FCC ID N6C-AP200AC

Wireless LAN Access Point

by Silex Technology, Inc.

Grantee Code: N6C   Product Code: AP200AC
Latest application date: 2021-06-01

FCC ID Device Details

FCC IDN6C-AP200AC
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeN6C
Product CodeAP200AC
Applicant BusinessSilex Technology, Inc. 🇯🇵
Related Domains silex.jp
Equipment ClassWireless LAN Access Point
Test FirmDEKRA TESTING AND CERTIFICATION Hsin Chu Lab.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2021-06-01
2412-2462 MHzOriginal Equipment2021-06-01

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2021-11-28PDF 484.1 KB
Internal PhotosInternal Photos2021-11-28PDF 2.1 MB
External PhotosExternal Photos2021-11-28PDF 749.1 KB
Label LocationID Label/Location Info2021-06-01PDF 865 KB
Label SampleID Label/Location Info2021-06-01PDF 227.7 KB
Test Setup PhotoTest Setup Photos2021-11-28PDF 595.9 KB
Test Setup PhotosTest Setup Photos2021-11-28PDF 595.9 KB
TestRpt_2.4G-1Test Report2021-06-01PDF 4.1 MB
TestRpt_2.4G-2Test Report2021-06-01PDF 4.3 MB
TestRpt_5G-1Test Report2021-06-01PDF 3.5 MB
TestRpt_5G-2Test Report2021-06-01PDF 4 MB
Confidential RequestCover Letter(s)2021-06-01PDF 47.9 KB
Declaration of AuthorizationCover Letter(s)2021-06-01PDF 27.8 KB
TestRpt_MPERF Exposure Info2021-06-01PDF 181.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 245.6 KB
Schematics Metadata onlySchematicsPDF 1.3 MB
Operational Description Metadata onlyOperational DescriptionPDF 604.3 KB
SW Security Op Description Metadata onlySDR Software/Security InfPDF 263 KB

Application Information

Application IDjJhmSGjIqueslM3Lou8qsQ==
Final Action Date2021-06-01
Application PurposeOriginal Equipment
Applicant FRN0013616305
ModelAP200AC
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless LAN Access Point
Responsible PartyYoshinori Nakai, General Manager, nakai@silex.jp , 81 774-98-3781
Test FirmWarren Lin, DEKRA TESTING AND CERTIFICATION Hsin Chu Lab., warren.lin@dekra.com , 886-3-582-8001
TCB Emailtei@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date11/28/2021
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.

Applications

Application IDDatePurpose
jJhmSGjIqueslM3Lou8qsQ==2021-06-01Original Equipment
1vg2u+CJMq/AsQByDJCgXA==2021-06-01Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.306000015CCC, MO
5180-5240 MHz0.17615ECC, MO
5745-5825 MHz0.22415ECC, MO

Grants

TCB Grant - Application jJhmSGjIqueslM3Lou8qsQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 06/01/2021

Application Dated: 05/28/2021
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-AP200AC
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.176  
CC MO 15E 5745.0  -  5825.0 0.224  

Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application jJhmSGjIqueslM3Lou8qsQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 06/01/2021

Application Dated: 05/28/2021
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-AP200AC
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.176  
CC MO 15E 5745.0  -  5825.0 0.224  

Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 1vg2u+CJMq/AsQByDJCgXA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 06/01/2021

Application Dated: 05/28/2021
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-AP200AC
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.306  

Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 1vg2u+CJMq/AsQByDJCgXA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 06/01/2021

Application Dated: 05/28/2021
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-AP200AC
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.306  

Power listed is maximum power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: