FCC ID N6C-SX10WAN

Wireless 11abgn MiniPCI Adapter

by Silex Technology, Inc.

Grantee Code: N6C   Product Code: SX10WAN
Latest application date: 2009-05-15

FCC ID Device Details

FCC IDN6C-SX10WAN
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeN6C
Product CodeSX10WAN
Applicant BusinessSilex Technology, Inc. 🇯🇵
Related Domains silex.jp
Equipment ClassWireless 11abgn MiniPCI Adapter
Test FirmUL Japan, Inc. Head office EMC Lab.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2009-05-15
5180-5240 MHzOriginal Equipment2009-05-15

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2009-05-15PDF 45 KB
Internal photosInternal Photos2009-05-15PDF 176.1 KB
External photosExternal Photos2009-05-15PDF 176.1 KB
FCC ID labelID Label/Location Info2009-05-15PDF 274.8 KB
Set upTest Setup Photos2009-05-15PDF 503.8 KB
Set up Photos 2Test Setup Photos2009-05-15PDF 206.5 KB
Setup Photos 1Test Setup Photos2009-05-15PDF 922.6 KB
DFS report 1Test Report2009-05-15PDF 799 KB
DFS report 2Test Report2009-05-15PDF 133.5 KB
Test report 1Test Report2009-05-15PDF 637.1 KB
Test report 1Test Report2009-05-15PDF 704.2 KB
Test report 2Test Report2009-05-15PDF 2 MB
Test report 2Test Report2009-05-15PDF 3.1 MB
Test report 3Test Report2009-05-15PDF 2 MB
POACover Letter(s)2009-05-15PDF 175 KB
Request for confidentialityCover Letter(s)2009-05-15PDF 159.2 KB
Request for modular approval letterCover Letter(s)2009-05-15PDF 748.8 KB
MPERF Exposure Info2009-05-15PDF 112 KB
MPERF Exposure Info2009-05-15PDF 119.6 KB

Application Information

Application IDywWxXFf2y1wbqIF6FlnRGw==
Final Action Date2009-05-15
Application PurposeOriginal Equipment
Applicant FRN0013616305
Model-SX10WAN
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless 11abgn MiniPCI Adapter
Responsible PartyToshiro Kometani, Manager, kometani@silex.jp , 81 774-98-3781
Test FirmTetsuya Hashimoto, UL Japan, Inc. Head office EMC Lab., Tetsuya.Hashimoto@jp.ul.com , 81-596-24-8116
TCB Emailhotline@americantcb.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. Modular Approval. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
ywWxXFf2y1wbqIF6FlnRGw==2009-05-15Original Equipment
kWUiOvdmR3n3Ez+kOG4fww==2009-05-15Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.4615CCC
5180-5240 MHz0.03415ECC, ND
5260-5320 MHz0.0415ECC, ND
5745-5825 MHz0.39415CCC

Grants

TCB Grant - Application ywWxXFf2y1wbqIF6FlnRGw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/15/2009

Application Dated: 05/15/2009
Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SX10WAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless 11abgn MiniPCI Adapter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.46  
CC 15C 5745.0  -  5825.0 0.394  

Power Output listed is conducted. Modular Approval. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ywWxXFf2y1wbqIF6FlnRGw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
  Date of Grant: 05/15/2009

Application Dated: 05/15/2009
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SX10WAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless 11abgn MiniPCI Adapter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.46  
CC 15C 5745.0  -  5825.0 0.394  

Power Output listed is conducted. Modular Approval. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application kWUiOvdmR3n3Ez+kOG4fww==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/15/2009

Application Dated: 05/15/2009
Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SX10WAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless 11abgn MiniPCI Adapter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC ND 15E 5180.0  -  5240.0 0.034  
CC ND 15E 5260.0  -  5320.0 0.04  

Power Output listed is maximum combined conducted power. Modular Approval. This device can operate in a MIMO 3x3 configuration. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This is a client only device.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application kWUiOvdmR3n3Ez+kOG4fww==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
  Date of Grant: 05/15/2009

Application Dated: 05/15/2009
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SX10WAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless 11abgn MiniPCI Adapter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC ND 15E 5180.0  -  5240.0 0.034  
CC ND 15E 5260.0  -  5320.0 0.04  

Power Output listed is maximum combined conducted power. Modular Approval. This device can operate in a MIMO 3x3 configuration. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This is a client only device.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: