FCC ID N6C-SDPAC
802.11a/b/g/n/ac+BT4.1 module
by Silex Technology, Inc.
Grantee Code: N6C Product Code: SDPAC
Latest application date: 2017-11-20
Device Images
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2017-11-20 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2017-11-20 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2017-11-20 |
| 2402-2480 MHz | Original Equipment | 2016-08-18 |
| 5180-5240 MHz | Original Equipment | 2016-08-18 |
| 2402-2480 MHz | Original Equipment | 2016-08-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2016-08-18 | PDF 218.2 KB |
| Internal Photos | Internal Photos | 2016-08-18 | PDF 718.6 KB |
| Module Photos | External Photos | 2017-11-20 | PDF 167.6 KB |
| External Photos | External Photos | 2016-08-18 | PDF 210.1 KB |
| Label | ID Label/Location Info | 2016-08-18 | PDF 189.9 KB |
| Label and Location | ID Label/Location Info | 2016-08-18 | PDF 510.5 KB |
| Test Setup Photos | Test Setup Photos | 2017-11-20 | PDF 308.9 KB |
| Test Setup Photos | Test Setup Photos | 2016-08-18 | PDF 234.3 KB |
| DSS Test Report | Test Report | 2017-11-20 | PDF 1.5 MB |
| DTS BLE Test Report | Test Report | 2017-11-20 | PDF 1.4 MB |
| DTS WIFI Test Report | Test Report | 2017-11-20 | PDF 1.9 MB |
| NII Test Report | Test Report | 2017-11-20 | PDF 1.6 MB |
| DSS RF Test Report 1 | Test Report | 2016-08-18 | PDF 4.5 MB |
| DTS RF Test Report | Test Report | 2016-08-18 | PDF 2.9 MB |
| Test Report NII B1 B3 | Test Report | 2016-08-18 | PDF 3.1 MB |
| Test Report NII B2 | Test Report | 2016-08-18 | PDF 3.9 MB |
| DFS Disabled Attestation Letter | Cover Letter(s) | 2017-11-20 | PDF 143.2 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2017-11-20 | PDF 286.9 KB |
| Product Certification Representative Auth Letter | Cover Letter(s) | 2017-11-20 | PDF 333.1 KB |
| Confidentiality Letter | Cover Letter(s) | 2016-08-18 | PDF 328.5 KB |
| Modular Approval Letter | Cover Letter(s) | 2016-08-18 | PDF 631.9 KB |
| Modular Approval Request Letter | Cover Letter(s) | 2016-08-18 | PDF 631.9 KB |
| Product Certification Rep Auth Letter | Cover Letter(s) | 2016-08-18 | PDF 303.2 KB |
| Wi-FI band 12-13 Declaration Letter | Cover Letter(s) | 2016-08-18 | PDF 489.7 KB |
| MPE Calculation | RF Exposure Info | 2017-11-20 | PDF 96.4 KB |
| MPE Calculation | RF Exposure Info | 2016-08-18 | PDF 100 KB |
| Block Diagram Metadata only | Block Diagram | PDF 76.8 KB | |
| Schematics Metadata only | Schematics | PDF 264.3 KB | |
| Operational Description Metadata only | Operational Description | PDF 85.4 KB | |
| Software Security Description Metadata only | Operational Description | PDF 119.2 KB |
Application Information
| Application ID | OSsf1+if038FY9s9+yt3SA== |
|---|---|
| Final Action Date | 2017-11-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013616305 |
| Model | SDPAC |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 802.11a/b/g/n/ac+BT4.1 module |
| Responsible Party | Yoshinori Nakai, General Manager, nakai@silex.jp  , 81 774-98-3781 |
| Test Firm | Sarb Shelopal, Bureau Veritas Consumer Products Services, Inc., Sarbjit.Shelopal@bureauveritas.com  , +1 925 963 4420 |
| TCB Email | tcb@siemic.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC to change the SX-SDPAC u.Fl connector with Johanson Chip Antenna Original grant comment: Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| OSsf1+if038FY9s9+yt3SA== | 2017-11-20 | Class II permissive change or modification of presently authorized equipment |
| IYiZKCyoglrmcGcBdwyvQw== | 2017-11-20 | Class II permissive change or modification of presently authorized equipment |
| IFPWJhA51SEYCR22fxA3AA== | 2017-11-20 | Class II permissive change or modification of presently authorized equipment |
| sJ9lhWXZLXXWq1qSvjiPGA== | 2016-08-18 | Original Equipment |
| UoK9E8jrMHAPX6PY5Blnkg== | 2016-08-18 | Original Equipment |
| OjOGCG7dFeYKqUN8mZWFCA== | 2016-08-18 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.001 | 15C | CC |
| 2402-2480 MHz | 0.0080000 | 15C | CC |
| 2412-2462 MHz | 0.061 | 15C | CC |
| 2412-2462 MHz | 0.06 | 15C | CC |
| 5180-5240 MHz | 0.081 | 15E | 38, CC |
| 5180-5240 MHz | 0.025 | 15E | 38, CC |
| 5260-5320 MHz | 0.021 | 15E | 38, CC, ND |
| 5500-5700 MHz | 0.026 | 15E | 38, CC, ND |
| 5500-5700 MHz | 0.028 | 15E | 38, CC, ND |
| 5745-5825 MHz | 0.032 | 15E | 38, CC |
Grants
TCB Grant - Application UoK9E8jrMHAPX6PY5Blnkg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 08/18/2016 Application Dated: 08/18/2016 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDPAC |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n/ac + BT4.1 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.025 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.021 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.028 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.032 |
| Single Modular Approval. Output power listed is Conducted. Operation in 5.15-5.25 GHz band is for indoor use only. For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. This device has a 20 / 40 / 80 MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application UoK9E8jrMHAPX6PY5Blnkg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 08/18/2016 Application Dated: 08/18/2016 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDPAC |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n/ac + BT4.1 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.025 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.021 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.028 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.032 |
| Single Modular Approval. Output power listed is Conducted. Operation in 5.15-5.25 GHz band is for indoor use only. For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. This device has a 20 / 40 / 80 MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 08/18/2016 Application Dated: 08/18/2016 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDPAC |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n/ac + BT4.1 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 |
| Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application sJ9lhWXZLXXWq1qSvjiPGA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 08/18/2016 Application Dated: 08/18/2016 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDPAC |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n/ac + BT4.1 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 |
| Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 11/20/2017 Application Dated: 11/17/2017 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDPAC |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n/ac+BT4.1 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 |
| C2PC to change the SX-SDPAC u.Fl connector with Johanson Chip Antenna Original grant comment: Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application OSsf1+if038FY9s9+yt3SA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 11/20/2017 Application Dated: 11/17/2017 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDPAC |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n/ac+BT4.1 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 |
| C2PC to change the SX-SDPAC u.Fl connector with Johanson Chip Antenna Original grant comment: Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 08/18/2016 Application Dated: 08/18/2016 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDPAC |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n/ac + BT4.1 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.06 |
| Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device has a 20 MHz, 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application OjOGCG7dFeYKqUN8mZWFCA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 08/18/2016 Application Dated: 08/18/2016 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDPAC |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n/ac + BT4.1 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.06 |
| Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device has a 20 MHz, 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 11/20/2017 Application Dated: 11/20/2017 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDPAC |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n/ac+BT4.1 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.061 |
| C2PC to change the SX-SDPAC u.Fl connector with Johanson Chip Antenna Original grant comment: Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application IYiZKCyoglrmcGcBdwyvQw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 11/20/2017 Application Dated: 11/20/2017 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDPAC |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n/ac+BT4.1 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.061 |
| C2PC to change the SX-SDPAC u.Fl connector with Johanson Chip Antenna Original grant comment: Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 11/20/2017 Application Dated: 11/20/2017 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDPAC |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n/ac+BT4.1 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.081 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.021 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.026 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.032 |
| C2PC to change the SX-SDPAC u.Fl connector with Johanson Chip Antenna Original grant comment: Single Modular Approval. Output power listed is Conducted. Operation in 5.15-5.25 GHz band is for indoor use only. For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. This device has a 20 / 40 / 80 MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application IFPWJhA51SEYCR22fxA3AA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 11/20/2017 Application Dated: 11/20/2017 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDPAC |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n/ac+BT4.1 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.081 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.021 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.026 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.032 |
| C2PC to change the SX-SDPAC u.Fl connector with Johanson Chip Antenna Original grant comment: Single Modular Approval. Output power listed is Conducted. Operation in 5.15-5.25 GHz band is for indoor use only. For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. This device has a 20 / 40 / 80 MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |