FCC ID N6C-SDMAX
Wireless Embedded Module
by Silex Technology, Inc.
Grantee Code: N6C Product Code: SDMAX
Latest application date: 2025-05-06
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2025-05-06 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2025-05-06 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-05-02 |
| 2402-2480 MHz | Original Equipment | 2023-05-22 |
| 5180-5240 MHz | Original Equipment | 2023-05-22 |
| 2402-2480 MHz | Original Equipment | 2023-05-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual rev2 | Users Manual | 2024-05-02 | PDF 330.1 KB |
| Users Manual | Users Manual | 2023-08-01 | PDF 207.8 KB |
| Internal Photos | Internal Photos | 2024-05-02 | PDF 289.1 KB |
| Internal photos | Internal Photos | 2023-08-01 | PDF 419.5 KB |
| External Photo | External Photos | 2025-11-01 | PDF 192 KB |
| External Photos rev | External Photos | 2024-05-02 | PDF 1 MB |
| External photos | External Photos | 2023-08-01 | PDF 665.2 KB |
| Label Sample & Label Location | ID Label/Location Info | 2023-05-22 | PDF 25.9 KB |
| Label Sample and Label Location | ID Label/Location Info | 2023-05-22 | PDF 25.9 KB |
| Test Setup photo | Test Setup Photos | 2025-11-01 | PDF 280.9 KB |
| Test Set Up Photos (DFS) | Test Setup Photos | 2024-05-02 | PDF 116.1 KB |
| Test Set Up Photos rev | Test Setup Photos | 2024-05-02 | PDF 897.3 KB |
| Test setup photos | Test Setup Photos | 2023-08-01 | PDF 1.3 MB |
| Test setup photos (DFS) | Test Setup Photos | 2023-08-01 | PDF 114.2 KB |
| Antenna specification | Test Report | 2025-05-06 | PDF 3.7 MB |
| DFS test report | Test Report | 2025-05-06 | PDF 3.2 MB |
| RF exposure info Metadata only | Test Report | 2025-05-06 | PDF 420 KB |
| Test report | Test Report | 2025-05-06 | PDF 2.8 MB |
| Test report | Test Report | 2025-05-06 | PDF 1.5 MB |
| Antenna Datasheet | Test Report | 2024-05-02 | PDF 2 MB |
| Test Report (DFS) rev | Test Report | 2024-05-02 | PDF 749.3 KB |
| Test Report (NII) rev | Test Report | 2024-05-02 | PDF 5.8 MB |
| Antenna Datasheet | Test Report | 2023-05-22 | PDF 1.7 MB |
| Test report (DTS-WLAN) rev2 | Test Report | 2023-05-22 | PDF 4 MB |
| Test report (DFS) | Test Report | 2023-05-22 | PDF 1.1 MB |
| Test report (DSS) rev | Test Report | 2023-05-22 | PDF 1.5 MB |
| Test report (DTS-BTLE) rev2 | Test Report | 2023-05-22 | PDF 1.7 MB |
| Test report (NII-part 1) rev3 | Test Report | 2023-05-22 | PDF 1.9 MB |
| Test report (NII-part 2) rev3 | Test Report | 2023-05-22 | PDF 2.8 MB |
| Test report (NII-part 3) rev3 | Test Report | 2023-05-22 | PDF 2.8 MB |
| Test report (NII-part 4) rev3 | Test Report | 2023-05-22 | PDF 2.3 MB |
| Test report (NII-part 5) rev3 | Test Report | 2023-05-22 | PDF 1.6 MB |
| Test report (NII-part 6) rev3 | Test Report | 2023-05-22 | PDF 1.1 MB |
| FCC_Attestation_Statements_Letter_1 | Attestation Statements | 2025-05-06 | PDF 39.3 KB |
| FCC_Attestation_Statements_Letter_2 | Attestation Statements | 2025-05-06 | PDF 39 KB |
| US Agent For Service of Process | Attestation Statements | 2025-05-06 | PDF 67.5 KB |
| Attestation (Statements of part 2.911(d)(5)) rev | Attestation Statements | 2024-05-02 | PDF 37.4 KB |
| Attestation (U.S. local Agent Letter) rev | Attestation Statements | 2024-05-02 | PDF 144.9 KB |
| Attestation (Channel and Mode Declaration) | Attestation Statements | 2023-05-22 | PDF 25.5 KB |
| Attestation (DFS Client Declaration) | Attestation Statements | 2023-05-22 | PDF 115.7 KB |
| Attestation-Statements of part 2.911(d)(5) | Attestation Statements | 2023-05-22 | PDF 43.7 KB |
| Attestation-U.S. local Agent Letter of part 2.911(d)(7) | Attestation Statements | 2023-05-22 | PDF 93.1 KB |
| Agent authorization letter | Cover Letter(s) | 2025-05-06 | PDF 50.7 KB |
| C2PC Request Letter | Cover Letter(s) | 2025-05-06 | PDF 32.8 KB |
| FCC Confidentiality Request Letter | Cover Letter(s) | 2025-05-06 | PDF 60.9 KB |
| Confidentiality Request rev | Cover Letter(s) | 2024-05-02 | PDF 37.3 KB |
| Cover Letter (Agent Authorization) rev | Cover Letter(s) | 2024-05-02 | PDF 37.3 KB |
| Cover Letter (Description of Change) rev | Cover Letter(s) | 2024-05-02 | PDF 158.1 KB |
| Confidentiality Request (Long term ) | Cover Letter(s) | 2023-05-22 | PDF 42.1 KB |
| Confidentiality Request (Short term) | Cover Letter(s) | 2023-05-22 | PDF 32.3 KB |
| Confidentiality request (Short term) | Cover Letter(s) | 2023-05-22 | PDF 32.3 KB |
| Cover Letter (Agent Authorization) | Cover Letter(s) | 2023-05-22 | PDF 42 KB |
| Cover Letter (Modular Approval Request) | Cover Letter(s) | 2023-05-22 | PDF 128.9 KB |
| RF Exposure Info | RF Exposure Info | 2025-05-06 | PDF 420 KB |
| RF exposure info | RF Exposure Info | 2025-05-06 | PDF 420 KB |
| RF Exposure Info (MPE) | RF Exposure Info | 2024-05-02 | PDF 301.1 KB |
| RF Exposure Info (MPE) rev | RF Exposure Info | 2023-05-22 | PDF 510.7 KB |
| Block diagram Metadata only | Block Diagram | PDF 268.1 KB | |
| Schematics Metadata only | Schematics | PDF 649.6 KB | |
| Operational Description Metadata only | Operational Description | PDF 197.9 KB | |
| Operational Description Metadata only | Operational Description | PDF 237.1 KB | |
| Software Operational Description Metadata only | Operational Description | PDF 186.8 KB |
Application Information
| Application ID | 44Y6kXJ3za52PE2rEQvOfA== |
|---|---|
| Final Action Date | 2025-05-06 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013616305 |
| Model | SDMAX |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Wireless Embedded Module |
| Responsible Party | Yukinari Shibuya, Manager, shibuya@silex.jp  , +81-774-98-3878 |
| Test Firm | David Zhang, Vista Laboratories, Inc., info@vista-compliance.com  , 9494647589 |
| TCB Email | cb@vista-compiance.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 11/01/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add specific antennas, described in the filing (PANOPRAMA ANTENNAS, Model: LG-IN2929). Power listed is maximum conducted output power. This device supports 20/40/80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 44Y6kXJ3za52PE2rEQvOfA== | 2025-05-06 | Class II permissive change or modification of presently authorized equipment |
| 3BBhJY4oEDryBLNFdc7YMg== | 2025-05-06 | Class II permissive change or modification of presently authorized equipment |
| wD7//UGbQXisb6iLYzxehA== | 2024-05-02 | Class II permissive change or modification of presently authorized equipment |
| Y8EEZUMRKJ54H57L0xRwtw== | 2023-05-22 | Original Equipment |
| RGzvUN2y0jP8XKxcSpk8eg== | 2023-05-22 | Original Equipment |
| Q8h9356tWPSwk0Hjimu6sg== | 2023-05-22 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.002 | 15C | CC |
| 2402-2480 MHz | 0.0080000 | 15C | CC |
| 2412-2462 MHz | 0.2270000 | CC | |
| 2412-2462 MHz | 0.227 | 15C | CC |
| 5180-5240 MHz | 0.044 | 15E | CC |
| 5180-5240 MHz | 0.044 | CC | |
| 5260-5320 MHz | 0.044 | 15E | CC, ND |
| 5260-5320 MHz | 0.044 | CC, ND | |
| 5500-5720 MHz | 0.044 | 15E | CC, ND |
| 5500-5720 MHz | 0.044 | CC, ND | |
| 5745-5825 MHz | 0.044 | 15E | CC |
| 5745-5825 MHz | 0.044 | CC |
Grants
TCB Grant - Application Y8EEZUMRKJ54H57L0xRwtw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 05/22/2023 Application Dated: 05/22/2023 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Embedded Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 |
| Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Y8EEZUMRKJ54H57L0xRwtw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 05/22/2023 Application Dated: 05/22/2023 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Embedded Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 |
| Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 05/02/2024 Application Dated: 05/02/2024 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yukinari Shibuya , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Embedded Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.044 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.044 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.044 |
| C2PC for adding new antenna models and updating firmware as described in this filing. Power listed is maximum conducted output power. This device supports 20/40/80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application wD7//UGbQXisb6iLYzxehA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 05/02/2024 Application Dated: 05/02/2024 |
| Attention: Yukinari Shibuya , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Embedded Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.044 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.044 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.044 |
| C2PC for adding new antenna models and updating firmware as described in this filing. Power listed is maximum conducted output power. This device supports 20/40/80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 05/22/2023 Application Dated: 05/22/2023 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Embedded Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.044 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.044 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.044 |
| Power listed is maximum conducted output power. This device supports 20/40/80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application RGzvUN2y0jP8XKxcSpk8eg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 05/22/2023 Application Dated: 05/22/2023 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Embedded Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.044 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.044 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.044 |
| Power listed is maximum conducted output power. This device supports 20/40/80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 05/22/2023 Application Dated: 05/22/2023 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Embedded Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.227 |
| Power listed is maximum conducted output power. This device supports 20/40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Q8h9356tWPSwk0Hjimu6sg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 05/22/2023 Application Dated: 05/22/2023 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Embedded Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.227 |
| Power listed is maximum conducted output power. This device supports 20/40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Vista Laboratories, Inc. 1261 Puerta Del Sol San Clemente, CA 92673 |
Date of Grant: 05/06/2025 Application Dated: 05/06/2025 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yukinari Shibuya , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Embedded Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.044 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.044 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.044 |
| Class II Permissive Change to add specific antennas, described in the filing (PANOPRAMA ANTENNAS, Model: LG-IN2929); firmware is modified to enable function of DFS master Radar Detection. Power listed is maximum conducted output power. This device supports 20/40/80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
TCB Grant - Application 3BBhJY4oEDryBLNFdc7YMg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Vista Laboratories, Inc. 1261 Puerta Del Sol San Clemente, CA 92673 |
Date of Grant: 05/06/2025 Application Dated: 05/06/2025 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yukinari Shibuya , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Embedded Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.227 |
| Class II Permissive Change to add two specific antennas, described in the filing (PANOPRAMA ANTENNAS, Model: LG-IN2929); and firmware is modified to enable function of DFS master Radar Detection. Power listed is maximum conducted output power. This device supports 20/40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |