FCC ID N5OTR064

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada

Date of Grant: 04/26/2021 Application Dated: 03/19/2021

Scanreco AB

Stensatravagen 13

P.O. Box 90304,

Stockholm, SE-12739 Sweden

Attention: Bjorn Askestig , Vice President

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	N5OTR064
Name of Grantee:	Scanreco AB
Equipment Class:	Digital Transmission System
Notes:	TR06 Transceiver Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2405.0  -  2480.0	0.047

Single Modular Approval. Output power is conducted. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. To comply with FCC RF exposure limits for general population / uncontrolled exposure, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. For radio modules installed into the hand-held / hand operated hosts the minimum separation distance from antenna to hands is 5 mm for the 2.4GHz frequency band. This device must operate with a maximum duty factor not exceeding 4.3 % for the 2.4GHz frequency band. The grantee is the OEM supplier for all host products. The module will be only installed in host products by or under the control of the grantee.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Scanreco AB Stensatravagen 13 P.O. Box 90304, Stockholm, SE-12739 Sweden

Date of Grant: 04/26/2021 Application Dated: 03/19/2021

Attention: Bjorn Askestig , Vice President

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	N5OTR064
Name of Grantee:	Scanreco AB
Equipment Class:	Digital Transmission System
Notes:	TR06 Transceiver Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2405.0  -  2480.0	0.047

Single Modular Approval. Output power is conducted. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. To comply with FCC RF exposure limits for general population / uncontrolled exposure, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. For radio modules installed into the hand-held / hand operated hosts the minimum separation distance from antenna to hands is 5 mm for the 2.4GHz frequency band. This device must operate with a maximum duty factor not exceeding 4.3 % for the 2.4GHz frequency band. The grantee is the OEM supplier for all host products. The module will be only installed in host products by or under the control of the grantee.

TCB Grant - Application g+WZDdOHs7GspLdcIDKdjA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada

Date of Grant: 04/26/2021 Application Dated: 03/19/2021

Scanreco AB

Stensatravagen 13

P.O. Box 90304,

Stockholm, SE-12739 Sweden

Attention: Bjorn Askestig , Vice President

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	N5OTR064
Name of Grantee:	Scanreco AB
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	TR06 Transceiver Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	903.5  -  926.53	0.92
	15C	2405.0  -  2480.0	0.12

Single Modular Approval. Output power is conducted. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. To comply with FCC RF exposure limits for general population / uncontrolled exposure, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. For radio modules installed into the hand-held / hand operated hosts the minimum separation distance from antenna to hands is 5 mm for the 2.4GHz frequency band and 30 mm for the 915MHz frequency band. This device must operate with a maximum duty factor not exceeding 4.3 % for the 2.4GHz frequency band and 21% for the 915 MHz frequency band. The grantee is the OEM supplier for all host products. The module will be only installed in host products by or under the control of the grantee.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Scanreco AB Stensatravagen 13 P.O. Box 90304, Stockholm, SE-12739 Sweden

Date of Grant: 04/26/2021 Application Dated: 03/19/2021

Attention: Bjorn Askestig , Vice President

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	N5OTR064
Name of Grantee:	Scanreco AB
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	TR06 Transceiver Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	903.5  -  926.53	0.92
	15C	2405.0  -  2480.0	0.12

Single Modular Approval. Output power is conducted. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. To comply with FCC RF exposure limits for general population / uncontrolled exposure, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. For radio modules installed into the hand-held / hand operated hosts the minimum separation distance from antenna to hands is 5 mm for the 2.4GHz frequency band and 30 mm for the 915MHz frequency band. This device must operate with a maximum duty factor not exceeding 4.3 % for the 2.4GHz frequency band and 21% for the 915 MHz frequency band. The grantee is the OEM supplier for all host products. The module will be only installed in host products by or under the control of the grantee.

Mail To: