FCC ID N6C-PCEAXAP
Module
by Silex Technology, Inc.
Grantee Code: N6C Product Code: PCEAXAP
Latest application date: 2024-09-23
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5250 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-23 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-23 |
| 2412-2462 MHz | Original Equipment | 2024-02-29 |
| 5180-5250 MHz | Original Equipment | 2024-02-29 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2024-08-27 | PDF 305.9 KB |
| Inernal Photos | Internal Photos | 2025-03-20 | PDF 130.4 KB |
| Internal photos | Internal Photos | 2025-03-20 | PDF 130.4 KB |
| Internal Photos | Internal Photos | 2024-08-27 | PDF 1.4 MB |
| Exterhal Photos | External Photos | 2025-03-20 | PDF 220.1 KB |
| External photos | External Photos | 2025-03-20 | PDF 220.1 KB |
| External Photos | External Photos | 2024-08-27 | PDF 1.2 MB |
| Label | ID Label/Location Info | 2024-02-29 | PDF 158.3 KB |
| Label Location | ID Label/Location Info | 2024-02-29 | PDF 158.3 KB |
| Test setup photos | Test Setup Photos | 2025-03-20 | PDF 707.9 KB |
| TSUP | Test Setup Photos | 2024-08-27 | PDF 1.2 MB |
| 2.4GHz FCC C2PC test report | Test Report | 2024-09-23 | PDF 1.3 MB |
| 5GHz FCC C2PC test report | Test Report | 2024-09-23 | PDF 3.1 MB |
| Antenna specification - 1399.17.0224 | Test Report | 2024-09-23 | PDF 808.5 KB |
| Antenna specification - 2JF0188P | Test Report | 2024-09-23 | PDF 657.1 KB |
| Test Report DFS | Test Report | 2024-02-29 | PDF 5.6 MB |
| Test Report Silex Original 6E | Test Report | 2024-02-29 | PDF 726.3 KB |
| Test Report WLAN 2.4G Part 1 | Test Report | 2024-02-29 | PDF 5.2 MB |
| Test Report WLAN 2.4G Part 2 | Test Report | 2024-02-29 | PDF 5.4 MB |
| Test Report WLAN 5G Part 1 | Test Report | 2024-02-29 | PDF 5.3 MB |
| Test Report WLAN 5G Part 2 | Test Report | 2024-02-29 | PDF 5.3 MB |
| Test Report WLAN 5G Part 3 | Test Report | 2024-02-29 | PDF 5.2 MB |
| Test Report WLAN 5G Part 4 | Test Report | 2024-02-29 | PDF 5.2 MB |
| Test Report WLAN 5G Part 5 | Test Report | 2024-02-29 | PDF 4.2 MB |
| WiFi Dual Band PCB Antenna | Test Report | 2024-02-29 | PDF 2.6 MB |
| FCC_Attestation_Statements_Letter_1 | Attestation Statements | 2024-09-23 | PDF 271.1 KB |
| FCC_Attestation_Statements_Letter_2 | Attestation Statements | 2024-09-23 | PDF 254.4 KB |
| FCC_US_Agent_for_Service | Attestation Statements | 2024-09-23 | PDF 461.4 KB |
| US Agent For Service of Process | Attestation Statements | 2024-09-23 | PDF 461.4 KB |
| Attestation Statements Part 2.911(d)(7) | Attestation Statements | 2024-02-29 | PDF 587.2 KB |
| Attstn Stmt part 2.911(d)(5)(i)&(ii) | Attestation Statements | 2024-02-29 | PDF 30.5 KB |
| FCC Agent authorization letter | Cover Letter(s) | 2024-09-23 | PDF 421.3 KB |
| FCC C2PC request letter | Cover Letter(s) | 2024-09-23 | PDF 328.2 KB |
| FCC Confidentiality Request Letter | Cover Letter(s) | 2024-09-23 | PDF 594.7 KB |
| FCC agent authorization letter | Cover Letter(s) | 2024-09-23 | PDF 421.3 KB |
| FCC confidentiality request letter | Cover Letter(s) | 2024-09-23 | PDF 594.7 KB |
| Confidentiality Letter | Cover Letter(s) | 2024-02-29 | PDF 73.9 KB |
| LOA Letter | Cover Letter(s) | 2024-02-29 | PDF 36 KB |
| Modular Approval Letter | Cover Letter(s) | 2024-02-29 | PDF 105.8 KB |
| WIFI Declaration Letter | Cover Letter(s) | 2024-02-29 | PDF 35.9 KB |
| RF exposure info | RF Exposure Info | 2024-09-23 | PDF 372.7 KB |
| RF Exposure MPE | RF Exposure Info | 2024-02-29 | PDF 474.9 KB |
| Block Diagram Metadata only | Block Diagram | PDF 156.5 KB | |
| Schematics Metadata only | Schematics | PDF 4.5 MB | |
| Operational Description Metadata only | Operational Description | PDF 948 KB | |
| Op Desc Software Security Metadata only | SDR Software/Security Info. | PDF 239.3 KB |
Application Information
| Application ID | 3N8xu/wJkkCUQyg7aZSr7g== |
|---|---|
| Final Action Date | 2024-09-23 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013616305 |
| Model | PCEAXAP |
| Frequency Range | 5180-5250 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Module |
| Responsible Party | Yukinari Shibuya, Manager, shibuya@silex.jp  , +81-774-98-3878 |
| Test Firm | David Zhang, Vista Laboratories, Inc., info@vista-compliance.com  , 9494647589 |
| TCB Email | cb@vista-compliance.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/20/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add two specific antennas, described in the filing (2J Antenna Part No.: 2JF0188P-2.4 and Huber+Suhner Part No.: 1399.17.0224). The Huber+Suhner antenna (Part No.: 1399.17.0224) requires professional installation to meet 15.203 requirements. Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20, 40, 80 and 160 MHz modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 3N8xu/wJkkCUQyg7aZSr7g== | 2024-09-23 | Class II permissive change or modification of presently authorized equipment |
| +R7JBG9V1ebqIFv1uu+XmA== | 2024-09-23 | Class II permissive change or modification of presently authorized equipment |
| phg7+8a4zrui7D2+PHQDVw== | 2024-02-29 | Original Equipment |
| 9zTF13/9BZ4SDgZRBIT/zQ== | 2024-02-29 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application phg7+8a4zrui7D2+PHQDVw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/29/2024 Application Dated: 02/26/2024 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-PCEAXAP |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.505 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application phg7+8a4zrui7D2+PHQDVw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 02/29/2024 Application Dated: 02/26/2024 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-PCEAXAP |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.505 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/29/2024 Application Dated: 02/26/2024 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-PCEAXAP |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.087 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.089 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.089 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.085 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20, 40, 80 and 160 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 9zTF13/9BZ4SDgZRBIT/zQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 02/29/2024 Application Dated: 02/26/2024 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-PCEAXAP |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.087 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.089 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.089 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.085 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20, 40, 80 and 160 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Vista Laboratories, Inc. 1261 Puerta Del Sol San Clemente, CA 92673 |
Date of Grant: 09/23/2024 Application Dated: 09/23/2024 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yukinari Shibuya , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-PCEAXAP |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.087 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.089 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.089 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.085 |
| Class II Permissive Change to add two specific antennas, described in the filing (2J Antenna Part No.: 2JF0188P-2.4 and Huber+Suhner Part No.: 1399.17.0224). The Huber+Suhner antenna (Part No.: 1399.17.0224) requires professional installation to meet 15.203 requirements. Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20, 40, 80 and 160 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 3N8xu/wJkkCUQyg7aZSr7g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 09/23/2024 Application Dated: 09/23/2024 |
| Attention: Yukinari Shibuya , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-PCEAXAP |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.087 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.089 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.089 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.085 |
| Class II Permissive Change to add two specific antennas, described in the filing (2J Antenna Part No.: 2JF0188P-2.4 and Huber+Suhner Part No.: 1399.17.0224). The Huber+Suhner antenna (Part No.: 1399.17.0224) requires professional installation to meet 15.203 requirements. Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20, 40, 80 and 160 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Vista Laboratories, Inc. 1261 Puerta Del Sol San Clemente, CA 92673 |
Date of Grant: 09/23/2024 Application Dated: 09/23/2024 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yukinari Shibuya , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-PCEAXAP |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.505 |
| Class II Permissive Change to add two specific antennas, described in the filing (2J Antenna Part No.: 2JF0188P-2.4 and Huber+Suhner Part No.: 1399.17.0224). The Huber+Suhner antenna (Part No.: 1399.17.0224) requires professional installation to meet 15.203 requirements. Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application +R7JBG9V1ebqIFv1uu+XmA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 09/23/2024 Application Dated: 09/23/2024 |
| Attention: Yukinari Shibuya , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-PCEAXAP |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.505 |
| Class II Permissive Change to add two specific antennas, described in the filing (2J Antenna Part No.: 2JF0188P-2.4 and Huber+Suhner Part No.: 1399.17.0224). The Huber+Suhner antenna (Part No.: 1399.17.0224) requires professional installation to meet 15.203 requirements. Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |