FCC ID N6C-SXPCEAC2

SX-PCEAC2

by Silex Technology, Inc.

Grantee Code: N6C   Product Code: SXPCEAC2
Latest application date: 2023-04-14

FCC ID Device Details

FCC IDN6C-SXPCEAC2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeN6C
Product CodeSXPCEAC2
Applicant BusinessSilex Technology, Inc. 🇯🇵
Related Domains silex.jp
Equipment ClassSX-PCEAC2
Test FirmVista Laboratories, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2023-04-14
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-04-13
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-04-13
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-10-12
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-09-24
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-04-24
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2019-04-24
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-07-20
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2018-07-20
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-07-20
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 05/29/20152018-05-18
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 05/29/20152018-05-18
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 05/29/20152018-05-18

Exhibits

DocumentTypeAvailableFile
Internal PhotosInternal Photos2020-09-24PDF 470.8 KB
Internal PhotosInternal Photos2018-07-20PDF 420.2 KB
External PhotosExternal Photos2023-10-10PDF 146.7 KB
External PhotosExternal Photos2020-09-24PDF 761 KB
External PhotosExternal Photos2018-07-20PDF 708.2 KB
External PhotosExternal Photos2018-05-18PDF 1.6 MB
LabelID Label/Location Info2018-05-18PDF 64.9 KB
Test Setup PhotosTest Setup Photos2023-10-10PDF 402.6 KB
Test Setup PhotosTest Setup Photos2021-10-12PDF 842.2 KB
Test Setup PhotosTest Setup Photos2020-09-24PDF 479.5 KB
Test Setup PhotosTest Setup Photos2019-04-24PDF 244.4 KB
Test Setup PhotosTest Setup Photos2018-07-20PDF 506.8 KB
Test Setup Photos_BLETest Setup Photos2018-07-20PDF 506.8 KB
Antenna ReportTest Report2023-04-14PDF 1.9 MB
Test ReportTest Report2023-04-14PDF 1.8 MB
Test ReportTest Report2023-04-13PDF 1.2 MB
Test ReportTest Report2021-10-12PDF 1.1 MB
Test ReportTest Report2020-09-24PDF 546.4 KB
DTS Test ReportTest Report2019-04-24PDF 2.2 MB
NII Test ReportTest Report2019-04-24PDF 2.3 MB
Test ReportTest Report2018-07-20PDF 2.2 MB
Test ReportTest Report2018-07-20PDF 744.4 KB
Test Report_BLETest Report2018-07-20PDF 508.3 KB
Test Report_WLANTest Report2018-07-20PDF 1 MB
Attestation Statement Letter 1Attestation Statements2023-04-14PDF 25 KB
Attestation Statement Letter 2Attestation Statements2023-04-14PDF 25.9 KB
USA Agent of Service for Process LetterAttestation Statements2023-04-14PDF 783.1 KB
USA Agent for Service of ProcessAttestation Statements2023-04-13PDF 783.1 KB
Confidentiality Request letterCover Letter(s)2023-04-14PDF 230.3 KB
FCC Agent Authorization LetterCover Letter(s)2023-04-14PDF 165.5 KB
FCC Class II Permissive Change Request LetterCover Letter(s)2023-04-14PDF 147 KB
Confidentiality Request LetterCover Letter(s)2023-04-13PDF 230.3 KB
Class II permissive change letterCover Letter(s)2021-10-12PDF 30.4 KB
Declaration of authorizationCover Letter(s)2021-10-12PDF 266.2 KB
Declaration of authorizationCover Letter(s)2020-09-24PDF 32.3 KB
class II permissive letterCover Letter(s)2020-09-24PDF 32.1 KB
Class II Permissive Change LetterCover Letter(s)2019-04-24PDF 306.7 KB
Product Certification Representative Auth LetterCover Letter(s)2019-04-24PDF 334.6 KB
Class II Permissive Change LetterCover Letter(s)2018-07-20PDF 254.7 KB
ConfidentialityCover Letter(s)2018-07-20PDF 345.1 KB
Declaration of authorizationCover Letter(s)2018-07-20PDF 190.2 KB
Agent Authorization LetterCover Letter(s)2018-05-18PDF 1.2 MB
ID Change Authorization LetterCover Letter(s)2018-05-18PDF 179.1 KB
ID Change Request LetterCover Letter(s)2018-05-18PDF 32.7 KB
RF Exposure InfoRF Exposure Info2021-10-12PDF 274.4 KB
MPE CalculationRF Exposure Info2019-04-24PDF 96.6 KB

Application Information

Application IDewaXNtwI8RzUOVEpczaCrQ==
Final Action Date2023-04-14
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0013616305
ModelSXPCEAC2
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionSX-PCEAC2
Responsible PartyYoshinori Nakai, General Manager, nakai@silex.jp , 81 774-98-3781
Test FirmDavid Zhang, Vista Laboratories, Inc., info@vista-compliance.com , +1 (949) 464-7589
TCB Emailcb@vista-compliance.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date10/10/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive change to add new antenna as documented (Taoglass GW.05.0153 monopole antenna). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

Applications

Application IDDatePurpose
ewaXNtwI8RzUOVEpczaCrQ==2023-04-14Class II permissive change or modification of presently authorized equipment
mz+Fl1IRdZC2Cr00LJnSRQ==2023-04-13Class II permissive change or modification of presently authorized equipment
KFr767r5rHe9MtkszMit4w==2023-04-13Class II permissive change or modification of presently authorized equipment
XStonRkfNXEcipmrgSjOXQ==2021-10-12Class II permissive change or modification of presently authorized equipment
Kn/Opd6Y3n6rDv9YYewluw==2020-09-24Class II permissive change or modification of presently authorized equipment
rB9Pb2xQ9R2VBEMMZRocrw==2019-04-24Class II permissive change or modification of presently authorized equipment
bFXqZuxB0Qt03KzKkjVS8w==2019-04-24Class II permissive change or modification of presently authorized equipment
hxOmIe+zKItJuI0Szz9t2A==2018-07-20Class II permissive change or modification of presently authorized equipment
IzYOtYHS3Vd7xDYypz9OrA==2018-07-20Class II permissive change or modification of presently authorized equipment
HAD1SkB00jrIt+RU5KonGQ==2018-07-20Class II permissive change or modification of presently authorized equipment
stmj/vb9YEYNt59tHXM+zw==2018-05-18Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 05/29/2015
Ng2VZma9HMQKu3w2YV8g9w==2018-05-18Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 05/29/2015
7LHeX8uuHaXi61QnFSnejw==2018-05-18Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 05/29/2015
6gXAl++dcqhr6nNkdaagQA==2018-05-18Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 05/29/2015

Equipment Authorization

FrequencyOutputRulesGrant Notes
15BCC
2402-2480 MHz0.015000015CCC
2402-2480 MHz0.00215CCC
2402-2480 MHz0.00215CCC, MO
2412-2462 MHz0.48515CCC, MO
2422-2452 MHz0.20515CCC, MO
5180-5240 MHz0.0815E38, CC, MO
5180-5240 MHz0.0815ECC, MO
5260-5320 MHz0.074915E38, CC, MO
5260-5320 MHz0.074915ECC, MO
5500-5720 MHz0.050115E38, CC, MO
5500-5700 MHz0.050115ECC, MO
5500-5720 MHz0.050115ECC, MO
5745-5825 MHz0.067415E38, CC, MO
5745-5825 MHz0.067415ECC, MO

Grants

TCB Grant - Application XStonRkfNXEcipmrgSjOXQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 10/12/2021

Application Dated: 09/30/2021
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.08  
CC MO 15E 5260.0  -  5320.0 0.0749  
CC MO 15E 5500.0  -  5720.0 0.0501  
CC MO 15E 5745.0  -  5825.0 0.0674  

Class II Permissive change : The major change is to decrease output power of WLAN 5GHz by SW.

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application XStonRkfNXEcipmrgSjOXQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 10/12/2021

Application Dated: 09/30/2021
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.08  
CC MO 15E 5260.0  -  5320.0 0.0749  
CC MO 15E 5500.0  -  5720.0 0.0501  
CC MO 15E 5745.0  -  5825.0 0.0674  

Class II Permissive change : The major change is to decrease output power of WLAN 5GHz by SW.

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application stmj/vb9YEYNt59tHXM+zw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/18/2018

Application Dated: 05/18/2018
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application stmj/vb9YEYNt59tHXM+zw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 05/18/2018

Application Dated: 05/18/2018
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application rB9Pb2xQ9R2VBEMMZRocrw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 04/24/2019

Application Dated: 04/24/2019
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.08  
CC MO 15E 5260.0  -  5320.0 0.0749  
CC MO 15E 5500.0  -  5720.0 0.0501  
CC MO 15E 5745.0  -  5825.0 0.0674  

C2PC to add Taoglass MA350.A.CG.003 Antenna (Screw Mount Omni-Directional Antenna). Antenna gain: 2.4GHz MIMO Ant1: 3.5dBi Ant2: 5.5dBi / 5GHz MIMO Ant1: 1.6dBi Ant2: 2.3dBi

Original Grant Comment: Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application rB9Pb2xQ9R2VBEMMZRocrw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 04/24/2019

Application Dated: 04/24/2019
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.08  
CC MO 15E 5260.0  -  5320.0 0.0749  
CC MO 15E 5500.0  -  5720.0 0.0501  
CC MO 15E 5745.0  -  5825.0 0.0674  

C2PC to add Taoglass MA350.A.CG.003 Antenna (Screw Mount Omni-Directional Antenna). Antenna gain: 2.4GHz MIMO Ant1: 3.5dBi Ant2: 5.5dBi / 5GHz MIMO Ant1: 1.6dBi Ant2: 2.3dBi

Original Grant Comment: Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Ng2VZma9HMQKu3w2YV8g9w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/18/2018

Application Dated: 05/18/2018
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2402.0  -  2480.0 0.002  
CC MO 15C 2412.0  -  2462.0 0.485  
CC MO 15C 2422.0  -  2452.0 0.205  

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Ng2VZma9HMQKu3w2YV8g9w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 05/18/2018

Application Dated: 05/18/2018
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2402.0  -  2480.0 0.002  
CC MO 15C 2412.0  -  2462.0 0.485  
CC MO 15C 2422.0  -  2452.0 0.205  

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application mz+Fl1IRdZC2Cr00LJnSRQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Vista Laboratories, Inc.
1261 Puerta Del Sol
San Clemente, CA 92673
Date of Grant: 04/13/2023

Application Dated: 04/13/2023
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC MO 15C 2412.0  -  2462.0 0.485  
CC MO 15C 2422.0  -  2452.0 0.205  

Class II Permissive change to add new antenna as documented (Taoglass GW.05.0153 monopole antenna). Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application mz+Fl1IRdZC2Cr00LJnSRQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 04/13/2023

Application Dated: 04/13/2023
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC MO 15C 2412.0  -  2462.0 0.485  
CC MO 15C 2422.0  -  2452.0 0.205  

Class II Permissive change to add new antenna as documented (Taoglass GW.05.0153 monopole antenna). Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Kn/Opd6Y3n6rDv9YYewluw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 09/24/2020

Application Dated: 09/04/2020
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC MO 15C 2412.0  -  2462.0 0.485  
CC MO 15C 2422.0  -  2452.0 0.205  

Class II Permissive change : Only firmware is modified to decrease power output of 802.11b modes.

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Kn/Opd6Y3n6rDv9YYewluw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 09/24/2020

Application Dated: 09/04/2020
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC MO 15C 2412.0  -  2462.0 0.485  
CC MO 15C 2422.0  -  2452.0 0.205  

Class II Permissive change : Only firmware is modified to decrease power output of 802.11b modes.

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application KFr767r5rHe9MtkszMit4w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Vista Laboratories, Inc.
1261 Puerta Del Sol
San Clemente, CA 92673
Date of Grant: 04/13/2023

Application Dated: 04/13/2023
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.015  

Class II Permissive change to add new antenna as documented (Taoglass GW.05.0153 monopole antenna). Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application KFr767r5rHe9MtkszMit4w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 04/13/2023

Application Dated: 04/13/2023
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.015  

Class II Permissive change to add new antenna as documented (Taoglass GW.05.0153 monopole antenna). Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application IzYOtYHS3Vd7xDYypz9OrA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 07/20/2018

Application Dated: 07/19/2018
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.015  

Class II Permissive change : The major change is to add antennas with new type.

Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application IzYOtYHS3Vd7xDYypz9OrA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 07/20/2018

Application Dated: 07/19/2018
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.015  

Class II Permissive change : The major change is to add antennas with new type.

Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application hxOmIe+zKItJuI0Szz9t2A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 07/20/2018

Application Dated: 07/19/2018
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: SX-PCEAC2
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC MO 15C 2412.0  -  2462.0 0.485  
CC MO 15C 2422.0  -  2452.0 0.205  

Class II Permissive change : The major change is to add antennas with new types.

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application hxOmIe+zKItJuI0Szz9t2A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 07/20/2018

Application Dated: 07/19/2018
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: SX-PCEAC2
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC MO 15C 2412.0  -  2462.0 0.485  
CC MO 15C 2422.0  -  2452.0 0.205  

Class II Permissive change : The major change is to add antennas with new types.

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application HAD1SkB00jrIt+RU5KonGQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 07/20/2018

Application Dated: 07/19/2018
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: SX-PCEAC2
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.08  
CC MO 15E 5260.0  -  5320.0 0.0749  
CC MO 15E 5500.0  -  5720.0 0.0501  
CC MO 15E 5745.0  -  5825.0 0.0674  

Class II Permissive change : The major change is to add antennas with new types.

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application HAD1SkB00jrIt+RU5KonGQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 07/20/2018

Application Dated: 07/19/2018
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: SX-PCEAC2
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.08  
CC MO 15E 5260.0  -  5320.0 0.0749  
CC MO 15E 5500.0  -  5720.0 0.0501  
CC MO 15E 5745.0  -  5825.0 0.0674  

Class II Permissive change : The major change is to add antennas with new types.

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ewaXNtwI8RzUOVEpczaCrQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Vista Laboratories, Inc.
1261 Puerta Del Sol
San Clemente, CA 92673
Date of Grant: 04/14/2023

Application Dated: 04/14/2023
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.08  
CC MO 15E 5260.0  -  5320.0 0.0749  
CC MO 15E 5500.0  -  5700.0 0.0501  
CC MO 15E 5745.0  -  5825.0 0.0674  

Class II Permissive change to add new antenna as documented (Taoglass GW.05.0153 monopole antenna). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application ewaXNtwI8RzUOVEpczaCrQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 04/14/2023

Application Dated: 04/14/2023
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.08  
CC MO 15E 5260.0  -  5320.0 0.0749  
CC MO 15E 5500.0  -  5700.0 0.0501  
CC MO 15E 5745.0  -  5825.0 0.0674  

Class II Permissive change to add new antenna as documented (Taoglass GW.05.0153 monopole antenna). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application bFXqZuxB0Qt03KzKkjVS8w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 04/24/2019

Application Dated: 04/24/2019
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.485  
CC MO 15C 2422.0  -  2452.0 0.205  

C2PC to add Taoglass MA350.A.CG.003 Antenna (Screw Mount Omni-Directional Antenna). Antenna gain: 2.4GHz MIMO Ant1: 3.5dBi Ant2: 5.5dBi / 5GHz MIMO Ant1: 1.6dBi Ant2: 2.3dBi. Bluetooth is disabled

Original Grant Comment: Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application bFXqZuxB0Qt03KzKkjVS8w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 04/24/2019

Application Dated: 04/24/2019
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.485  
CC MO 15C 2422.0  -  2452.0 0.205  

C2PC to add Taoglass MA350.A.CG.003 Antenna (Screw Mount Omni-Directional Antenna). Antenna gain: 2.4GHz MIMO Ant1: 3.5dBi Ant2: 5.5dBi / 5GHz MIMO Ant1: 1.6dBi Ant2: 2.3dBi. Bluetooth is disabled

Original Grant Comment: Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 7LHeX8uuHaXi61QnFSnejw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/18/2018

Application Dated: 05/18/2018
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.015  

Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 7LHeX8uuHaXi61QnFSnejw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 05/18/2018

Application Dated: 05/18/2018
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.015  

Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 6gXAl++dcqhr6nNkdaagQA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/18/2018

Application Dated: 05/18/2018
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.08  
38 CC MO 15E 5260.0  -  5320.0 0.0749  
38 CC MO 15E 5500.0  -  5720.0 0.0501  
38 CC MO 15E 5745.0  -  5825.0 0.0674  

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 6gXAl++dcqhr6nNkdaagQA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 05/18/2018

Application Dated: 05/18/2018
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAC2
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: SX-PCEAC2
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.08  
38 CC MO 15E 5260.0  -  5320.0 0.0749  
38 CC MO 15E 5500.0  -  5720.0 0.0501  
38 CC MO 15E 5745.0  -  5825.0 0.0674  

Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: