FCC ID N6C-SXPCEAN

Wireless LAN PCI Express Mini Card Module

by Silex Technology, Inc.

Grantee Code: N6C   Product Code: SXPCEAN
Latest application date: 2017-03-17

Device Images

FCC ID Device Details

FCC IDN6C-SXPCEAN
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeN6C
Product CodeSXPCEAN
Applicant BusinessSilex Technology, Inc. 🇯🇵
Related Domains silex.jp
Equipment ClassWireless LAN PCI Express Mini Card Module
Test FirmUL Japan, Inc. Head office EMC Lab.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5320 MHzClass II permissive change or modification of presently authorized equipment2017-03-17
5180-5320 MHzClass II permissive change or modification of presently authorized equipment2016-11-03
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2014-08-04
5180-5320 MHzClass II permissive change or modification of presently authorized equipment2014-08-04
5745-5825 MHzClass II permissive change or modification of presently authorized equipment2014-06-30
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2014-06-27
5180-5320 MHzClass II permissive change or modification of presently authorized equipment2014-06-27
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2013-06-03
5180-5320 MHzClass II permissive change or modification of presently authorized equipment2013-06-03
5180-5320 MHzOriginal Equipment2012-12-14
2412-2462 MHzOriginal Equipment2012-12-14

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2014-06-30PDF 167.4 KB
Users Manual 2Users Manual2014-06-30PDF 694.7 KB
05 Users Manual_Rev.pdfUsers Manual2012-12-14PDF 338.8 KB
Users ManualUsers Manual2012-12-14PDF 339.3 KB
Internal PhotosInternal Photos2014-06-30PDF 381.9 KB
Internal PhotosInternal Photos2014-06-27PDF 109.7 KB
Internal Photos 2Internal Photos2014-06-27PDF 159.8 KB
Internal Photos 3Internal Photos2014-06-27PDF 381.9 KB
Internal PhotoInternal Photos2012-12-14PDF 253.2 KB
External Photo_Antenna_AA222External Photos2014-08-04PDF 128.4 KB
External PhotosExternal Photos2014-06-30PDF 517.3 KB
External Photos 2External Photos2014-06-30PDF 610.9 KB
External PhotosExternal Photos2014-06-27PDF 304.7 KB
External Photos 2External Photos2014-06-27PDF 309.1 KB
Antenna Photo (ANT1267-164C U-100B)External Photos2013-06-03PDF 117.5 KB
External PhotoExternal Photos2012-12-14PDF 257.4 KB
FCC Labeling Requirements and InformationID Label/Location Info2012-12-14PDF 20.5 KB
Label & LocationID Label/Location Info2012-12-14PDF 239.2 KB
Test setup photos(DFS)Test Setup Photos2017-03-17PDF 990 KB
Test setup photos(W56)Test Setup Photos2017-03-17PDF 255.9 KB
FCC Test Setup Photo_NIITest Setup Photos2016-11-03PDF 1.5 MB
FCC15C test setup photoTest Setup Photos2014-08-04PDF 562.8 KB
FCC15E test setup photoTest Setup Photos2014-08-04PDF 562.2 KB
Test Setup PhotosTest Setup Photos2014-06-30PDF 204.9 KB
FCC test setup photo (15.247)Test Setup Photos2013-06-03PDF 492.4 KB
FCC test setup photo (15.407 DFS)Test Setup Photos2013-06-03PDF 244.7 KB
FCC test setup photo (15.407)Test Setup Photos2013-06-03PDF 535.7 KB
03-3 FCC test setup photo (15.407)Test Setup Photos2012-12-14PDF 608.9 KB
03-5 FCC test setup photo (15.407_DFS)Test Setup Photos2012-12-14PDF 83.9 KB
FCC test setup photo (15.247)Test Setup Photos2012-12-14PDF 561.7 KB
Test report(DFS)Test Report2017-03-17PDF 1.1 MB
Test report(W56)Test Report2017-03-17PDF 602.5 KB
FCC Test Report_NIITest Report2016-11-03PDF 2.5 MB
FCC15C reportTest Report2014-08-04PDF 662.7 KB
FCC15E reportTest Report2014-08-04PDF 661.2 KB
Test ReportTest Report2014-06-30PDF 1.1 MB
Test ReportTest Report2014-06-27PDF 1,006.5 KB
FCC report (15.247)Test Report2013-06-03PDF 640.1 KB
FCC report (15.407 DFS)Test Report2013-06-03PDF 553.1 KB
FCC report (15.407)Test Report2013-06-03PDF 619.5 KB
03-2 FCC report (15.407)Test Report2012-12-14PDF 1.1 MB
03-4 FCC report (15.407_DFS)Test Report2012-12-14PDF 836.6 KB
FCC report (15.247)Test Report2012-12-14PDF 2 MB
Authorization letterCover Letter(s)2017-03-17PDF 56.5 KB
C2PC letterCover Letter(s)2017-03-17PDF 467.6 KB
Confidentiality letterCover Letter(s)2017-03-17PDF 46.2 KB
FCC Authorization LetterCover Letter(s)2016-11-03PDF 170.5 KB
FCC Class II Permissive Change Letter (FCC 14-30_Old rule or New rule)Cover Letter(s)2016-11-03PDF 264.7 KB
FCC Request for Confidentiality Letter(SX-PCEAN W58)Cover Letter(s)2016-11-03PDF 135.8 KB
FCC Authorization LetterCover Letter(s)2014-08-04PDF 90.2 KB
FCC Class II Permissive Change LetterCover Letter(s)2014-08-04PDF 20 KB
FCC MA LetterCover Letter(s)2014-08-04PDF 178.1 KB
FCC Request for Confidentiality LetterCover Letter(s)2014-08-04PDF 73.6 KB
Reassessment LetterCover Letter(s)2014-06-30PDF 597.8 KB
Reassessment LetterCover Letter(s)2014-06-27PDF 522.8 KB
FCC Authorization LetterCover Letter(s)2013-06-03PDF 30.3 KB
FCC Class II Permissive Change LetterCover Letter(s)2013-06-03PDF 37.2 KB
FCC Declaration Letter of professional installCover Letter(s)2013-06-03PDF 25.6 KB
FCC MA letterCover Letter(s)2013-06-03PDF 55.2 KB
FCC Request for confidentiality letterCover Letter(s)2013-06-03PDF 24.2 KB
FCC MA letterCover Letter(s)2012-12-14PDF 62.6 KB
FCC Manufacturer’s LetterCover Letter(s)2012-12-14PDF 19.8 KB
FCC Request for confidentiality letterCover Letter(s)2012-12-14PDF 24.7 KB
RF EXRF Exposure Info2017-03-17PDF 16.5 KB
FCC RF Exposure_NIIRF Exposure Info2016-11-03PDF 16.6 KB
RF Exposure (15C)RF Exposure Info2014-08-04PDF 33.5 KB
RF Exposure (15E)RF Exposure Info2014-08-04PDF 33 KB
RF ExposureRF Exposure Info2014-06-30PDF 554.4 KB
RF Exposure Metadata onlyRF Exposure Info2014-06-27PDF 611.4 KB
RF Exposure Info Metadata onlyRF Exposure Info2014-06-27PDF 611.4 KB
RF Exposure InformationRF Exposure Info2014-06-27PDF 551.8 KB
FCC RF exposure sheet_DTSRF Exposure Info2013-06-03PDF 31.7 KB
FCC RF exposure sheet_NIIRF Exposure Info2013-06-03PDF 74.9 KB
03-1 FCC RF exposure sheet (15.407)RF Exposure Info2012-12-14PDF 74.9 KB
FCC RF exposure sheet (15.247)RF Exposure Info2012-12-14PDF 31.5 KB
Block diagram Metadata onlyBlock DiagramPDF 48.9 KB
(Confidential) Theory of Operation-Software Security Metadata onlyOperational DescriptionPDF 21.8 KB
(Confidential)Theory of Operation-Antenna_AA222 Metadata onlyOperational DescriptionPDF 704.8 KB
(Confidential)Theory operation_antenna list Metadata onlyOperational DescriptionPDF 19 KB
(Confidential)Theory operation_antenna list Metadata onlyOperational DescriptionPDF 15.7 KB
04 (Confidential)Theory of Operation-Antenna_AA222 Metadata onlyOperational DescriptionPDF 352.9 KB
04 (Confidential)Theory operation_antenna list_R Metadata onlyOperational DescriptionPDF 36.7 KB
Operational description Metadata onlyOperational DescriptionPDF 602.4 KB
Operational description(Antenna list) Metadata onlyOperational DescriptionPDF 24.5 KB
Operational description(Channel list) Metadata onlyOperational DescriptionPDF 35.9 KB
Operational description(Security) Metadata onlyOperational DescriptionPDF 22.2 KB
Operational description(Security_reviced) Metadata onlyOperational DescriptionPDF 22.2 KB

Application Information

Application IDReak9m2TF/Jx7lalaHJoyA==
Final Action Date2017-03-17
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0013616305
ModelSXPCEAN
Frequency Range5180-5320 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless LAN PCI Express Mini Card Module
Responsible PartyYoshinori Nakai, General Manager, nakai@silex.jp , 81 774-98-3781
AgentYoshihisa Yoshihisa Yoshihisa, UL Japan, Inc., Yoshihisa.Maeda@ul.com , 81-596-24-8999
Technical ContactTsubasa Takayama, UL Japan, Inc., Tsubasa.Takayama@ul.com , 81-596-24-8999
Test FirmTetsuya Hashimoto, UL Japan, Inc. Head office EMC Lab., Tetsuya.Hashimoto@jp.ul.com , +81-596-24-8116
TCB Emailemc.jp@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsClass II Permissive Change to add the W56 band(Applied for following one antenna only: ANTDP-027A0). Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.

Applications

Application IDDatePurpose
Reak9m2TF/Jx7lalaHJoyA==2017-03-17Class II permissive change or modification of presently authorized equipment
FvXVI5Q2wgf51I5+mwSGBA==2016-11-03Class II permissive change or modification of presently authorized equipment
lTcsSRrBTPIuR6hLxGokqw==2014-08-04Class II permissive change or modification of presently authorized equipment
UWVk46Y3R6xZK8pGYneLTA==2014-08-04Class II permissive change or modification of presently authorized equipment
mfayCVEOdOLxLipug48w4A==2014-06-30Class II permissive change or modification of presently authorized equipment
ex7VSTvMM36KZI0HAJ/Zpw==2014-06-27Class II permissive change or modification of presently authorized equipment
YN+DW5XdF5Hp5ltswVq7zw==2014-06-27Class II permissive change or modification of presently authorized equipment
C4NByq2PBLoueTDZh+LzrA==2013-06-03Class II permissive change or modification of presently authorized equipment
/BEOG8t/fS0TiXY78+TONQ==2013-06-03Class II permissive change or modification of presently authorized equipment
mcALDYEnzw3wQB/hCkgGpQ==2012-12-14Original Equipment
YRPX3enT3gFG8mJCfJsLhA==2012-12-14Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.551615CCC, MO
2412-2462 MHz0.551615CCC
5180-5320 MHz0.026615E38, CC, MO, ND
5180-5320 MHz0.026600015ECC, MO, ND
5180-5320 MHz0.026600015EMO
5500-5700 MHz0.042915E38, CC, MO, ND
5745-5825 MHz0.345600015C36, CC
5745-5825 MHz0.345615CCC, MO
5745-5825 MHz0.03515E38, CC, MO
5745-5825 MHz0.345615CCC

Grants

TCB Grant - Application YRPX3enT3gFG8mJCfJsLhA==

This application does not exist.

EAS Grant - Application YRPX3enT3gFG8mJCfJsLhA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
  Date of Grant: 12/14/2012

Application Dated: 10/12/2012
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.5516  
CC 15C 5745.0  -  5825.0 0.3456  

Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application YN+DW5XdF5Hp5ltswVq7zw==

Mail To:
Yoshinobu Asai, Team Leader
UL Japan, Inc.
4383-326 Asama-cho, Ise-shi
Mie-ken, 516-0021
Japan
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CKC Certification Services, LLC
5046 Sierra Pines
Mariposa, CA 95338
Date of Grant: 06/27/2014

Application Dated: 06/24/2014
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5180.0  -  5320.0 0.0266  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application YN+DW5XdF5Hp5ltswVq7zw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 06/27/2014

Application Dated: 06/24/2014
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5180.0  -  5320.0 0.0266  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application UWVk46Y3R6xZK8pGYneLTA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 08/04/2014

Application Dated: 07/25/2014
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5180.0  -  5320.0 0.0266  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. Operation in 5.15-5.35 GHz band is for indoor use only. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application UWVk46Y3R6xZK8pGYneLTA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 08/04/2014

Application Dated: 07/25/2014
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5180.0  -  5320.0 0.0266  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. Operation in 5.15-5.35 GHz band is for indoor use only. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application Reak9m2TF/Jx7lalaHJoyA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 03/17/2017

Application Dated: 01/31/2017
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO ND 15E 5180.0  -  5320.0 0.0266  
38 CC MO ND 15E 5500.0  -  5700.0 0.0429  
38 CC MO 15E 5745.0  -  5825.0 0.035  

Class II Permissive Change to add the W56 band(Applied for following one antenna only: ANTDP-027A0). Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application Reak9m2TF/Jx7lalaHJoyA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 03/17/2017

Application Dated: 01/31/2017
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO ND 15E 5180.0  -  5320.0 0.0266  
38 CC MO ND 15E 5500.0  -  5700.0 0.0429  
38 CC MO 15E 5745.0  -  5825.0 0.035  

Class II Permissive Change to add the W56 band(Applied for following one antenna only: ANTDP-027A0). Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application mfayCVEOdOLxLipug48w4A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CKC Certification Services, LLC
5046 Sierra Pines
Mariposa, CA 95338
Date of Grant: 06/30/2014

Application Dated: 06/27/2014
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15C 5745.0  -  5825.0 0.3456  

Class II Permissive Change to add specific antenna described in the filing. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application mfayCVEOdOLxLipug48w4A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 06/30/2014

Application Dated: 06/27/2014
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 CC 15C 5745.0  -  5825.0 0.3456  

Class II Permissive Change to add specific antenna described in the filing. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application mcALDYEnzw3wQB/hCkgGpQ==

This application does not exist.

EAS Grant - Application mcALDYEnzw3wQB/hCkgGpQ==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
  Date of Grant: 12/14/2012

Application Dated: 10/12/2012
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15E 5180.0  -  5320.0 0.0266  

Modular approval. Output power is conducted. This device has 20 MHz and 40 MHz BW modes. Operation in 5.15-5.25 GHz band is for indoor use only. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application lTcsSRrBTPIuR6hLxGokqw==

Mail To:
Yoshinobu Asai, Team Leader
UL Japan, Inc.
4383-326 Asama-cho, Ise-shi
Mie-ken, 516-0021
Japan
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 08/04/2014

Application Dated: 07/25/2014
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.5516  
CC MO 15C 5745.0  -  5825.0 0.3456  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application lTcsSRrBTPIuR6hLxGokqw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 08/04/2014

Application Dated: 07/25/2014
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.5516  
CC MO 15C 5745.0  -  5825.0 0.3456  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application FvXVI5Q2wgf51I5+mwSGBA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 11/03/2016

Application Dated: 11/03/2016
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO ND 15E 5180.0  -  5320.0 0.0266  
38 CC MO 15E 5745.0  -  5825.0 0.035  

Class II Permissive Change based on FCC14-30. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Note 38 can be applied for following three antennas only: ANTDP-027A0, ANT1267-164C/U-100B and AA222.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application FvXVI5Q2wgf51I5+mwSGBA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 11/03/2016

Application Dated: 11/03/2016
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO ND 15E 5180.0  -  5320.0 0.0266  
38 CC MO 15E 5745.0  -  5825.0 0.035  

Class II Permissive Change based on FCC14-30. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Note 38 can be applied for following three antennas only: ANTDP-027A0, ANT1267-164C/U-100B and AA222.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application ex7VSTvMM36KZI0HAJ/Zpw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CKC Certification Services, LLC
5046 Sierra Pines
Mariposa, CA 95338
Date of Grant: 06/27/2014

Application Dated: 06/24/2014
Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.5516  
CC MO 15C 5745.0  -  5825.0 0.3456  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application ex7VSTvMM36KZI0HAJ/Zpw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai, Seika-cho, Soraku-gun
Kyoto, 619-0237
Japan
  Date of Grant: 06/27/2014

Application Dated: 06/24/2014
 
Attention: Yoshinori Nakai , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.5516  
CC MO 15C 5745.0  -  5825.0 0.3456  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application C4NByq2PBLoueTDZh+LzrA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 06/03/2013

Application Dated: 06/02/2013
Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.5516  
CC MO 15C 5745.0  -  5825.0 0.3456  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application C4NByq2PBLoueTDZh+LzrA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
  Date of Grant: 06/03/2013

Application Dated: 06/02/2013
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.5516  
CC MO 15C 5745.0  -  5825.0 0.3456  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application /BEOG8t/fS0TiXY78+TONQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 06/03/2013

Application Dated: 06/02/2013
Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5180.0  -  5320.0 0.0266  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application /BEOG8t/fS0TiXY78+TONQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silex Technology, Inc.
2-3-1 Hikaridai,Seika-cho Sourakugun
Kyoto, 619-0237
Japan
  Date of Grant: 06/03/2013

Application Dated: 06/02/2013
 
Attention: Toshiro Kometani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N6C-SXPCEAN
Name of Grantee:  Silex Technology, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN PCI Express Mini Card Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5180.0  -  5320.0 0.0266  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted. This device has a 20 MHz and 40 MHz bandwidth mode. For professional installation only - device cannot be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: