FCC ID N6C-SXPCEAC
PCI Express mini card WLAN module
by Silex Technology, Inc.
Grantee Code: N6C Product Code: SXPCEAC
Latest application date: 2016-07-26
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2016-07-26 |
| 5180-5320 MHz | Original Equipment | 2015-09-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2015-09-08 | PDF 60 KB |
| Internal Photo | Internal Photos | 2015-09-08 | PDF 814.3 KB |
| (Short term confidential) External Photo | External Photos | 2017-01-22 | PDF 31.5 KB |
| External Photo | External Photos | 2015-09-08 | PDF 841.5 KB |
| Label and Location | ID Label/Location Info | 2015-09-08 | PDF 250.9 KB |
| (Short term confidential) FCC DFS Setup Photo | Test Setup Photos | 2017-01-22 | PDF 249.1 KB |
| (Short term confidential) FCC Test Setup Photo_NII_Antenna1 | Test Setup Photos | 2017-01-22 | PDF 384.9 KB |
| (Short term confidential) FCC Test Setup Photo_NII_Antenna2 | Test Setup Photos | 2017-01-22 | PDF 595.3 KB |
| FCC DFS Setup Photo | Test Setup Photos | 2015-09-08 | PDF 208.7 KB |
| FCC Setup Photo_NII | Test Setup Photos | 2015-09-08 | PDF 524.6 KB |
| DFS Report | Test Report | 2016-07-26 | PDF 1.1 MB |
| Test Report_NII_Antenna1 | Test Report | 2016-07-26 | PDF 943.8 KB |
| Test Report_NII_Antenna2 | Test Report | 2016-07-26 | PDF 1.4 MB |
| FCC DFS Report | Test Report | 2015-09-08 | PDF 604.1 KB |
| FCC Test Report_NII | Test Report | 2015-09-08 | PDF 2.9 MB |
| Authorization Letter | Cover Letter(s) | 2016-07-26 | PDF 311.8 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2016-07-26 | PDF 184.7 KB |
| Request for Confidentiality Letter | Cover Letter(s) | 2016-07-26 | PDF 273.9 KB |
| Request for Short-term Confidentiality Letter | Cover Letter(s) | 2016-07-26 | PDF 291.8 KB |
| FCC Authorization Letter | Cover Letter(s) | 2015-09-08 | PDF 893.6 KB |
| FCC Declaration Letter of FCC 14-30_Old rule or New rule | Cover Letter(s) | 2015-09-08 | PDF 765.8 KB |
| FCC Declaration of Professional Installation (software) | Cover Letter(s) | 2015-09-08 | PDF 770.7 KB |
| FCC MA Letter | Cover Letter(s) | 2015-09-08 | PDF 1.3 MB |
| FCC Request for Confidentiality Letter | Cover Letter(s) | 2015-09-08 | PDF 806.6 KB |
| FCC RF Exposure_NII | RF Exposure Info | 2015-09-08 | PDF 53.1 KB |
| (Confidential) Block Diagram Metadata only | Block Diagram | PDF 262.4 KB | |
| (Confidential) Schematics Metadata only | Schematics | PDF 1.3 MB | |
| (Confidential) Theory of Operation-Antenna List Metadata only | Operational Description | PDF 27.4 KB | |
| (Confidential) Theory of Operation-Antenna Specification Metadata only | Operational Description | PDF 378.6 KB | |
| (Confidential) Theory of Operation-Antenna Specification(Antenna1) Metadata only | Operational Description | PDF 587.1 KB | |
| (Confidential) Theory of Operation-Antenna Specification(Antenna2) Metadata only | Operational Description | PDF 1.9 MB | |
| (Confidential) Theory of Operation-Interface Specification Metadata only | Operational Description | PDF 332.9 KB | |
| (Confidential) Theory of Operation-Software Security Metadata only | Operational Description | PDF 22.7 KB | |
| (Confidential) Theory of Operation-Software Security Metadata only | Operational Description | PDF 1.2 MB | |
| (Confidential) Theory of Operation-Specification Metadata only | Operational Description | PDF 1 MB | |
| (Confidential) Parts List Metadata only | Parts List/Tune Up Info | PDF 913.1 KB |
Application Information
| Application ID | WAGBt9W/W9HeTEVCV/eCIQ== |
|---|---|
| Final Action Date | 2016-07-26 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013616305 |
| Model | SXPCEAC |
| Frequency Range | 5180-5320 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | PCI Express mini card WLAN module |
| Responsible Party | Yoshinori Nakai, General Manager, nakai@silex.jp  , 81 774-98-3781 |
| Agent | Yoshihisa Yoshihisa Yoshihisa, UL Japan, Inc., Yoshihisa.Maeda@ul.com  , 81-596-24-8999 |
| Technical Contact | Takahiro Hatakeda, UL Japan, Inc., Takahiro.Hatakeda@ul.com , 81-596-24-8999 |
| Test Firm | Tetsuya Hashimoto, UL Japan, Inc. Head office EMC Lab., Tetsuya.Hashimoto@jp.ul.com  , +81-596-24-8116 |
| TCB Email | emc.jp@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 01/22/2017 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class II Permissive Change to add the Dynamic Frequency Selection (DFS) master function and specific antennas described in the filing. Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| WAGBt9W/W9HeTEVCV/eCIQ== | 2016-07-26 | Class II permissive change or modification of presently authorized equipment |
| O3rmC30255SB7YpTRW4xwg== | 2015-09-08 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application WAGBt9W/W9HeTEVCV/eCIQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 07/26/2016 Application Dated: 05/24/2016 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAC |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 MO ND | 15E | 5180.0 - 5320.0 | 0.1194 | ||
| 38 MO ND | 15E | 5500.0 - 5700.0 | 0.1061 | ||
| 38 MO | 15E | 5745.0 - 5825.0 | 0.0231 |
| Class II Permissive Change to add the Dynamic Frequency Selection (DFS) master function and specific antennas described in the filing. Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application WAGBt9W/W9HeTEVCV/eCIQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 07/26/2016 Application Dated: 05/24/2016 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAC |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 MO ND | 15E | 5180.0 - 5320.0 | 0.1194 | ||
| 38 MO ND | 15E | 5500.0 - 5700.0 | 0.1061 | ||
| 38 MO | 15E | 5745.0 - 5825.0 | 0.0231 |
| Class II Permissive Change to add the Dynamic Frequency Selection (DFS) master function and specific antennas described in the filing. Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 09/08/2015 Application Dated: 09/08/2015 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAC |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 MO ND | 15E | 5180.0 - 5320.0 | 0.1194 | ||
| 38 MO ND | 15E | 5500.0 - 5700.0 | 0.1061 | ||
| 38 MO | 15E | 5745.0 - 5825.0 | 0.0231 |
| Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application O3rmC30255SB7YpTRW4xwg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 09/08/2015 Application Dated: 09/08/2015 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAC |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 MO ND | 15E | 5180.0 - 5320.0 | 0.1194 | ||
| 38 MO ND | 15E | 5500.0 - 5700.0 | 0.1061 | ||
| 38 MO | 15E | 5745.0 - 5825.0 | 0.0231 |
| Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |