FCC ID N6C-SXPCEAN2
PCI Express Half mini card WLAN module
by Silex Technology, Inc.
Grantee Code: N6C Product Code: SXPCEAN2
Latest application date: 2023-04-19
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2023-04-19 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2021-04-20 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2021-04-20 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2018-05-31 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2018-01-16 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2017-09-28 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2017-09-28 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2016-11-30 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2016-11-11 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2016-11-11 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-19 |
| 2412-2462 MHz | Original Equipment | 2015-08-13 |
| 5180-5320 MHz | Original Equipment | 2015-08-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| 04 User Manual | Users Manual | 2021-04-20 | PDF 392.4 KB |
| User manual | Users Manual | 2015-08-13 | PDF 60 KB |
| Users manual | Users Manual | 2015-08-13 | PDF 60 KB |
| Internal Photos (Module and Antenna) | Internal Photos | 2018-05-31 | PDF 637.5 KB |
| Internal Photos | Internal Photos | 2018-01-16 | PDF 372 KB |
| Internal photos | Internal Photos | 2015-08-13 | PDF 443.4 KB |
| 04 Short-Term Confidential_External Photo | External Photos | 2023-10-17 | PDF 169 KB |
| External Photos (Module and Antenna) | External Photos | 2018-05-31 | PDF 637.5 KB |
| External Photos | External Photos | 2018-01-16 | PDF 372 KB |
| 04 External Photo | External Photos | 2017-09-28 | PDF 216.1 KB |
| Antenna photos(Original and this C2PC) | External Photos | 2016-11-30 | PDF 58.8 KB |
| External Photo | External Photos | 2016-11-11 | PDF 31.9 KB |
| Exernal photos | External Photos | 2015-08-13 | PDF 443.8 KB |
| External photos | External Photos | 2015-08-13 | PDF 443.8 KB |
| ID Label & location | ID Label/Location Info | 2015-08-13 | PDF 283.4 KB |
| ID label & location | ID Label/Location Info | 2015-08-13 | PDF 283.4 KB |
| 03 Short-Term Confidential_FCC Test Setup Photo_DTS | Test Setup Photos | 2023-10-17 | PDF 297.3 KB |
| Test Setup Photos | Test Setup Photos | 2018-05-31 | PDF 251.7 KB |
| Test Setup Photos | Test Setup Photos | 2018-01-16 | PDF 253 KB |
| 03 FCC DFS Setup Photo | Test Setup Photos | 2017-09-28 | PDF 255.4 KB |
| 03 FCC Test Setup Photo_DTS | Test Setup Photos | 2017-09-28 | PDF 772.6 KB |
| 03 FCC Test Setup Photo_NII | Test Setup Photos | 2017-09-28 | PDF 853.4 KB |
| Test setup photos (DFS) | Test Setup Photos | 2016-11-30 | PDF 357.3 KB |
| Test setup photos (RF Original) | Test Setup Photos | 2016-11-30 | PDF 511.1 KB |
| Test setup photos for Note code 38 | Test Setup Photos | 2016-11-30 | PDF 818.9 KB |
| FCC Test Setup Photo_DTS | Test Setup Photos | 2016-11-11 | PDF 779.1 KB |
| FCC Test Setup Photo_NII | Test Setup Photos | 2016-11-11 | PDF 818.9 KB |
| FCC Test Setup Photo_NII | Test Setup Photos | 2016-05-19 | PDF 351.8 KB |
| Test setup photos | Test Setup Photos | 2015-08-13 | PDF 511.5 KB |
| Test setup photos(NII) | Test Setup Photos | 2015-08-13 | PDF 511.1 KB |
| 03 Antenna List_FCC | Test Report | 2023-04-19 | PDF 132.9 KB |
| 03 Antenna Specification | Test Report | 2023-04-19 | PDF 156.5 KB |
| 03 Antenna Specification_Cable | Test Report | 2023-04-19 | PDF 616.4 KB |
| 03 FCC Test Report_DTS | Test Report | 2023-04-19 | PDF 1.1 MB |
| DTS Test Report | Test Report | 2018-05-31 | PDF 1 MB |
| NII Test Report | Test Report | 2018-01-16 | PDF 3.8 MB |
| 03 FCC DFS Report | Test Report | 2017-09-28 | PDF 769 KB |
| 03 FCC Test Report_DTS | Test Report | 2017-09-28 | PDF 528.3 KB |
| 03 FCC Test Report_NII | Test Report | 2017-09-28 | PDF 684.7 KB |
| Test report (DFS) | Test Report | 2016-11-30 | PDF 1.1 MB |
| Test report (RF Original) | Test Report | 2016-11-30 | PDF 5 MB |
| Test report for Note code 38 | Test Report | 2016-11-30 | PDF 575.5 KB |
| FCC Test Report_DTS | Test Report | 2016-11-11 | PDF 440.6 KB |
| FCC Test Report_NII | Test Report | 2016-11-11 | PDF 575.5 KB |
| FCC Test Report_NII | Test Report | 2016-05-19 | PDF 1 MB |
| Test report(DTS) | Test Report | 2015-08-13 | PDF 2.6 MB |
| Test report(NII) | Test Report | 2015-08-13 | PDF 5 MB |
| 01 FCC 2.911(d)(5) Attestation | Attestation Statements | 2023-04-19 | PDF 53.8 KB |
| 01 FCC Agent Attestation_Agent | Attestation Statements | 2023-04-19 | PDF 893.5 KB |
| 01 FCC Agent Attestation_Applicant | Attestation Statements | 2023-04-19 | PDF 68.9 KB |
| 02 FCC Authorization Letter | Cover Letter(s) | 2023-04-19 | PDF 66.5 KB |
| 02 FCC Class II Permissive Change Letter | Cover Letter(s) | 2023-04-19 | PDF 113.4 KB |
| 02 FCC Declaration of Professional Installation_module2 | Cover Letter(s) | 2023-04-19 | PDF 45.1 KB |
| 02 FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 2023-04-19 | PDF 52.9 KB |
| 02 FCC Authorization | Cover Letter(s) | 2021-04-20 | PDF 78 KB |
| 02 FCC Class II Permissive Change Letter | Cover Letter(s) | 2021-04-20 | PDF 107.4 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2018-05-31 | PDF 215.5 KB |
| Product Certification Representative Auth Letter | Cover Letter(s) | 2018-05-31 | PDF 201.2 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2018-01-16 | PDF 294.1 KB |
| Product Certification Representative Auth Letter | Cover Letter(s) | 2018-01-16 | PDF 342.5 KB |
| 02 FCC Authorization Letter | Cover Letter(s) | 2017-09-28 | PDF 194.2 KB |
| 02 FCC Class II Permissive Change Letter | Cover Letter(s) | 2017-09-28 | PDF 446.8 KB |
| 02 FCC Declaration of Professional Installation | Cover Letter(s) | 2017-09-28 | PDF 139.6 KB |
| 02 FCC Request for Confidentiality Letter | Cover Letter(s) | 2017-09-28 | PDF 156.4 KB |
| Authorization letter | Cover Letter(s) | 2016-11-30 | PDF 162.9 KB |
| C2PC letter | Cover Letter(s) | 2016-11-30 | PDF 161.3 KB |
| Confidentiality letter | Cover Letter(s) | 2016-11-30 | PDF 134.4 KB |
| Professional installation letter | Cover Letter(s) | 2016-11-30 | PDF 131.8 KB |
| FCC Authorization Letter(SX-PCEAN2) | Cover Letter(s) | 2016-11-11 | PDF 163.5 KB |
| FCC Class II Permissive Change Letter(SX-PCEAN2) | Cover Letter(s) | 2016-11-11 | PDF 233.4 KB |
| FCC Declaration of Professional Installation(SX-PCEAN2) | Cover Letter(s) | 2016-11-11 | PDF 132.6 KB |
| FCC Request for Confidentiality Letter(SX-PCEAN2) | Cover Letter(s) | 2016-11-11 | PDF 137.3 KB |
| FCC Authorization Letter | Cover Letter(s) | 2016-05-19 | PDF 297.2 KB |
| FCC Class II Permissive Change Letter | Cover Letter(s) | 2016-05-19 | PDF 384.8 KB |
| FCC Request for Confidentiality Letter | Cover Letter(s) | 2016-05-19 | PDF 273 KB |
| Authorization letter | Cover Letter(s) | 2015-08-13 | PDF 170.8 KB |
| Confidentiality letter | Cover Letter(s) | 2015-08-13 | PDF 145.2 KB |
| Declaration letter for new and old rule | Cover Letter(s) | 2015-08-13 | PDF 137.1 KB |
| MA letter | Cover Letter(s) | 2015-08-13 | PDF 307.7 KB |
| Professional installation letter | Cover Letter(s) | 2015-08-13 | PDF 119.5 KB |
| 03 FCC RF Exposure | RF Exposure Info | 2023-04-19 | PDF 129.2 KB |
| 03 FCC RF Exposure | RF Exposure Info | 2021-04-20 | PDF 16.5 KB |
| MPE Calculation | RF Exposure Info | 2018-01-16 | PDF 93.8 KB |
| FCC RF Exposure_DTS | RF Exposure Info | 2016-11-11 | PDF 16.7 KB |
| RF EX(DTS) | RF Exposure Info | 2015-08-13 | PDF 56.8 KB |
| RF EX(NII) | RF Exposure Info | 2015-08-13 | PDF 57.7 KB |
| Block diagram RF Metadata only | Block Diagram | PDF 252.2 KB | |
| Schematics Metadata only | Schematics | PDF 809.1 KB | |
| (Confidential) Theory of Operation-Software Security Metadata only | Operational Description | PDF 22.7 KB | |
| (Confidential) Theory operation_Antenna Specification_ANTDC-081A0 Metadata only | Operational Description | PDF 104.6 KB | |
| (Confidential) Theory operation_Antenna list_FCC Metadata only | Operational Description | PDF 16.4 KB | |
| (Confidential) Theory operation_Software Security Metadata only | Operational Description | PDF 23 KB | |
| 05 (Confidential) Theory of Operation-Antenna Specification Metadata only | Operational Description | PDF 157.3 KB | |
| 05 (Confidential) Theory of Operation-Antenna configuration Metadata only | Operational Description | PDF 409.7 KB | |
| 05 (Confidential) Theory of Operation-Antenna list Metadata only | Operational Description | PDF 16.6 KB | |
| 05 (Confidential) Theory of Operation-Software Security Metadata only | Operational Description | PDF 87.6 KB | |
| Expedited request (include specification) Metadata only | Operational Description | PDF 307.4 KB | |
| Expedited review request(include spec) Metadata only | Operational Description | PDF 307.4 KB | |
| Expedited review request(include specification) Metadata only | Operational Description | PDF 307.4 KB | |
| Operational description(Antenna list) Metadata only | Operational Description | PDF 16.4 KB | |
| Operational description(Antenna) Metadata only | Operational Description | PDF 786.5 KB | |
| Operational description(Interface) Metadata only | Operational Description | PDF 581.2 KB | |
| Operational description(Security) Metadata only | Operational Description | PDF 1 MB | |
| Operational description(Security) Metadata only | Operational Description | PDF 22.9 KB | |
| Operational description(Security_Rev01) Metadata only | Operational Description | PDF 101.9 KB | |
| Operational description(Spec1) Metadata only | Operational Description | PDF 1.8 MB | |
| Operational description(Spec2) Metadata only | Operational Description | PDF 3.1 MB | |
| Operational description(interface) Metadata only | Operational Description | PDF 581.2 KB | |
| Oprational description(Antenna) Metadata only | Operational Description | PDF 786.5 KB | |
| expedited review request(Include Specification) Metadata only | Operational Description | PDF 307.4 KB | |
| Parts list Metadata only | Parts List/Tune Up Info | PDF 248.3 KB |
Application Information
| Application ID | FoiiqOsherTFouE1IWK2Yw== |
|---|---|
| Final Action Date | 2023-04-19 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013616305 |
| Model | SXPCEAN2 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | PCI Express Half mini card WLAN module |
| Responsible Party | Yoshinori Nakai, General Manager, nakai@silex.jp  , 81 774-98-3781 |
| Agent | Akiko Akiko Akiko, UL Japan, Inc., Akiko.Nishimura@ul.com  , 81-596-24-8999 |
| Technical Contact | Satofumi Matsuyama, UL Japan, Inc., Satofumi.Matsuyama@ul.com , 81-596-24-8999 |
| Test Firm | Takayuki Shimada, UL Japan, Inc.(Ise), Takayuki.Shimada@ul.com , 81-596-24-8999 |
| TCB Email | LST.FRE.CertNotice@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 10/17/2023 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures except the conditions shown in this filing. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| FoiiqOsherTFouE1IWK2Yw== | 2023-04-19 | Class II permissive change or modification of presently authorized equipment |
| wr1fcPpASxsPMydBwX9IzA== | 2021-04-20 | Class II permissive change or modification of presently authorized equipment |
| macJevP/vO1Iq/SH1Bc/TA== | 2021-04-20 | Class II permissive change or modification of presently authorized equipment |
| JOvQK4iqERqzEZBJMASpAQ== | 2018-05-31 | Class II permissive change or modification of presently authorized equipment |
| Mq7MS6tBJ48MXU661hzMow== | 2018-01-16 | Class II permissive change or modification of presently authorized equipment |
| XAnA/ac6cAWcUy5rlPKNCA== | 2017-09-28 | Class II permissive change or modification of presently authorized equipment |
| DqaFBNstOdAhIBJUNMS/Og== | 2017-09-28 | Class II permissive change or modification of presently authorized equipment |
| QFc9hALENprrm/BT3Qc4Lg== | 2016-11-30 | Class II permissive change or modification of presently authorized equipment |
| K7Mu8O9W644zfk+14orBCg== | 2016-11-11 | Class II permissive change or modification of presently authorized equipment |
| 1un8ArvMvu0wRv8MyXY9rw== | 2016-11-11 | Class II permissive change or modification of presently authorized equipment |
| 4Ce4wXl+wQxFrebVXXA4oA== | 2016-05-19 | Class II permissive change or modification of presently authorized equipment |
| yEkg4hGqlGyUr02BKv9GbQ== | 2015-08-13 | Original Equipment |
| kYJc4Po8LisNADjDrbF7nQ== | 2015-08-13 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2412-2462 MHz | 0.5837000 | 15C | CC, MO |
| 2412-2462 MHz | 0.5837 | 15C | CC, MO |
| 5180-5320 MHz | 0.0485 | 15E | 38, CC, MO, ND |
| 5180-5320 MHz | 0.0485 | 15E | 39, CC, MO, ND |
| 5180-5320 MHz | 0.0485 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.0426 | 15E | 38, CC, MO, ND |
| 5500-5700 MHz | 0.0426 | 15E | 39, CC, MO, ND |
| 5500-5700 MHz | 0.0426 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.3729 | 15C | 39, CC, MO |
| 5745-5825 MHz | 0.0458 | 15E | 38, CC, MO |
| 5745-5825 MHz | 0.0458 | 15E | CC, MO |
Grants
TCB Grant - Application yEkg4hGqlGyUr02BKv9GbQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 08/13/2015 Application Dated: 05/01/2015 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 | ||
| 39 CC MO | 15C | 5745.0 - 5825.0 | 0.3729 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 39: | This sub-band complies with the new rules for U-NII devices adopted under Docket No. 13-49. This device may not be sold or marketed after June 1, 2016, unless all grant-listed U-NII sub-bands demonstrate compliance with Docket No. 13-49. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application yEkg4hGqlGyUr02BKv9GbQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 08/13/2015 Application Dated: 05/01/2015 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 | ||
| 39 CC MO | 15C | 5745.0 - 5825.0 | 0.3729 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 39: | This sub-band complies with the new rules for U-NII devices adopted under Docket No. 13-49. This device may not be sold or marketed after June 1, 2016, unless all grant-listed U-NII sub-bands demonstrate compliance with Docket No. 13-49. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 09/28/2017 Application Dated: 09/11/2017 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 |
| Class II Permissive Change to add specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application XAnA/ac6cAWcUy5rlPKNCA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 09/28/2017 Application Dated: 09/11/2017 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 |
| Class II Permissive Change to add specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/20/2021 Application Dated: 04/19/2021 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 |
| Class II Permissive Change to allow simultaneous transmission evaluation with another SX-PCEAN2 wireless module (FCC ID: N6C-SXPCEAN2). Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures except the conditions shown in this filing. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application wr1fcPpASxsPMydBwX9IzA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 04/20/2021 Application Dated: 04/19/2021 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 |
| Class II Permissive Change to allow simultaneous transmission evaluation with another SX-PCEAN2 wireless module (FCC ID: N6C-SXPCEAN2). Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures except the conditions shown in this filing. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 11/30/2016 Application Dated: 11/18/2016 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| Class II Permissive Change to add specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application QFc9hALENprrm/BT3Qc4Lg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 11/30/2016 Application Dated: 11/18/2016 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| Class II Permissive Change to add specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 01/16/2018 Application Dated: 01/16/2018 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| C2PC to add Taoglas Antenna GW.05.0153., 2.4 GHz band is disabled by software. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application Mq7MS6tBJ48MXU661hzMow==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 01/16/2018 Application Dated: 01/16/2018 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| C2PC to add Taoglas Antenna GW.05.0153., 2.4 GHz band is disabled by software. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/20/2021 Application Dated: 04/19/2021 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| Class II Permissive Change to allow simultaneous transmission evaluation with another SX-PCEAN2 wireless module (FCC ID: N6C-SXPCEAN2). Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures except the conditions shown in this filing. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application macJevP/vO1Iq/SH1Bc/TA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 04/20/2021 Application Dated: 04/19/2021 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| Class II Permissive Change to allow simultaneous transmission evaluation with another SX-PCEAN2 wireless module (FCC ID: N6C-SXPCEAN2). Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures except the conditions shown in this filing. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 08/13/2015 Application Dated: 05/01/2015 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 39 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 39 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 39: | This sub-band complies with the new rules for U-NII devices adopted under Docket No. 13-49. This device may not be sold or marketed after June 1, 2016, unless all grant-listed U-NII sub-bands demonstrate compliance with Docket No. 13-49. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application kYJc4Po8LisNADjDrbF7nQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 08/13/2015 Application Dated: 05/01/2015 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 39 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 39 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 39: | This sub-band complies with the new rules for U-NII devices adopted under Docket No. 13-49. This device may not be sold or marketed after June 1, 2016, unless all grant-listed U-NII sub-bands demonstrate compliance with Docket No. 13-49. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 11/11/2016 Application Dated: 11/11/2016 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| Class II Permissive Change to add client mode and specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device except antenna(ANTDC-081A0). Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application K7Mu8O9W644zfk+14orBCg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 11/11/2016 Application Dated: 11/11/2016 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| Class II Permissive Change to add client mode and specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device except antenna(ANTDC-081A0). Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 05/31/2018 Application Dated: 05/31/2018 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 |
| C2PC to add 855724 Inwave WLAN-Kazaar 03019 Antenna, 5GHz bands are disabled through software. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application JOvQK4iqERqzEZBJMASpAQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 05/31/2018 Application Dated: 05/31/2018 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 |
| C2PC to add 855724 Inwave WLAN-Kazaar 03019 Antenna, 5GHz bands are disabled through software. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/19/2023 Application Dated: 04/19/2023 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 |
| Class II Permissive Change to add specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures except the conditions shown in this filing. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application FoiiqOsherTFouE1IWK2Yw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 04/19/2023 Application Dated: 04/19/2023 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 |
| Class II Permissive Change to add specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures except the conditions shown in this filing. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 09/28/2017 Application Dated: 09/11/2017 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| Class II Permissive Change to add specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application DqaFBNstOdAhIBJUNMS/Og==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 09/28/2017 Application Dated: 09/11/2017 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| Class II Permissive Change to add specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 05/19/2016 Application Dated: 05/19/2016 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| Class II Permissive Change based on FCC14-30. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 4Ce4wXl+wQxFrebVXXA4oA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 05/19/2016 Application Dated: 05/19/2016 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| Class II Permissive Change based on FCC14-30. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 11/11/2016 Application Dated: 11/11/2016 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 |
| Class II Permissive Change to add specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 1un8ArvMvu0wRv8MyXY9rw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 11/11/2016 Application Dated: 11/11/2016 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 |
| Class II Permissive Change to add specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |