FCC ID N6C-IM100
Embedded wireless module
by Silex Technology, Inc.
Grantee Code: N6C Product Code: IM100
Latest application date: 2025-01-14
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-01-14 |
| 2402-2480 MHz | Original Equipment | 2024-05-17 |
| 5180-5240 MHz | Original Equipment | 2024-05-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual (Trace Antenna Figure) rev | Users Manual | 2024-05-27 | PDF 69.2 KB |
| Users Manual (Trace Antenna Integration Procedures) rev | Users Manual | 2024-05-27 | PDF 176.1 KB |
| Users Manual rev | Users Manual | 2024-05-27 | PDF 849.5 KB |
| Internal Photos rev 2 | Internal Photos | 2024-05-27 | PDF 985.4 KB |
| External Photos rev 2 | External Photos | 2024-05-27 | PDF 790.3 KB |
| Label Sample & Label Location | ID Label/Location Info | 2024-05-17 | PDF 90.7 KB |
| Test Set Up Photos (2.4G & BT) | Test Setup Photos | 2024-05-27 | PDF 316 KB |
| Test Set Up Photos (5G) | Test Setup Photos | 2024-05-27 | PDF 385.9 KB |
| Test Set Up Photos (Antenna spec.) rev | Test Setup Photos | 2024-05-27 | PDF 779.3 KB |
| Test Set Up Photos (DFS) | Test Setup Photos | 2024-05-27 | PDF 36.4 KB |
| Test Report rev | Test Report | 2025-01-14 | PDF 577.7 KB |
| Antenna Datasheet (146153) | Test Report | 2024-05-17 | PDF 701.7 KB |
| Antenna Datasheet (AA258) | Test Report | 2024-05-17 | PDF 2 MB |
| Test Report (Antenna Report) rev | Test Report | 2024-05-17 | PDF 2.8 MB |
| Test Report (Co-located) rev | Test Report | 2024-05-17 | PDF 593.8 KB |
| Test Report (DFS) rev | Test Report | 2024-05-17 | PDF 713.9 KB |
| Test Report (DTS-BT LE) rev | Test Report | 2024-05-17 | PDF 1.7 MB |
| Test Report (DTS-WLAN) rev | Test Report | 2024-05-17 | PDF 4 MB |
| Test Report (NII) rev 2 | Test Report | 2024-05-17 | PDF 5.4 MB |
| Attestation (Statements of part 2.911(d)(5)) | Attestation Statements | 2025-01-14 | PDF 35.3 KB |
| Attestation (U.S. local Agent Letter) rev 2 | Attestation Statements | 2025-01-14 | PDF 908.2 KB |
| Attestation (Channel and Mode Declaration) | Attestation Statements | 2024-05-17 | PDF 42.3 KB |
| Attestation (DFS Client Declaration) | Attestation Statements | 2024-05-17 | PDF 58.5 KB |
| Attestation (Statements of part 2.911(d)(5)) | Attestation Statements | 2024-05-17 | PDF 67.9 KB |
| Attestation (U.S. local Agent Letter) | Attestation Statements | 2024-05-17 | PDF 144.9 KB |
| Cover Letter (Agent Authorization) | Cover Letter(s) | 2025-01-14 | PDF 38.8 KB |
| Cover Letter (Description of Change) | Cover Letter(s) | 2025-01-14 | PDF 97.6 KB |
| Confidentiality Request (Long term) rev | Cover Letter(s) | 2024-05-17 | PDF 75.6 KB |
| Confidentiality Request (Short term) | Cover Letter(s) | 2024-05-17 | PDF 30.1 KB |
| Cover Letter (Agent Authorization) | Cover Letter(s) | 2024-05-17 | PDF 70.8 KB |
| Cover Letter (Modular Approval Request) | Cover Letter(s) | 2024-05-17 | PDF 109.5 KB |
| RF Exposure Info (MPE) | RF Exposure Info | 2025-01-14 | PDF 311.6 KB |
| RF Exposure Info (MPE) | RF Exposure Info | 2024-05-17 | PDF 310.7 KB |
| Block Diagram Metadata only | Block Diagram | PDF 154.4 KB | |
| Schematics Metadata only | Schematics | PDF 506.7 KB | |
| Operational Description rev Metadata only | Operational Description | PDF 213.2 KB | |
| Software Operational Description rev Metadata only | Operational Description | PDF 178.6 KB | |
| Parts List rev Metadata only | Parts List/Tune Up Info | PDF 32.2 KB |
Application Information
| Application ID | VK8HHoalDvDDbgVu0XWfVg== |
|---|---|
| Final Action Date | 2025-01-14 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013616305 |
| Model | IM100 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Embedded wireless module |
| Responsible Party | Yukinari Shibuya, Manager, shibuya@silex.jp  , +81-774-98-3878 |
| Agent | Emerald Emerald Emerald, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, emerald.chen@bureauveritas.com  , 88633183232 |
| Test Firm | Ken Liu, Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch Hsin, ken.liu@bureauveritas.com , +886-3-2600609 |
| TCB Email | certification@nacsemc.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC for lowering the power setting for 2.4GHz WiFi via software change as described in this filing. Power listed is maximum conducted output power. This device supports 20 MHz bandwidth mode for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used when installed in a host device that follows the required instructions for use of a trace reference design. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| VK8HHoalDvDDbgVu0XWfVg== | 2025-01-14 | Class II permissive change or modification of presently authorized equipment |
| iYYHKBJB2ZEBuzHQhkpUXw== | 2024-05-17 | Original Equipment |
| Kuh4/vICjR2mu+XvzJOeuA== | 2024-05-17 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application VK8HHoalDvDDbgVu0XWfVg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 01/14/2025 Application Dated: 01/09/2025 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yukinari Shibuya , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-IM100 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Embedded wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.132 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| C2PC for lowering the power setting for 2.4GHz WiFi via software change as described in this filing. Power listed is maximum conducted output power. This device supports 20 MHz bandwidth mode for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used when installed in a host device that follows the required instructions for use of a trace reference design. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application VK8HHoalDvDDbgVu0XWfVg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 01/14/2025 Application Dated: 01/09/2025 |
| Attention: Yukinari Shibuya , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-IM100 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Embedded wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.132 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| C2PC for lowering the power setting for 2.4GHz WiFi via software change as described in this filing. Power listed is maximum conducted output power. This device supports 20 MHz bandwidth mode for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used when installed in a host device that follows the required instructions for use of a trace reference design. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 05/17/2024 Application Dated: 05/17/2024 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yukinari Shibuya , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-IM100 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Embedded wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.048 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.048 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.048 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.049 |
| Power listed is maximum conducted output power. This device supports 20 MHz bandwidth mode. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used when installed in a host device that follows the required instructions for use of a trace reference design. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application Kuh4/vICjR2mu+XvzJOeuA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 05/17/2024 Application Dated: 05/17/2024 |
| Attention: Yukinari Shibuya , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-IM100 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Embedded wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.048 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.048 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.048 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.049 |
| Power listed is maximum conducted output power. This device supports 20 MHz bandwidth mode. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used when installed in a host device that follows the required instructions for use of a trace reference design. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 05/17/2024 Application Dated: 05/17/2024 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yukinari Shibuya , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-IM100 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Embedded wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.157 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| Power listed is maximum conducted output power. This device supports 20 MHz bandwidth mode for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used when installed in a host device that follows the required instructions for use of a trace reference design. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application iYYHKBJB2ZEBuzHQhkpUXw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 05/17/2024 Application Dated: 05/17/2024 |
| Attention: Yukinari Shibuya , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-IM100 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Embedded wireless module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.157 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| Power listed is maximum conducted output power. This device supports 20 MHz bandwidth mode for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used when installed in a host device that follows the required instructions for use of a trace reference design. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |