

DocumentTypeAvailableFile
ADXV-R-3378P-U2B_User manual_R1Users Manual2025-06-21PDF 1.9 MB
ADXV-R-3378P-U2B_Internal Photos_R1Internal Photos2025-06-21PDF 1.5 MB
ADXV-R-3378P-U2B_External PhotosExternal Photos2025-06-21PDF 956.1 KB
ADXV-R-3378P-U2B_LABEL LOCATIONID Label/Location Info2024-12-23PDF 703.2 KB
N52-ADXVR3378PU2B_Annex B_EUT and Test Setup PhotoTest Setup Photos2025-06-21PDF 1,002.2 KB
N52-ADXVR3378PU2B_FCC Test ReportTest Report2024-12-23PDF 4.2 MB
N52-ADXVR3378PU2B_Attestation letter for Warning_R1Attestation Statements2024-12-23PDF 130.5 KB
N52-ADXVR3378PU2B_Covered List Attestation Letter Metadata onlyAttestation Statements2024-12-23PDF 213 KB
N52-ADXVR3378PU2B_Covered List Attestation Letter_R1Attestation Statements2024-12-23PDF 212.9 KB
N52-ADXVR3378PU2B_U.S. Agent for Service of Process AttestationAttestation Statements2024-12-23PDF 215.6 KB
N52-ADXVR3378PU2B_FCC Agent Authorization LetterCover Letter(s)2024-12-23PDF 170.1 KB
N52-ADXVR3378PU2B_FCC Confidentiality Request LetterCover Letter(s)2024-12-23PDF 172.3 KB
N52-ADXVR3378PU2B_FCC RF EXPOSURE ReportRF Exposure Info2024-12-23PDF 277.6 KB
ADXV-R-3378P-U2B_Block Diagram_R1 Metadata onlyBlock DiagramPDF 145.6 KB
ADXV-R-3378P-U2B_Circuit diagram Metadata onlySchematicsPDF 4.3 MB
ADXV-R-3378P-U2B_Operating descrpition_R1 Metadata onlyOperational DescriptionPDF 349.3 KB
ADXV-R-3378P-U2B_Part list Metadata onlyParts List/Tune Up InfoPDF 3.4 MB
ADXV-R-3378P-U2B_Tune up procedure Metadata onlyParts List/Tune Up InfoPDF 235.9 KB

Application Information

Application IDz0x1xovCD9gfdCq6GeVGOA==
Final Action Date2024-12-23
Application PurposeOriginal Equipment
Applicant FRN0021709860
ModelADXVR3378PU2B
Frequency Range758-768 MHz
Equipment ClassB9B - Part 90 Class B Industrial Booster (non-SMR)
Device DescriptionDAS
Responsible PartyHyun-Kyung Song, Business Strategy Department Director, hk4464@adrftech.com , +82-31-637-4435
Test FirmLee MyoungLim, HCT Co., Ltd., lmlim@hct.co.kr , 82-31-645-6918
TCB Emailcharvey@ieee.org , jennifer.s@hctamerica.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityYes
Short-Term Confidentiality Date06/21/2025
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsIn-Building DAS Industrial Booster. Power output listed is conducted. This Class B Booster is deployed with 5-Watt maximum ERP according to §90.219(d)(3) with antenna gain, including cable loss, not exceeding 3.5 dBi. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements for satisfying RF exposure compliance. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. The antenna used for this transmitter is to be fixed-mounted on outdoor permanent structures. The single unit RF Exposure compliance for the device was based on maximum antenna gain 3.5 dBi with minimum separation distance 80 cm. RF exposure compliance must need to be addressed at the time of licensing as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b) (3) of the rules.

Applications

Application IDDatePurpose
z0x1xovCD9gfdCq6GeVGOA==2024-12-23Original Equipment
127wvHjhvtZhuhfaUyNFIw==2024-12-23Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
758-768 MHz2.203AmpG7W9
769-775 MHz2.148AmpF1W9
851-854 MHz2.023AmpF1W9
854-861 MHz2.018AmpF1W9
862-869 MHz2.1230000AmpF1W90S

Grants

TCB Grant - Application z0x1xovCD9gfdCq6GeVGOA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  HCT America, Inc.
1726 Ringwood Avenue
San Jose, CA 95131
Date of Grant: 12/23/2024

Application Dated: 12/17/2024
ADRF KOREA, Inc.
196-16 IYEO-RO BAEKSA-MYEON,
ICHEON-SI, GYEONGGI-DO,, 17316
South Korea
 
Attention: Hyun-Kyung Song , Business Strategy Department Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N52-ADXVR3378PU2B
Name of Grantee:  ADRF KOREA, Inc.
Equipment Class: Part 90 Class B Industrial Booster (non-SMR)
Notes: DAS
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 758.0  -  768.0 2.203  Amp G7W
90 769.0  -  775.0 2.148  Amp F1W
90 851.0  -  854.0 2.023  Amp F1W
90 854.0  -  861.0 2.018  Amp F1W

In-Building DAS Industrial Booster. Power output listed is conducted. This Class B Booster is deployed with 5-Watt maximum ERP according to §90.219(d)(3) with antenna gain, including cable loss, not exceeding 3.5 dBi. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements for satisfying RF exposure compliance. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. The antenna used for this transmitter is to be fixed-mounted on outdoor permanent structures. The single unit RF Exposure compliance for the device was based on maximum antenna gain 3.5 dBi with minimum separation distance 80 cm. RF exposure compliance must need to be addressed at the time of licensing as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b) (3) of the rules.

EAS Grant - Application z0x1xovCD9gfdCq6GeVGOA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ADRF KOREA, Inc.
196-16 IYEO-RO BAEKSA-MYEON,
ICHEON-SI, GYEONGGI-DO,, 17316
South Korea
  Date of Grant: 12/23/2024

Application Dated: 12/17/2024
 
Attention: Hyun-Kyung Song , Business Strategy Department Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N52-ADXVR3378PU2B
Name of Grantee:  ADRF KOREA, Inc.
Equipment Class: Part 90 Class B Industrial Booster (non-SMR)
Notes: DAS
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 758.0  -  768.0 2.203  Amp G7W
90 769.0  -  775.0 2.148  Amp F1W
90 851.0  -  854.0 2.023  Amp F1W
90 854.0  -  861.0 2.018  Amp F1W

In-Building DAS Industrial Booster. Power output listed is conducted. This Class B Booster is deployed with 5-Watt maximum ERP according to §90.219(d)(3) with antenna gain, including cable loss, not exceeding 3.5 dBi. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements for satisfying RF exposure compliance. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. The antenna used for this transmitter is to be fixed-mounted on outdoor permanent structures. The single unit RF Exposure compliance for the device was based on maximum antenna gain 3.5 dBi with minimum separation distance 80 cm. RF exposure compliance must need to be addressed at the time of licensing as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b) (3) of the rules.



TCB Grant - Application 127wvHjhvtZhuhfaUyNFIw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  HCT America, Inc.
1726 Ringwood Avenue
San Jose, CA 95131
Date of Grant: 12/23/2024

Application Dated: 12/17/2024
ADRF KOREA, Inc.
196-16 IYEO-RO BAEKSA-MYEON,
ICHEON-SI, GYEONGGI-DO,, 17316
South Korea
 
Attention: Hyun-Kyung Song , Business Strategy Department Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N52-ADXVR3378PU2B
Name of Grantee:  ADRF KOREA, Inc.
Equipment Class: Part 20 Industrial Booster (CMRS)
Notes: DAS
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90S 862.0  -  869.0 2.123  Amp F1W

In-Building DAS Industrial Booster. Power output listed is conducted. This Class B Booster is deployed with 5-Watt maximum ERP according to §90.219(d)(3) with antenna gain, including cable loss, not exceeding 3.5 dBi. This transmitter operates as a remote unit as part of a system along with base station interface unit as described in this filing. This device is authorized to operate only as part of a distributed-antenna booster system installed in buildings. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements for satisfying RF exposure compliance. The antenna used for this transmitter is to be fixed-mounted on indoor structures. The single unit RF Exposure compliance for the device was based on maximum antenna gain 3.5 dBi with minimum separation distance 80 cm. RF exposure compliance must need to be addressed at the time of licensing as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b) (3) of the rules.

EAS Grant - Application 127wvHjhvtZhuhfaUyNFIw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ADRF KOREA, Inc.
196-16 IYEO-RO BAEKSA-MYEON,
ICHEON-SI, GYEONGGI-DO,, 17316
South Korea
  Date of Grant: 12/23/2024

Application Dated: 12/17/2024
 
Attention: Hyun-Kyung Song , Business Strategy Department Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N52-ADXVR3378PU2B
Name of Grantee:  ADRF KOREA, Inc.
Equipment Class: Part 20 Industrial Booster (CMRS)
Notes: DAS
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90S 862.0  -  869.0 2.123  Amp F1W

In-Building DAS Industrial Booster. Power output listed is conducted. This Class B Booster is deployed with 5-Watt maximum ERP according to §90.219(d)(3) with antenna gain, including cable loss, not exceeding 3.5 dBi. This transmitter operates as a remote unit as part of a system along with base station interface unit as described in this filing. This device is authorized to operate only as part of a distributed-antenna booster system installed in buildings. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements for satisfying RF exposure compliance. The antenna used for this transmitter is to be fixed-mounted on indoor structures. The single unit RF Exposure compliance for the device was based on maximum antenna gain 3.5 dBi with minimum separation distance 80 cm. RF exposure compliance must need to be addressed at the time of licensing as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b) (3) of the rules.



Mail To: