FCC ID N52-PSR-VU-9537A

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131

Date of Grant: 10/14/2021 Application Dated: 10/14/2021

ADRF KOREA, Inc.

5-5, Mojeon-Ri, Backsa-Myun, Icheon-City,

Kyunggi-Do,, South Korea

Attention: Hyun-Kyung Song , Management Support Team Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	N52-PSR-VU-9537A
Name of Grantee:	ADRF KOREA, Inc.
Equipment Class:	Part 90 Class A Industrial Booster (non-SMR)
Notes:	Repeater

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	150.0  -  174.0	0.92	Amp	FXD
	90	150.0  -  174.0	0.414	Amp	FXD
	90	406.1  -  470.0	5.768	Amp	FXD
	90	406.1  -  470.0	0.631	Amp	FXD
	90	470.0  -  512.0	5.395	Amp	FXD
	90	470.0  -  512.0	0.565	Amp	FXD

Class II Permissive Change for enclosure and power connection changes. Repeater. Power output listed is conducted. This Class A Booster is deployed with 5 Watt maximum ERP according to §90.219(d)(3). Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements for satisfying RF exposure compliance. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. The antenna used for this transmitter is to be fixed-mounted on indoor / outdoor permanent structures. RF exposure compliance must need to be addressed at the time of licensing as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b) (3) of the rules.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

ADRF KOREA, Inc. 5-5, Mojeon-Ri, Backsa-Myun, Icheon-City, P.O. Box , Kyunggi-Do,, South Korea

Date of Grant: 10/14/2021 Application Dated: 10/14/2021

Attention: Hyun-Kyung Song , Management Support Team Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	N52-PSR-VU-9537A
Name of Grantee:	ADRF KOREA, Inc.
Equipment Class:	Part 90 Class A Industrial Booster (non-SMR)
Notes:	Repeater
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	150.0  -  174.0	0.92	Amp	FXD
	90	150.0  -  174.0	0.414	Amp	FXD
	90	406.1  -  470.0	5.768	Amp	FXD
	90	406.1  -  470.0	0.631	Amp	FXD
	90	470.0  -  512.0	5.395	Amp	FXD
	90	470.0  -  512.0	0.565	Amp	FXD

Class II Permissive Change for enclosure and power connection changes. Repeater. Power output listed is conducted. This Class A Booster is deployed with 5 Watt maximum ERP according to §90.219(d)(3). Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements for satisfying RF exposure compliance. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. The antenna used for this transmitter is to be fixed-mounted on indoor / outdoor permanent structures. RF exposure compliance must need to be addressed at the time of licensing as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b) (3) of the rules.

TCB Grant - Application 28T+ZF9P7uZCVnIoWSucpQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131

Date of Grant: 01/24/2017 Application Dated: 01/24/2017

ADRF KOREA, Inc.

5-5, Mojeon-Ri, Backsa-Myun, Icheon-City,

Kyunggi-Do,, South Korea

Attention: Hyun-Kyung Song , Management Support Team Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	N52-PSR-VU-9537A
Name of Grantee:	ADRF KOREA, Inc.
Equipment Class:	Part 90 Class A Industrial Booster (non-SMR)
Notes:	Repeater

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	150.0  -  174.0	0.92	Amp	FXD
	90	150.0  -  174.0	0.414	Amp	FXD
	90	406.1  -  470.0	5.768	Amp	FXD
	90	406.1  -  470.0	0.631	Amp	FXD
	90	470.0  -  512.0	5.395	Amp	FXD
	90	470.0  -  512.0	0.565	Amp	FXD

Repeater. Power output listed is conducted. The specific station authorizations are required for equipment operations exceeding due to exceeding maximum 5W ERP limitation §90.219(d)(4) conditions. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements for satisfying RF exposure compliance. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. The antenna used for this transmitter is to be fixed-mounted on indoor / outdoor permanent structures. RF exposure compliance must need to be addressed at the time of licensing as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b) (3) of the rules.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

ADRF KOREA, Inc. 5-5, Mojeon-Ri, Backsa-Myun, Icheon-City, P.O. Box , Kyunggi-Do,, South Korea

Date of Grant: 01/24/2017 Application Dated: 01/24/2017

Attention: Hyun-Kyung Song , Management Support Team Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	N52-PSR-VU-9537A
Name of Grantee:	ADRF KOREA, Inc.
Equipment Class:	Part 90 Class A Industrial Booster (non-SMR)
Notes:	Repeater
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	150.0  -  174.0	0.92	Amp	FXD
	90	150.0  -  174.0	0.414	Amp	FXD
	90	406.1  -  470.0	5.768	Amp	FXD
	90	406.1  -  470.0	0.631	Amp	FXD
	90	470.0  -  512.0	5.395	Amp	FXD
	90	470.0  -  512.0	0.565	Amp	FXD

Repeater. Power output listed is conducted. The specific station authorizations are required for equipment operations exceeding due to exceeding maximum 5W ERP limitation §90.219(d)(4) conditions. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements for satisfying RF exposure compliance. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. The antenna used for this transmitter is to be fixed-mounted on indoor / outdoor permanent structures. RF exposure compliance must need to be addressed at the time of licensing as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b) (3) of the rules.

Mail To: