FCC ID N6C-SX10WAG
SX-10WAG
by Silex Technology, Inc.
Grantee Code: N6C Product Code: SX10WAG
Latest application date: 2008-03-04
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2008-03-04 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2008-03-04 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2007-10-14 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2007-10-14 |
| 5180-5320 MHz | Original Equipment | 2006-07-17 |
| 2412-2462 MHz | Original Equipment | 2006-07-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual 1 | Users Manual | 2007-11-28 | PDF 53.8 KB |
| Manual 10 | Users Manual | 2007-11-28 | PDF 1.9 MB |
| Manual 2 | Users Manual | 2007-11-28 | PDF 1.5 MB |
| Manual 3 | Users Manual | 2007-11-28 | PDF 1.7 MB |
| Manual 4 | Users Manual | 2007-11-28 | PDF 1.7 MB |
| Manual 5 | Users Manual | 2007-11-28 | PDF 2.2 MB |
| Manual 6 | Users Manual | 2007-11-28 | PDF 2 MB |
| Manual 7 | Users Manual | 2007-11-28 | PDF 1.8 MB |
| Manual 8 | Users Manual | 2007-11-28 | PDF 1.2 MB |
| Manual 9 | Users Manual | 2007-11-28 | PDF 2.3 MB |
| Manual | Users Manual | 2006-07-17 | PDF 50.3 KB |
| Internal photos | Internal Photos | 2006-07-17 | PDF 964 KB |
| External photos | External Photos | 2007-11-28 | PDF 964.9 KB |
| External photos | External Photos | 2006-07-17 | PDF 964 KB |
| FCC ID label | ID Label/Location Info | 2006-07-17 | PDF 11 KB |
| FCC ID label location | ID Label/Location Info | 2006-07-17 | PDF 102.7 KB |
| 15C test setup photos | Test Setup Photos | 2008-03-04 | PDF 775.3 KB |
| 15E test setup photos | Test Setup Photos | 2008-03-04 | PDF 767.7 KB |
| Setup Photos 1 | Test Setup Photos | 2007-11-28 | PDF 1.3 MB |
| Setup photos | Test Setup Photos | 2007-11-28 | PDF 120.2 KB |
| Setup photos 2 | Test Setup Photos | 2007-11-28 | PDF 1.3 MB |
| Set up photos | Test Setup Photos | 2006-07-17 | PDF 80.9 KB |
| set up photos | Test Setup Photos | 2006-07-17 | PDF 317.8 KB |
| 15C test report pt1 | Test Report | 2008-03-04 | PDF 546.2 KB |
| 15C test report pt2 | Test Report | 2008-03-04 | PDF 601.3 KB |
| 15E test report pt1 | Test Report | 2008-03-04 | PDF 529.8 KB |
| 15E test report pt2 | Test Report | 2008-03-04 | PDF 1.1 MB |
| DFS test report | Test Report | 2007-10-14 | PDF 654.8 KB |
| DFS testreport 2 | Test Report | 2007-10-14 | PDF 120.3 KB |
| Test report | Test Report | 2006-07-17 | PDF 1 MB |
| Test report | Test Report | 2006-07-17 | PDF 1.1 MB |
| Attestation | Attestation Statements | 2007-10-14 | PDF 18.3 KB |
| attestation | Attestation Statements | 2006-07-17 | PDF 16.7 KB |
| LMA approval | Cover Letter(s) | 2008-03-04 | PDF 1.2 MB |
| LMA letter | Cover Letter(s) | 2008-03-04 | PDF 1.2 MB |
| PC request letter | Cover Letter(s) | 2008-03-04 | PDF 92.2 KB |
| agent letter | Cover Letter(s) | 2008-03-04 | PDF 27.3 KB |
| confidentiality letter | Cover Letter(s) | 2008-03-04 | PDF 24.2 KB |
| ATCB comments | Cover Letter(s) | 2007-10-14 | PDF 55.7 KB |
| POA | Cover Letter(s) | 2007-10-14 | PDF 28.6 KB |
| Reason for PC2 | Cover Letter(s) | 2007-10-14 | PDF 29.7 KB |
| Request for Short Term Confidentiality | Cover Letter(s) | 2007-10-14 | PDF 24.2 KB |
| Request for Sort Term Confidentiality | Cover Letter(s) | 2007-10-14 | PDF 24.2 KB |
| email response to ATCB | Cover Letter(s) | 2007-10-14 | PDF 17 KB |
| ATCB comments | Cover Letter(s) | 2006-07-17 | PDF 49.9 KB |
| LMA request | Cover Letter(s) | 2006-07-17 | PDF 87.3 KB |
| POA | Cover Letter(s) | 2006-07-17 | PDF 24.4 KB |
| Request for Confidentiality | Cover Letter(s) | 2006-07-17 | PDF 25.1 KB |
| Request for limited modular approval | Cover Letter(s) | 2006-07-17 | PDF 87.3 KB |
| Response to ATCB | Cover Letter(s) | 2006-07-17 | PDF 116.6 KB |
| MPE info pt1 | RF Exposure Info | 2008-03-04 | PDF 119.7 KB |
| MPE info pt2 | RF Exposure Info | 2008-03-04 | PDF 112 KB |
| SAR 1 | RF Exposure Info | 2007-10-14 | PDF 2.7 MB |
| SAR 2 | RF Exposure Info | 2007-10-14 | PDF 581.1 KB |
| SAR 2 | Parts List/Tune Up Info | 2007-10-14 | PDF 581.1 KB |
| SAR 3 | RF Exposure Info | 2007-10-14 | PDF 584.5 KB |
| SAR 4 | RF Exposure Info | 2007-10-14 | PDF 582.2 KB |
| MPE | RF Exposure Info | 2006-07-17 | PDF 126.1 KB |
| Block diagram Metadata only | Block Diagram | PDF 9.9 KB | |
| Schemaitcs Metadata only | Schematics | PDF 1 MB | |
| Schematics Metadata only | Schematics | PDF 1 MB | |
| Operational description Metadata only | Operational Description | PDF 126 KB |
Application Information
| Application ID | wMzSaTEl21vHcWvlavo2CA== |
|---|---|
| Final Action Date | 2008-03-04 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013616305 |
| Model | -SX10WAG |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | SX-10WAG |
| Responsible Party | Toshiro Kometani, Manager, kometani@silex.jp  , 81 774-98-3781 |
| Agent | Naoki Naoki Naoki, UL Japan, Inc., Naoki.Sakamoto@jp.ul.com  , +81-596-24-8116 |
| Technical Contact | Hironobu Shimoji, UL Japan, Inc., Hironobu.Shimoji@jp.ul.com , +81-596-24-8116 |
| Non-Technical Contact | Yuki Morimoto, UL Japan, Inc., Yuki.Morimoto@jp.ul.com , _81-596-24-8116 |
| Test Firm | Mitsuru Fujimura, UL Japan, Inc., mitsuru.fujimura@jp.ul.com , 81-596-24-8116 |
| TCB Email | hotline@atcb.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is Conducted. Limited Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This PC adds use of 8 dBi omni and 11 or 17 dBi directional gain antennas to the 5825 MHz DTS frequency and 5745 to 5805 MHz UNII bands only. Previous PC adds use of this module in a portable configuration in the WT-4 wireless transmitter for compatible Nikon digital cameras as shown in the filing. Body worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Max SAR reported is: Body 0.642 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| wMzSaTEl21vHcWvlavo2CA== | 2008-03-04 | Class II permissive change or modification of presently authorized equipment |
| YdJ0juIDgoM/z5Jk9QcX5Q== | 2008-03-04 | Class II permissive change or modification of presently authorized equipment |
| uvD/iXfhJj51Oat5Gm35PA== | 2007-10-14 | Class II permissive change or modification of presently authorized equipment |
| LaukvOXcIPzqOvsCEHhDzA== | 2007-10-14 | Class II permissive change or modification of presently authorized equipment |
| aeZp34XOYN7hcbV/aFvdiQ== | 2006-07-17 | Original Equipment |
| Z1yEQPDDt+tSMx88vTCG4w== | 2006-07-17 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Z1yEQPDDt+tSMx88vTCG4w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/17/2006 Application Dated: 07/15/2006 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SX10WAG |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SX-10WAG |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0442 | ||
| CC | 15C | 5825.0 - 5825.0 | 0.0197 |
| Power Output listed is Conducted. Limited Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Z1yEQPDDt+tSMx88vTCG4w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 07/17/2006 Application Dated: 07/15/2006 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SX10WAG |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SX-10WAG |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0442 | ||
| CC | 15C | 5825.0 - 5825.0 | 0.0197 |
| Power Output listed is Conducted. Limited Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/04/2008 Application Dated: 03/04/2008 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai,Seika-cho Sourakugun |
| Kyoto, 619-0237 Japan |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SX10WAG |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SX-10WAG |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5320.0 | 0.0184 | ||
| 15E | 5745.0 - 5805.0 | 0.0229 |
| Power Output listed is Conducted. Limited Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. This PC adds use of 8 dBi omni and 11 or 17 dBi directional gain antennas to the 5825 MHz DTS frequency and 5745 to 5805 MHz UNII bands only. Previous PC provides DFS capability for the 5250-5350 MHz range and adds use of this module in a portable configuration in the WT-4 wireless transmitter for compatible Nikon digital cameras as shown in the filing. This device operates only in Client Mode in the 5250-5350MHz bands. Body worn body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Max SAR reported is: Body 0.642 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application YdJ0juIDgoM/z5Jk9QcX5Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai,Seika-cho Sourakugun Kyoto, 619-0237 Japan |
Date of Grant: 03/04/2008 Application Dated: 03/04/2008 |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SX10WAG |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SX-10WAG |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5320.0 | 0.0184 | ||
| 15E | 5745.0 - 5805.0 | 0.0229 |
| Power Output listed is Conducted. Limited Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. This PC adds use of 8 dBi omni and 11 or 17 dBi directional gain antennas to the 5825 MHz DTS frequency and 5745 to 5805 MHz UNII bands only. Previous PC provides DFS capability for the 5250-5350 MHz range and adds use of this module in a portable configuration in the WT-4 wireless transmitter for compatible Nikon digital cameras as shown in the filing. This device operates only in Client Mode in the 5250-5350MHz bands. Body worn body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Max SAR reported is: Body 0.642 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/04/2008 Application Dated: 03/04/2008 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai,Seika-cho Sourakugun |
| Kyoto, 619-0237 Japan |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SX10WAG |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SX-10WAG |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0442 | ||
| 15C | 5825.0 - 5825.0 | 0.0197 |
| Power Output listed is Conducted. Limited Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This PC adds use of 8 dBi omni and 11 or 17 dBi directional gain antennas to the 5825 MHz DTS frequency and 5745 to 5805 MHz UNII bands only. Previous PC adds use of this module in a portable configuration in the WT-4 wireless transmitter for compatible Nikon digital cameras as shown in the filing. Body worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Max SAR reported is: Body 0.642 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application wMzSaTEl21vHcWvlavo2CA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai,Seika-cho Sourakugun Kyoto, 619-0237 Japan |
Date of Grant: 03/04/2008 Application Dated: 03/04/2008 |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SX10WAG |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SX-10WAG |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0442 | ||
| 15C | 5825.0 - 5825.0 | 0.0197 |
| Power Output listed is Conducted. Limited Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This PC adds use of 8 dBi omni and 11 or 17 dBi directional gain antennas to the 5825 MHz DTS frequency and 5745 to 5805 MHz UNII bands only. Previous PC adds use of this module in a portable configuration in the WT-4 wireless transmitter for compatible Nikon digital cameras as shown in the filing. Body worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Max SAR reported is: Body 0.642 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/14/2007 Application Dated: 10/10/2007 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai,Seika-cho Sourakugun |
| Kyoto, 619-0237 Japan |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SX10WAG |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SX-10WAG |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5320.0 | 0.018 | ||
| CC ND | 15E | 5745.0 - 5805.0 | 0.0229 |
| Power Output listed is Conducted. Limited Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. This PC provides DFS capability for the 5250-5350 MHz range and adds use of this module in a portable configuration in the WT-4 wireless transmitter for compatible Nikon digital cameras as shown in the filing. This device operates only in Client Mode in the 5250-5350MHz bands. Body worn body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Max SAR reported is: Body 0.642 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application uvD/iXfhJj51Oat5Gm35PA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai,Seika-cho Sourakugun Kyoto, 619-0237 Japan |
Date of Grant: 10/14/2007 Application Dated: 10/10/2007 |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SX10WAG |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SX-10WAG |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5320.0 | 0.018 | ||
| CC ND | 15E | 5745.0 - 5805.0 | 0.0229 |
| Power Output listed is Conducted. Limited Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. This PC provides DFS capability for the 5250-5350 MHz range and adds use of this module in a portable configuration in the WT-4 wireless transmitter for compatible Nikon digital cameras as shown in the filing. This device operates only in Client Mode in the 5250-5350MHz bands. Body worn body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Max SAR reported is: Body 0.642 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/14/2007 Application Dated: 10/10/2007 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai,Seika-cho Sourakugun |
| Kyoto, 619-0237 Japan |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SX10WAG |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SX-10WAG |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0442 | ||
| CC | 15C | 5825.0 - 5825.0 | 0.0197 |
| Power Output listed is Conducted. Limited Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This PC adds use of this module in a portable configuration in the WT-4 wireless transmitter for compatible Nikon digital cameras as shown in the filing. Body worn body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Max SAR reported is: Body 0.642 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application LaukvOXcIPzqOvsCEHhDzA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai,Seika-cho Sourakugun Kyoto, 619-0237 Japan |
Date of Grant: 10/14/2007 Application Dated: 10/10/2007 |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SX10WAG |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SX-10WAG |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0442 | ||
| CC | 15C | 5825.0 - 5825.0 | 0.0197 |
| Power Output listed is Conducted. Limited Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This PC adds use of this module in a portable configuration in the WT-4 wireless transmitter for compatible Nikon digital cameras as shown in the filing. Body worn body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Max SAR reported is: Body 0.642 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/17/2006 Application Dated: 07/15/2006 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SX10WAG |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SX-10WAG |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5320.0 | 0.0184 | ||
| CC | 15E | 5745.0 - 5805.0 | 0.0229 |
| Power Output listed is Conducted. Limited Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application aeZp34XOYN7hcbV/aFvdiQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 07/17/2006 Application Dated: 07/15/2006 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SX10WAG |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SX-10WAG |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5320.0 | 0.0184 | ||
| CC | 15E | 5745.0 - 5805.0 | 0.0229 |
| Power Output listed is Conducted. Limited Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |