FCC ID N6C-PFSDMGN
SDIO Wireless Module
by Silex Technology, Inc.
Grantee Code: N6C Product Code: PFSDMGN
Latest application date: 2013-12-13
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2013-12-13 |
| 2412-2462 MHz | Original Equipment | 2012-07-04 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| (Short-term Confidential)_Users Manual PF-SDMGN 20120625 | Users Manual | 2012-12-31 | PDF 237.1 KB |
| (Short-term Confidential)_Photograph | Internal Photos | 2012-12-31 | PDF 2.8 MB |
| (Short-term Confidential)_Photograph | External Photos | 2012-12-31 | PDF 2.8 MB |
| Label&Location | ID Label/Location Info | 2012-07-04 | PDF 47 KB |
| FCC test setup photo | Test Setup Photos | 2013-12-13 | PDF 2 MB |
| (Short-term Confidential)_FCC test setup photo-R1 | Test Setup Photos | 2012-12-31 | PDF 518.4 KB |
| FCC report | Test Report | 2013-12-13 | PDF 654.5 KB |
| FCC report-R1 | Test Report | 2012-07-04 | PDF 1 MB |
| FCC Authorization Letter | Cover Letter(s) | 2013-12-13 | PDF 61 KB |
| FCC Class II Permissive Change Letter | Cover Letter(s) | 2013-12-13 | PDF 59.6 KB |
| FCC MA Letter | Cover Letter(s) | 2013-12-13 | PDF 125.4 KB |
| FCC Request for Confidentiality Letter | Cover Letter(s) | 2013-12-13 | PDF 50.3 KB |
| Agent Letter | Cover Letter(s) | 2012-07-04 | PDF 27 KB |
| FCC MA letter | Cover Letter(s) | 2012-07-04 | PDF 61.5 KB |
| Request Confidentially Letter | Cover Letter(s) | 2012-07-04 | PDF 23.3 KB |
| Request Short-term Confidentially Letter | Cover Letter(s) | 2012-07-04 | PDF 24.8 KB |
| RF Exposure | RF Exposure Info | 2013-12-13 | PDF 59.4 KB |
| RF Exposure | RF Exposure Info | 2012-07-04 | PDF 55.2 KB |
Application Information
| Application ID | svMzllq5b9CFFjaQ23d7nA== |
|---|---|
| Final Action Date | 2013-12-13 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013616305 |
| Model | -PFSDMGN |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | SDIO Wireless Module |
| Responsible Party | Toshiro Kometani, Manager, kometani@silex.jp  , 81 774-98-3781 |
| Agent | Yoshinobu Yoshinobu Yoshinobu, UL Japan, Inc., Yoshinobu.Asai@ul.com  , 81-596-24-8116 |
| Technical Contact | Takahiro Hatakeda, UL Japan, Inc., Takahiro.Hatakeda@ul.com , 81-596-24-8999 |
| Test Firm | Tetsuya Hashimoto, UL Japan, Inc. Head office EMC Lab., Tetsuya.Hashimoto@jp.ul.com  , 81-596-24-8116 |
| TCB Email | emc.jp@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| svMzllq5b9CFFjaQ23d7nA== | 2013-12-13 | Class II permissive change or modification of presently authorized equipment |
| 0P26/3Vf3XTNGWesCJ2I+Q== | 2012-07-04 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.1947000 | 15C |
Grants
TCB Grant - Application svMzllq5b9CFFjaQ23d7nA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 12/13/2013 Application Dated: 12/13/2013 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai,Seika-cho Sourakugun |
| Kyoto, 619-0237 Japan |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-PFSDMGN |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1947 |
| Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
EAS Grant - Application svMzllq5b9CFFjaQ23d7nA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai,Seika-cho Sourakugun Kyoto, 619-0237 Japan |
Date of Grant: 12/13/2013 Application Dated: 12/13/2013 |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-PFSDMGN |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1947 |
| Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 07/04/2012 Application Dated: 07/04/2012 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai,Seika-cho Sourakugun |
| Kyoto, 619-0237 Japan |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-PFSDMGN |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1947 |
| Single Modular Approval. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
EAS Grant - Application 0P26/3Vf3XTNGWesCJ2I+Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai,Seika-cho Sourakugun Kyoto, 619-0237 Japan |
Date of Grant: 07/04/2012 Application Dated: 07/04/2012 |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-PFSDMGN |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1947 |
| Single Modular Approval. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| Mail To: |