FCC ID N6C-SXULPAN
Low power loT wireless LAN module
by Silex Technology, Inc.
Grantee Code: N6C Product Code: SXULPAN
Latest application date: 2015-02-09
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5320 MHz | Original Equipment | 2015-02-09 |
| 2412-2462 MHz | Original Equipment | 2015-02-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| (Short-Term Confidential) Users_Manual | Users Manual | 2015-08-08 | PDF 61.9 KB |
| (Short-Term Confidential) Internal Photo | Internal Photos | 2015-08-08 | PDF 22.3 KB |
| (Short-Term Confidential) External Photo | External Photos | 2015-08-08 | PDF 65.9 KB |
| Label & Location | ID Label/Location Info | 2015-02-09 | PDF 46.3 KB |
| (Short-Term Confidential) FCC Test Setup Photo_15.247 | Test Setup Photos | 2015-08-08 | PDF 1.3 MB |
| (Short-Term Confidential) FCC Test Setup Photo_15.407 | Test Setup Photos | 2015-08-08 | PDF 649.8 KB |
| (Short-Term Confidential) FCC Test Setup Photo_15.407 (DFS only) | Test Setup Photos | 2015-08-08 | PDF 255.1 KB |
| FCC Report_15.247 | Test Report | 2015-02-09 | PDF 887.8 KB |
| FCC Report_15.407 | Test Report | 2015-02-09 | PDF 1.6 MB |
| FCC Report_15.407 (DFS only) | Test Report | 2015-02-09 | PDF 643.8 KB |
| FCC Authorization Letter | Cover Letter(s) | 2015-02-09 | PDF 89.9 KB |
| FCC Declaration Letter of W58_Old rule or New rule | Cover Letter(s) | 2015-02-09 | PDF 380.5 KB |
| FCC MA Letter | Cover Letter(s) | 2015-02-09 | PDF 184.3 KB |
| FCC Request for Confidentiality Letter | Cover Letter(s) | 2015-02-09 | PDF 81.5 KB |
| FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 2015-02-09 | PDF 85.5 KB |
| FCC RF Exposure sheet_15.247 | RF Exposure Info | 2015-02-09 | PDF 57.3 KB |
| FCC RF Exposure sheet_15.407 | RF Exposure Info | 2015-02-09 | PDF 57.4 KB |
| (Confidential) Block Diagram Metadata only | Block Diagram | PDF 287.4 KB | |
| (Confidential) Schematics Metadata only | Schematics | PDF 1 MB | |
| (Confidential) Theory of Operation-Antenna Specification_H2B1PC1A1C Metadata only | Operational Description | PDF 1.8 MB | |
| (Confidential) Theory of Operation-Antenna Specification_SXANTFDB24A55 Metadata only | Operational Description | PDF 1.1 MB | |
| (Confidential) Theory of Operation-Antenna_list Metadata only | Operational Description | PDF 203.4 KB | |
| (Confidential) Theory of Operation-Interface Specification Metadata only | Operational Description | PDF 714.6 KB | |
| (Confidential) Theory of Operation-Security_Requirement_for_U-NII_Devices Metadata only | Operational Description | PDF 225.9 KB | |
| (Confidential) Theory of Operation-Specification Metadata only | Operational Description | PDF 2.8 MB | |
| (Confidential) Parts List Metadata only | Parts List/Tune Up Info | PDF 240.4 KB |
Application Information
| Application ID | rhAFd8nXdlRfZk7m/IGuUQ== |
|---|---|
| Final Action Date | 2015-02-09 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0013616305 |
| Model | SXULPAN |
| Frequency Range | 5180-5320 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Low power loT wireless LAN module |
| Responsible Party | Yoshinori Nakai, General Manager, nakai@silex.jp  , 81 774-98-3781 |
| Agent | Yoshihisa Yoshihisa Yoshihisa, UL Japan, Inc., Yoshihisa.Maeda@ul.com  , 81-596-24-8116 |
| Technical Contact | Takahiro Hatakeda, UL Japan, Inc., Takahiro.Hatakeda@ul.com , 81-596-24-8999 |
| Test Firm | Tetsuya Hashimoto, UL Japan, Inc. Head office EMC Lab., Tetsuya.Hashimoto@jp.ul.com  , +81-596-24-8116 |
| TCB Email | emc.jp@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 08/08/2015 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| rhAFd8nXdlRfZk7m/IGuUQ== | 2015-02-09 | Original Equipment |
| cddvi/X3fb0xn1MA+/kZCw== | 2015-02-09 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application rhAFd8nXdlRfZk7m/IGuUQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 02/09/2015 Application Dated: 02/09/2015 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai,Seika-cho Sourakugun |
| Kyoto, 619-0237 Japan |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXULPAN |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Low power loT wireless LAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC ND | 15E | 5180.0 - 5320.0 | 0.0148 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.007 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0031 |
| Single Modular Approval. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured, installed or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application rhAFd8nXdlRfZk7m/IGuUQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai,Seika-cho Sourakugun Kyoto, 619-0237 Japan |
Date of Grant: 02/09/2015 Application Dated: 02/09/2015 |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXULPAN |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Low power loT wireless LAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC ND | 15E | 5180.0 - 5320.0 | 0.0148 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.007 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0031 |
| Single Modular Approval. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured, installed or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 02/09/2015 Application Dated: 02/09/2015 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai,Seika-cho Sourakugun |
| Kyoto, 619-0237 Japan |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXULPAN |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Low power loT wireless LAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2761 |
| Single Modular Approval. Output power listed is Conducted(Peak). Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application cddvi/X3fb0xn1MA+/kZCw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai,Seika-cho Sourakugun Kyoto, 619-0237 Japan |
Date of Grant: 02/09/2015 Application Dated: 02/09/2015 |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXULPAN |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Low power loT wireless LAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2761 |
| Single Modular Approval. Output power listed is Conducted(Peak). Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |