FCC ID N6C-SXPCEAN2
N6CSXPCEAN2, N6C SXPCEAN2, N6C-SXPCEAN2, N6C-5XPCEAN2
Silex Technology, Inc. PCI Express Half mini card WLAN module SXPCEAN2
An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product.
For example, the grantee code for FCC ID: N6C-SXPCEAN2 is N6C. The remaining characters of the FCC ID, -SXPCEAN2, are often associated with the product model, but they can be random. These letters are chosen by the applicant.
In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.
Purchase on Amazon:
PCI Express Half mini card WLAN module
- Application: PCI Express Half mini card WLAN module
- Equipment Class: DTS - Digital Transmission System
- Short Link: fcc.id/N6C-SXPCEAN2
- Sources: FCC.gov | FCC.report
- Registered By: Silex Technology, Inc. - N6C (Japan)
| App # | Purpose | Date | Unique ID |
|---|---|---|---|
| 1 | Original Equipment | 2015-08-13 | kYJc4Po8LisNADjDrbF7nQ== |
| 2 | Original Equipment | 2015-08-13 | yEkg4hGqlGyUr02BKv9GbQ== |
| 3 | Class II Permissive Change | 2016-05-19 | 4Ce4wXl+wQxFrebVXXA4oA== |
| 4 | Class II Permissive Change | 2016-11-11 | 1un8ArvMvu0wRv8MyXY9rw== |
| 5 | Class II Permissive Change | 2016-11-11 | K7Mu8O9W644zfk+14orBCg== |
| 6 | Class II Permissive Change | 2016-11-30 | QFc9hALENprrm/BT3Qc4Lg== |
| 7 | Class II Permissive Change | 2017-09-28 | XAnA/ac6cAWcUy5rlPKNCA== |
| 8 | Class II Permissive Change | 2017-09-28 | DqaFBNstOdAhIBJUNMS/Og== |
| 9 | Class II Permissive Change | 2018-01-16 | Mq7MS6tBJ48MXU661hzMow== |
| 10 | Class II Permissive Change | 2018-05-31 | JOvQK4iqERqzEZBJMASpAQ== |
| 11 | Class II Permissive Change | 2021-04-20 | macJevP/vO1Iq/SH1Bc/TA== |
| 12 | Class II Permissive Change | 2021-04-20 | wr1fcPpASxsPMydBwX9IzA== |
| 13 | Class II Permissive Change | 2023-04-19 | FoiiqOsherTFouE1IWK2Yw== |
Operating Frequencies
Device operates within approved frequencies overlapping with the following cellular bands: LTE 255,Unlicensed NII-3 DOWN | LTE 46,TD Unlicensed DOWN |
Exhibits
Available Exhibits
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 13 | 03 FCC Test Report_DTS | Test Report Adobe Acrobat PDF (1140 kB) |
2023-04-19 2023-04-19 |
| 13 | 03 FCC RF Exposure | RF Exposure Info Adobe Acrobat PDF (129 kB) |
2023-04-19 2023-04-19 |
| 13 | 03 Antenna Specification_Cable | Test Report Adobe Acrobat PDF (616 kB) |
2023-04-19 2023-04-19 |
| 13 | 03 Antenna Specification | Test Report Adobe Acrobat PDF (156 kB) |
2023-04-19 2023-04-19 |
| 13 | 03 Antenna List_FCC | Test Report Adobe Acrobat PDF (132 kB) |
2023-04-19 2023-04-19 |
| 13 | 02 FCC Request for Short-term Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (52 kB) |
2023-04-19 2023-04-19 |
| 13 | 02 FCC Declaration of Professional Installation_module2 | Cover Letter(s) Adobe Acrobat PDF (45 kB) |
2023-04-19 2023-04-19 |
| 13 | 02 FCC Class II Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (113 kB) |
2023-04-19 2023-04-19 |
| 13 | 02 FCC Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (66 kB) |
2023-04-19 2023-04-19 |
| 13 | 01 FCC Agent Attestation_Applicant | Attestation Statements Adobe Acrobat PDF (68 kB) |
2023-04-19 2023-04-19 |
| 13 | 01 FCC Agent Attestation_Agent | Attestation Statements Adobe Acrobat PDF (893 kB) |
2023-04-19 2023-04-19 |
| 13 | 01 FCC 2.911(d)(5) Attestation | Attestation Statements Adobe Acrobat PDF (53 kB) |
2023-04-19 2023-04-19 |
| 11 | 04 User Manual | Users Manual Adobe Acrobat PDF (392 kB) |
2021-04-19 2021-04-20 |
| 11 | 03 FCC RF Exposure | RF Exposure Info Adobe Acrobat PDF (16 kB) |
2021-04-19 2021-04-20 |
| 11 | 02 FCC Class II Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (107 kB) |
2021-04-19 2021-04-20 |
| 11 | 02 FCC Authorization | Cover Letter(s) Adobe Acrobat PDF (78 kB) |
2021-04-19 2021-04-20 |
| 12 | 04 User Manual | Users Manual Adobe Acrobat PDF (392 kB) |
2021-04-19 2021-04-20 |
| 12 | 03 FCC RF Exposure | RF Exposure Info Adobe Acrobat PDF (16 kB) |
2021-04-19 2021-04-20 |
| 12 | 02 FCC Class II Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (107 kB) |
2021-04-19 2021-04-20 |
| 12 | 02 FCC Authorization | Cover Letter(s) Adobe Acrobat PDF (78 kB) |
2021-04-19 2021-04-20 |
| 10 | Internal Photos (Module and Antenna) | Internal Photos Adobe Acrobat PDF (637 kB) |
2018-05-31 2018-05-31 |
| 10 | External Photos (Module and Antenna) | External Photos Adobe Acrobat PDF (637 kB) |
2018-05-31 2018-05-31 |
| 10 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (251 kB) |
2018-05-31 2018-05-31 |
| 10 | DTS Test Report | Test Report Adobe Acrobat PDF (1067 kB) |
2018-05-31 2018-05-31 |
| 10 | Product Certification Representative Auth Letter | Cover Letter(s) Adobe Acrobat PDF (201 kB) |
2018-05-31 2018-05-31 |
| 10 | Class II Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (215 kB) |
2018-05-31 2018-05-31 |
| 9 | MPE Calculation | RF Exposure Info Adobe Acrobat PDF (93 kB) |
2018-01-17 2018-01-16 |
| 9 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (253 kB) |
2018-01-16 2018-01-16 |
| 9 | Internal Photos | Internal Photos Adobe Acrobat PDF (371 kB) |
2018-01-16 2018-01-16 |
| 9 | External Photos | External Photos Adobe Acrobat PDF (371 kB) |
2018-01-16 2018-01-16 |
| 9 | NII Test Report | Test Report Adobe Acrobat PDF (3924 kB) |
2018-01-16 2018-01-16 |
| 9 | Class II Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (294 kB) |
2018-01-16 2018-01-16 |
| 9 | Product Certification Representative Auth Letter | Cover Letter(s) Adobe Acrobat PDF (342 kB) |
2018-01-16 2018-01-16 |
| 8 | 04 External Photo | External Photos Adobe Acrobat PDF (216 kB) |
2017-09-11 2017-09-28 |
| 8 | 03 FCC Test Setup Photo_NII | Test Setup Photos Adobe Acrobat PDF (853 kB) |
2017-09-11 2017-09-28 |
| 8 | 02 FCC Declaration of Professional Installation | Cover Letter(s) Adobe Acrobat PDF (139 kB) |
2017-09-11 2017-09-28 |
| 8 | 02 FCC Class II Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (446 kB) |
2017-09-11 2017-09-28 |
| 8 | 03 FCC Test Report_NII | Test Report Adobe Acrobat PDF (684 kB) |
2017-09-11 2017-09-28 |
| 8 | 03 FCC DFS Setup Photo | Test Setup Photos Adobe Acrobat PDF (255 kB) |
2017-09-11 2017-09-28 |
| 8 | 03 FCC DFS Report | Test Report Adobe Acrobat PDF (769 kB) |
2017-09-11 2017-09-28 |
| 8 | 02 FCC Request for Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (156 kB) |
2017-09-11 2017-09-28 |
| 8 | 02 FCC Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (194 kB) |
2017-09-11 2017-09-28 |
| 7 | 04 External Photo | External Photos Adobe Acrobat PDF (216 kB) |
2017-09-11 2017-09-28 |
| 7 | 03 FCC Test Setup Photo_DTS | Test Setup Photos Adobe Acrobat PDF (772 kB) |
2017-09-11 2017-09-28 |
| 7 | 03 FCC Test Report_DTS | Test Report Adobe Acrobat PDF (528 kB) |
2017-09-11 2017-09-28 |
| 7 | 02 FCC Request for Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (156 kB) |
2017-09-11 2017-09-28 |
| 7 | 02 FCC Declaration of Professional Installation | Cover Letter(s) Adobe Acrobat PDF (139 kB) |
2017-09-11 2017-09-28 |
| 7 | 02 FCC Class II Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (446 kB) |
2017-09-11 2017-09-28 |
| 7 | 02 FCC Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (194 kB) |
2017-09-11 2017-09-28 |
| 6 | Antenna photos(Original and this C2PC) | External Photos Adobe Acrobat PDF (58 kB) |
2016-11-23 2016-11-30 |
| 6 | Test setup photos (RF Original) | Test Setup Photos Adobe Acrobat PDF (511 kB) |
2016-11-23 2016-11-30 |
| 6 | Test report (RF Original) | Test Report Adobe Acrobat PDF (5162 kB) |
2016-11-23 2016-11-30 |
| 6 | Test setup photos (DFS) | Test Setup Photos Adobe Acrobat PDF (357 kB) |
2016-11-23 2016-11-30 |
| 6 | Test report (DFS) | Test Report Adobe Acrobat PDF (1117 kB) |
2016-11-23 2016-11-30 |
| 6 | Test setup photos for Note code 38 | Test Setup Photos Adobe Acrobat PDF (818 kB) |
2016-11-23 2016-11-30 |
| 6 | Test report for Note code 38 | Test Report Adobe Acrobat PDF (575 kB) |
2016-11-23 2016-11-30 |
| 6 | Confidentiality letter | Cover Letter(s) Adobe Acrobat PDF (134 kB) |
2016-11-18 2016-11-30 |
| 6 | Professional installation letter | Cover Letter(s) Adobe Acrobat PDF (131 kB) |
2016-11-18 2016-11-30 |
| 6 | C2PC letter | Cover Letter(s) Adobe Acrobat PDF (161 kB) |
2016-11-18 2016-11-30 |
| 6 | Authorization letter | Cover Letter(s) Adobe Acrobat PDF (162 kB) |
2016-11-18 2016-11-30 |
| 5 | External Photo | External Photos Adobe Acrobat PDF (31 kB) |
2016-11-11 2016-11-11 |
| 5 | FCC Test Setup Photo_NII | Test Setup Photos Adobe Acrobat PDF (818 kB) |
2016-11-11 2016-11-11 |
| 5 | FCC Test Report_NII | Test Report Adobe Acrobat PDF (575 kB) |
2016-11-11 2016-11-11 |
| 5 | FCC Request for Confidentiality Letter(SX-PCEAN2) | Cover Letter(s) Adobe Acrobat PDF (137 kB) |
2016-11-11 2016-11-11 |
| 5 | FCC Declaration of Professional Installation(SX-PCEAN2) | Cover Letter(s) Adobe Acrobat PDF (132 kB) |
2016-11-11 2016-11-11 |
| 5 | FCC Class II Permissive Change Letter(SX-PCEAN2) | Cover Letter(s) Adobe Acrobat PDF (233 kB) |
2016-11-11 2016-11-11 |
| 5 | FCC Authorization Letter(SX-PCEAN2) | Cover Letter(s) Adobe Acrobat PDF (163 kB) |
2016-11-11 2016-11-11 |
| 4 | External Photo | External Photos Adobe Acrobat PDF (31 kB) |
2016-11-11 2016-11-11 |
| 4 | FCC Test Setup Photo_DTS | Test Setup Photos Adobe Acrobat PDF (779 kB) |
2016-11-11 2016-11-11 |
| 4 | FCC Test Report_DTS | Test Report Adobe Acrobat PDF (440 kB) |
2016-11-11 2016-11-11 |
| 4 | FCC RF Exposure_DTS | RF Exposure Info Adobe Acrobat PDF (16 kB) |
2016-11-11 2016-11-11 |
| 4 | FCC Request for Confidentiality Letter(SX-PCEAN2) | Cover Letter(s) Adobe Acrobat PDF (137 kB) |
2016-11-11 2016-11-11 |
| 4 | FCC Declaration of Professional Installation(SX-PCEAN2) | Cover Letter(s) Adobe Acrobat PDF (132 kB) |
2016-11-11 2016-11-11 |
| 4 | FCC Class II Permissive Change Letter(SX-PCEAN2) | Cover Letter(s) Adobe Acrobat PDF (233 kB) |
2016-11-11 2016-11-11 |
| 4 | FCC Authorization Letter(SX-PCEAN2) | Cover Letter(s) Adobe Acrobat PDF (163 kB) |
2016-11-11 2016-11-11 |
| 3 | FCC Test Setup Photo_NII | Test Setup Photos Adobe Acrobat PDF (351 kB) |
2016-05-19 2016-05-19 |
| 3 | FCC Test Report_NII | Test Report Adobe Acrobat PDF (1074 kB) |
2016-05-19 2016-05-19 |
| 3 | FCC Request for Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (272 kB) |
2016-05-19 2016-05-19 |
| 3 | FCC Class II Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (384 kB) |
2016-05-19 2016-05-19 |
| 3 | FCC Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (297 kB) |
2016-05-19 2016-05-19 |
| 2 | ID Label & location | ID Label/Location Info Adobe Acrobat PDF (283 kB) |
2015-05-01 2015-08-13 |
| 2 | Users manual | Users Manual Adobe Acrobat PDF (60 kB) |
2015-05-01 2015-08-13 |
| 2 | Internal photos | Internal Photos Adobe Acrobat PDF (443 kB) |
2015-05-01 2015-08-13 |
| 2 | Exernal photos | External Photos Adobe Acrobat PDF (443 kB) |
2015-05-01 2015-08-13 |
| 2 | RF EX(DTS) | RF Exposure Info Adobe Acrobat PDF (56 kB) |
2015-05-01 2015-08-13 |
| 2 | Test setup photos | Test Setup Photos Adobe Acrobat PDF (511 kB) |
2015-05-01 2015-08-13 |
| 2 | Test report(DTS) | Test Report Adobe Acrobat PDF (2667 kB) |
2015-05-01 2015-08-13 |
| 2 | Confidentiality letter | Cover Letter(s) Adobe Acrobat PDF (145 kB) |
2015-05-01 2015-08-13 |
| 2 | Professional installation letter | Cover Letter(s) Adobe Acrobat PDF (119 kB) |
2015-05-01 2015-08-13 |
| 2 | MA letter | Cover Letter(s) Adobe Acrobat PDF (307 kB) |
2015-05-01 2015-08-13 |
| 2 | Declaration letter for new and old rule | Cover Letter(s) Adobe Acrobat PDF (137 kB) |
2015-05-01 2015-08-13 |
| 2 | Authorization letter | Cover Letter(s) Adobe Acrobat PDF (170 kB) |
2015-05-01 2015-08-13 |
| 1 | ID label & location | ID Label/Location Info Adobe Acrobat PDF (283 kB) |
2015-05-01 2015-08-13 |
| 1 | User manual | Users Manual Adobe Acrobat PDF (60 kB) |
2015-05-01 2015-08-13 |
| 1 | Internal photos | Internal Photos Adobe Acrobat PDF (443 kB) |
2015-05-01 2015-08-13 |
| 1 | External photos | External Photos Adobe Acrobat PDF (443 kB) |
2015-05-01 2015-08-13 |
| 1 | RF EX(NII) | RF Exposure Info Adobe Acrobat PDF (57 kB) |
2015-05-01 2015-08-13 |
| 1 | Test setup photos(NII) | Test Setup Photos Adobe Acrobat PDF (511 kB) |
2015-05-01 2015-08-13 |
| 1 | Test report(NII) | Test Report Adobe Acrobat PDF (5145 kB) |
2015-05-01 2015-08-13 |
| 1 | Test setup photos(DFS) | Test Setup Photos Adobe Acrobat PDF (357 kB) |
2015-05-01 2015-08-13 |
| 1 | Test report(DFS) | Test Report Adobe Acrobat PDF (1117 kB) |
2015-05-01 2015-08-13 |
| 1 | Confidentiality letter | Cover Letter(s) Adobe Acrobat PDF (145 kB) |
2015-05-01 2015-08-13 |
| 1 | Professional installation letter | Cover Letter(s) Adobe Acrobat PDF (119 kB) |
2015-05-01 2015-08-13 |
| 1 | MA letter | Cover Letter(s) Adobe Acrobat PDF (307 kB) |
2015-05-01 2015-08-13 |
| 1 | Declaration letter for new and old rule | Cover Letter(s) Adobe Acrobat PDF (137 kB) |
2015-05-01 2015-08-13 |
| 1 | Authorization letter | Cover Letter(s) Adobe Acrobat PDF (170 kB) |
2015-05-01 2015-08-13 |
APP # 13 (2023-04-19)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 13 | 03 FCC Test Report_DTS | Test Report Adobe Acrobat PDF (1140 kB) |
2023-04-19 00:00:00 2023-04-19 00:00:00 |
| 13 | 03 FCC RF Exposure | RF Exposure Info Adobe Acrobat PDF (129 kB) |
2023-04-19 00:00:00 2023-04-19 00:00:00 |
| 13 | 03 Antenna Specification_Cable | Test Report Adobe Acrobat PDF (616 kB) |
2023-04-19 00:00:00 2023-04-19 00:00:00 |
| 13 | 03 Antenna Specification | Test Report Adobe Acrobat PDF (156 kB) |
2023-04-19 00:00:00 2023-04-19 00:00:00 |
| 13 | 03 Antenna List_FCC | Test Report Adobe Acrobat PDF (132 kB) |
2023-04-19 00:00:00 2023-04-19 00:00:00 |
| 13 | 02 FCC Request for Short-term Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (52 kB) |
2023-04-19 00:00:00 2023-04-19 00:00:00 |
| 13 | 02 FCC Declaration of Professional Installation_module2 | Cover Letter(s) Adobe Acrobat PDF (45 kB) |
2023-04-19 00:00:00 2023-04-19 00:00:00 |
| 13 | 02 FCC Class II Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (113 kB) |
2023-04-19 00:00:00 2023-04-19 00:00:00 |
| 13 | 02 FCC Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (66 kB) |
2023-04-19 00:00:00 2023-04-19 00:00:00 |
| 13 | 01 FCC Agent Attestation_Applicant | Attestation Statements Adobe Acrobat PDF (68 kB) |
2023-04-19 00:00:00 2023-04-19 00:00:00 |
| 13 | 01 FCC Agent Attestation_Agent | Attestation Statements Adobe Acrobat PDF (893 kB) |
2023-04-19 00:00:00 2023-04-19 00:00:00 |
| 13 | 01 FCC 2.911(d)(5) Attestation | Attestation Statements Adobe Acrobat PDF (53 kB) |
2023-04-19 00:00:00 2023-04-19 00:00:00 |
APP # 11 (2021-04-20)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 11 | 04 User Manual | Users Manual Adobe Acrobat PDF (392 kB) |
2021-04-19 00:00:00 2021-04-20 00:00:00 |
| 11 | 03 FCC RF Exposure | RF Exposure Info Adobe Acrobat PDF (16 kB) |
2021-04-19 00:00:00 2021-04-20 00:00:00 |
| 11 | 02 FCC Class II Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (107 kB) |
2021-04-19 00:00:00 2021-04-20 00:00:00 |
| 11 | 02 FCC Authorization | Cover Letter(s) Adobe Acrobat PDF (78 kB) |
2021-04-19 00:00:00 2021-04-20 00:00:00 |
APP # 12 (2021-04-20)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 12 | 04 User Manual | Users Manual Adobe Acrobat PDF (392 kB) |
2021-04-19 00:00:00 2021-04-20 00:00:00 |
| 12 | 03 FCC RF Exposure | RF Exposure Info Adobe Acrobat PDF (16 kB) |
2021-04-19 00:00:00 2021-04-20 00:00:00 |
| 12 | 02 FCC Class II Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (107 kB) |
2021-04-19 00:00:00 2021-04-20 00:00:00 |
| 12 | 02 FCC Authorization | Cover Letter(s) Adobe Acrobat PDF (78 kB) |
2021-04-19 00:00:00 2021-04-20 00:00:00 |
APP # 10 (2018-05-31)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 10 | Internal Photos (Module and Antenna) | Internal Photos Adobe Acrobat PDF (637 kB) |
2018-05-31 00:00:00 2018-05-31 00:00:00 |
| 10 | External Photos (Module and Antenna) | External Photos Adobe Acrobat PDF (637 kB) |
2018-05-31 00:00:00 2018-05-31 00:00:00 |
| 10 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (251 kB) |
2018-05-31 00:00:00 2018-05-31 00:00:00 |
| 10 | DTS Test Report | Test Report Adobe Acrobat PDF (1067 kB) |
2018-05-31 00:00:00 2018-05-31 00:00:00 |
| 10 | Product Certification Representative Auth Letter | Cover Letter(s) Adobe Acrobat PDF (201 kB) |
2018-05-31 00:00:00 2018-05-31 00:00:00 |
| 10 | Class II Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (215 kB) |
2018-05-31 00:00:00 2018-05-31 00:00:00 |
APP # 9 (2018-01-16)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 9 | MPE Calculation | RF Exposure Info Adobe Acrobat PDF (93 kB) |
2018-01-17 00:00:00 2018-01-16 00:00:00 |
| 9 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (253 kB) |
2018-01-16 00:00:00 2018-01-16 00:00:00 |
| 9 | Internal Photos | Internal Photos Adobe Acrobat PDF (371 kB) |
2018-01-16 00:00:00 2018-01-16 00:00:00 |
| 9 | External Photos | External Photos Adobe Acrobat PDF (371 kB) |
2018-01-16 00:00:00 2018-01-16 00:00:00 |
| 9 | NII Test Report | Test Report Adobe Acrobat PDF (3924 kB) |
2018-01-16 00:00:00 2018-01-16 00:00:00 |
| 9 | Class II Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (294 kB) |
2018-01-16 00:00:00 2018-01-16 00:00:00 |
| 9 | Product Certification Representative Auth Letter | Cover Letter(s) Adobe Acrobat PDF (342 kB) |
2018-01-16 00:00:00 2018-01-16 00:00:00 |
APP # 8 (2017-09-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 8 | 04 External Photo | External Photos Adobe Acrobat PDF (216 kB) |
2017-09-11 00:00:00 2017-09-28 00:00:00 |
| 8 | 03 FCC Test Setup Photo_NII | Test Setup Photos Adobe Acrobat PDF (853 kB) |
2017-09-11 00:00:00 2017-09-28 00:00:00 |
| 8 | 02 FCC Declaration of Professional Installation | Cover Letter(s) Adobe Acrobat PDF (139 kB) |
2017-09-11 00:00:00 2017-09-28 00:00:00 |
| 8 | 02 FCC Class II Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (446 kB) |
2017-09-11 00:00:00 2017-09-28 00:00:00 |
| 8 | 03 FCC Test Report_NII | Test Report Adobe Acrobat PDF (684 kB) |
2017-09-11 00:00:00 2017-09-28 00:00:00 |
| 8 | 03 FCC DFS Setup Photo | Test Setup Photos Adobe Acrobat PDF (255 kB) |
2017-09-11 00:00:00 2017-09-28 00:00:00 |
| 8 | 03 FCC DFS Report | Test Report Adobe Acrobat PDF (769 kB) |
2017-09-11 00:00:00 2017-09-28 00:00:00 |
| 8 | 02 FCC Request for Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (156 kB) |
2017-09-11 00:00:00 2017-09-28 00:00:00 |
| 8 | 02 FCC Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (194 kB) |
2017-09-11 00:00:00 2017-09-28 00:00:00 |
APP # 7 (2017-09-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 7 | 04 External Photo | External Photos Adobe Acrobat PDF (216 kB) |
2017-09-11 00:00:00 2017-09-28 00:00:00 |
| 7 | 03 FCC Test Setup Photo_DTS | Test Setup Photos Adobe Acrobat PDF (772 kB) |
2017-09-11 00:00:00 2017-09-28 00:00:00 |
| 7 | 03 FCC Test Report_DTS | Test Report Adobe Acrobat PDF (528 kB) |
2017-09-11 00:00:00 2017-09-28 00:00:00 |
| 7 | 02 FCC Request for Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (156 kB) |
2017-09-11 00:00:00 2017-09-28 00:00:00 |
| 7 | 02 FCC Declaration of Professional Installation | Cover Letter(s) Adobe Acrobat PDF (139 kB) |
2017-09-11 00:00:00 2017-09-28 00:00:00 |
| 7 | 02 FCC Class II Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (446 kB) |
2017-09-11 00:00:00 2017-09-28 00:00:00 |
| 7 | 02 FCC Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (194 kB) |
2017-09-11 00:00:00 2017-09-28 00:00:00 |
APP # 6 (2016-11-30)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 6 | Antenna photos(Original and this C2PC) | External Photos Adobe Acrobat PDF (58 kB) |
2016-11-23 00:00:00 2016-11-30 00:00:00 |
| 6 | Test setup photos (RF Original) | Test Setup Photos Adobe Acrobat PDF (511 kB) |
2016-11-23 00:00:00 2016-11-30 00:00:00 |
| 6 | Test report (RF Original) | Test Report Adobe Acrobat PDF (5162 kB) |
2016-11-23 00:00:00 2016-11-30 00:00:00 |
| 6 | Test setup photos (DFS) | Test Setup Photos Adobe Acrobat PDF (357 kB) |
2016-11-23 00:00:00 2016-11-30 00:00:00 |
| 6 | Test report (DFS) | Test Report Adobe Acrobat PDF (1117 kB) |
2016-11-23 00:00:00 2016-11-30 00:00:00 |
| 6 | Test setup photos for Note code 38 | Test Setup Photos Adobe Acrobat PDF (818 kB) |
2016-11-23 00:00:00 2016-11-30 00:00:00 |
| 6 | Test report for Note code 38 | Test Report Adobe Acrobat PDF (575 kB) |
2016-11-23 00:00:00 2016-11-30 00:00:00 |
| 6 | Confidentiality letter | Cover Letter(s) Adobe Acrobat PDF (134 kB) |
2016-11-18 00:00:00 2016-11-30 00:00:00 |
| 6 | Professional installation letter | Cover Letter(s) Adobe Acrobat PDF (131 kB) |
2016-11-18 00:00:00 2016-11-30 00:00:00 |
| 6 | C2PC letter | Cover Letter(s) Adobe Acrobat PDF (161 kB) |
2016-11-18 00:00:00 2016-11-30 00:00:00 |
| 6 | Authorization letter | Cover Letter(s) Adobe Acrobat PDF (162 kB) |
2016-11-18 00:00:00 2016-11-30 00:00:00 |
APP # 5 (2016-11-11)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 5 | External Photo | External Photos Adobe Acrobat PDF (31 kB) |
2016-11-11 00:00:00 2016-11-11 00:00:00 |
| 5 | FCC Test Setup Photo_NII | Test Setup Photos Adobe Acrobat PDF (818 kB) |
2016-11-11 00:00:00 2016-11-11 00:00:00 |
| 5 | FCC Test Report_NII | Test Report Adobe Acrobat PDF (575 kB) |
2016-11-11 00:00:00 2016-11-11 00:00:00 |
| 5 | FCC Request for Confidentiality Letter(SX-PCEAN2) | Cover Letter(s) Adobe Acrobat PDF (137 kB) |
2016-11-11 00:00:00 2016-11-11 00:00:00 |
| 5 | FCC Declaration of Professional Installation(SX-PCEAN2) | Cover Letter(s) Adobe Acrobat PDF (132 kB) |
2016-11-11 00:00:00 2016-11-11 00:00:00 |
| 5 | FCC Class II Permissive Change Letter(SX-PCEAN2) | Cover Letter(s) Adobe Acrobat PDF (233 kB) |
2016-11-11 00:00:00 2016-11-11 00:00:00 |
| 5 | FCC Authorization Letter(SX-PCEAN2) | Cover Letter(s) Adobe Acrobat PDF (163 kB) |
2016-11-11 00:00:00 2016-11-11 00:00:00 |
APP # 4 (2016-11-11)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 4 | External Photo | External Photos Adobe Acrobat PDF (31 kB) |
2016-11-11 00:00:00 2016-11-11 00:00:00 |
| 4 | FCC Test Setup Photo_DTS | Test Setup Photos Adobe Acrobat PDF (779 kB) |
2016-11-11 00:00:00 2016-11-11 00:00:00 |
| 4 | FCC Test Report_DTS | Test Report Adobe Acrobat PDF (440 kB) |
2016-11-11 00:00:00 2016-11-11 00:00:00 |
| 4 | FCC RF Exposure_DTS | RF Exposure Info Adobe Acrobat PDF (16 kB) |
2016-11-11 00:00:00 2016-11-11 00:00:00 |
| 4 | FCC Request for Confidentiality Letter(SX-PCEAN2) | Cover Letter(s) Adobe Acrobat PDF (137 kB) |
2016-11-11 00:00:00 2016-11-11 00:00:00 |
| 4 | FCC Declaration of Professional Installation(SX-PCEAN2) | Cover Letter(s) Adobe Acrobat PDF (132 kB) |
2016-11-11 00:00:00 2016-11-11 00:00:00 |
| 4 | FCC Class II Permissive Change Letter(SX-PCEAN2) | Cover Letter(s) Adobe Acrobat PDF (233 kB) |
2016-11-11 00:00:00 2016-11-11 00:00:00 |
| 4 | FCC Authorization Letter(SX-PCEAN2) | Cover Letter(s) Adobe Acrobat PDF (163 kB) |
2016-11-11 00:00:00 2016-11-11 00:00:00 |
APP # 3 (2016-05-19)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 3 | FCC Test Setup Photo_NII | Test Setup Photos Adobe Acrobat PDF (351 kB) |
2016-05-19 00:00:00 2016-05-19 00:00:00 |
| 3 | FCC Test Report_NII | Test Report Adobe Acrobat PDF (1074 kB) |
2016-05-19 00:00:00 2016-05-19 00:00:00 |
| 3 | FCC Request for Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (272 kB) |
2016-05-19 00:00:00 2016-05-19 00:00:00 |
| 3 | FCC Class II Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (384 kB) |
2016-05-19 00:00:00 2016-05-19 00:00:00 |
| 3 | FCC Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (297 kB) |
2016-05-19 00:00:00 2016-05-19 00:00:00 |
APP # 2 (2015-08-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | ID Label & location | ID Label/Location Info Adobe Acrobat PDF (283 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 2 | Users manual | Users Manual Adobe Acrobat PDF (60 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 2 | Internal photos | Internal Photos Adobe Acrobat PDF (443 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 2 | Exernal photos | External Photos Adobe Acrobat PDF (443 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 2 | RF EX(DTS) | RF Exposure Info Adobe Acrobat PDF (56 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 2 | Test setup photos | Test Setup Photos Adobe Acrobat PDF (511 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 2 | Test report(DTS) | Test Report Adobe Acrobat PDF (2667 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 2 | Confidentiality letter | Cover Letter(s) Adobe Acrobat PDF (145 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 2 | Professional installation letter | Cover Letter(s) Adobe Acrobat PDF (119 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 2 | MA letter | Cover Letter(s) Adobe Acrobat PDF (307 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 2 | Declaration letter for new and old rule | Cover Letter(s) Adobe Acrobat PDF (137 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 2 | Authorization letter | Cover Letter(s) Adobe Acrobat PDF (170 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
APP # 1 (2015-08-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | ID label & location | ID Label/Location Info Adobe Acrobat PDF (283 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 1 | User manual | Users Manual Adobe Acrobat PDF (60 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 1 | Internal photos | Internal Photos Adobe Acrobat PDF (443 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 1 | External photos | External Photos Adobe Acrobat PDF (443 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 1 | RF EX(NII) | RF Exposure Info Adobe Acrobat PDF (57 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 1 | Test setup photos(NII) | Test Setup Photos Adobe Acrobat PDF (511 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 1 | Test report(NII) | Test Report Adobe Acrobat PDF (5145 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 1 | Test setup photos(DFS) | Test Setup Photos Adobe Acrobat PDF (357 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 1 | Test report(DFS) | Test Report Adobe Acrobat PDF (1117 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 1 | Confidentiality letter | Cover Letter(s) Adobe Acrobat PDF (145 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 1 | Professional installation letter | Cover Letter(s) Adobe Acrobat PDF (119 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 1 | MA letter | Cover Letter(s) Adobe Acrobat PDF (307 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 1 | Declaration letter for new and old rule | Cover Letter(s) Adobe Acrobat PDF (137 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
| 1 | Authorization letter | Cover Letter(s) Adobe Acrobat PDF (170 kB) |
2015-05-01 00:00:00 2015-08-13 00:00:00 |
APP # 8 (2017-09-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 8 | Expedited review request(include spec) | Operational Description Adobe Acrobat PDF (307 kB) |
2017-09-26 00:00:00 N/A |
APP # 1 (2015-08-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Operational description(Security) | Operational Description Adobe Acrobat PDF (1049 kB) |
2015-05-01 00:00:00 N/A |
APP # 5 (2016-11-11)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 5 | (Confidential) Theory operation_Antenna Specification_ANTDC-081A0 | Operational Description Adobe Acrobat PDF (104 kB) |
2016-11-11 00:00:00 N/A |
APP # 7 (2017-09-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 7 | 05 (Confidential) Theory of Operation-Antenna Specification | Operational Description Adobe Acrobat PDF (157 kB) |
2017-09-11 00:00:00 N/A |
APP # 1 (2015-08-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Operational description(Spec1) | Operational Description Adobe Acrobat PDF (1853 kB) |
2015-05-01 00:00:00 N/A |
APP # 2 (2015-08-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Operational description(Spec1) | Operational Description Adobe Acrobat PDF (1853 kB) |
2015-05-01 00:00:00 N/A |
APP # 13 (2023-04-19)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 13 | 04 Short-Term Confidential_External Photo | External Photos Adobe Acrobat PDF (169 kB) |
2023-04-19 00:00:00 2023-10-17 00:00:00 |
APP # 8 (2017-09-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 8 | 05 (Confidential) Theory of Operation-Antenna configuration | Operational Description Adobe Acrobat PDF (409 kB) |
2017-09-11 00:00:00 N/A |
APP # 3 (2016-05-19)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 3 | (Confidential) Theory of Operation-Software Security | Operational Description Adobe Acrobat PDF (22 kB) |
2016-05-19 00:00:00 N/A |
APP # 1 (2015-08-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Parts list | Parts List/Tune Up Info Adobe Acrobat PDF (248 kB) |
2015-05-01 00:00:00 N/A |
APP # 2 (2015-08-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Oprational description(Antenna) | Operational Description Adobe Acrobat PDF (786 kB) |
2015-05-01 00:00:00 N/A |
APP # 6 (2016-11-30)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 6 | Operational description(Security) | Operational Description Adobe Acrobat PDF (22 kB) |
2016-11-18 00:00:00 N/A |
APP # 8 (2017-09-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 8 | 05 (Confidential) Theory of Operation-Antenna Specification | Operational Description Adobe Acrobat PDF (157 kB) |
2017-09-11 00:00:00 N/A |
APP # 4 (2016-11-11)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 4 | (Confidential) Theory operation_Antenna list_FCC | Operational Description Adobe Acrobat PDF (16 kB) |
2016-11-11 00:00:00 N/A |
APP # 8 (2017-09-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 8 | Expedited request (include specification) | Operational Description Adobe Acrobat PDF (307 kB) |
2017-09-26 00:00:00 N/A |
APP # 1 (2015-08-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Operational description(Interface) | Operational Description Adobe Acrobat PDF (581 kB) |
2015-05-01 00:00:00 N/A |
APP # 5 (2016-11-11)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 5 | (Confidential) Theory operation_Antenna list_FCC | Operational Description Adobe Acrobat PDF (16 kB) |
2016-11-11 00:00:00 N/A |
APP # 7 (2017-09-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 7 | 05 (Confidential) Theory of Operation-Antenna list | Operational Description Adobe Acrobat PDF (16 kB) |
2017-09-11 00:00:00 N/A |
APP # 2 (2015-08-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Schematics | Schematics Adobe Acrobat PDF (809 kB) |
2015-05-01 00:00:00 N/A |
| 2 | Operational description(interface) | Operational Description Adobe Acrobat PDF (581 kB) |
2015-05-01 00:00:00 N/A |
APP # 13 (2023-04-19)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 13 | 03 Short-Term Confidential_FCC Test Setup Photo_DTS | Test Setup Photos Adobe Acrobat PDF (297 kB) |
2023-04-19 00:00:00 2023-10-17 00:00:00 |
APP # 8 (2017-09-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 8 | Expedited review request(include specification) | Operational Description Adobe Acrobat PDF (307 kB) |
2017-09-26 00:00:00 N/A |
APP # 1 (2015-08-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Operational description(Security_Rev01) | Operational Description Adobe Acrobat PDF (101 kB) |
2015-08-04 00:00:00 N/A |
APP # 5 (2016-11-11)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 5 | (Confidential) Theory operation_Software Security | Operational Description Adobe Acrobat PDF (22 kB) |
2016-11-11 00:00:00 N/A |
APP # 7 (2017-09-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 7 | expedited review request(Include Specification) | Operational Description Adobe Acrobat PDF (307 kB) |
2017-09-26 00:00:00 N/A |
APP # 2 (2015-08-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Block diagram | Block Diagram Adobe Acrobat PDF (252 kB) |
2015-05-01 00:00:00 N/A |
APP # 1 (2015-08-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Operational description(Spec2) | Operational Description Adobe Acrobat PDF (3224 kB) |
2015-05-01 00:00:00 N/A |
APP # 2 (2015-08-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Operational description(Spec2) | Operational Description Adobe Acrobat PDF (3224 kB) |
2015-05-01 00:00:00 N/A |
APP # 6 (2016-11-30)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 6 | Operational description(Antenna list) | Operational Description Adobe Acrobat PDF (16 kB) |
2016-11-18 00:00:00 N/A |
APP # 8 (2017-09-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 8 | 05 (Confidential) Theory of Operation-Antenna list | Operational Description Adobe Acrobat PDF (16 kB) |
2017-09-11 00:00:00 N/A |
APP # 2 (2015-08-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Parts list | Parts List/Tune Up Info Adobe Acrobat PDF (248 kB) |
2015-05-01 00:00:00 N/A |
APP # 1 (2015-08-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Operational description(Antenna) | Operational Description Adobe Acrobat PDF (786 kB) |
2015-05-01 00:00:00 N/A |
APP # 8 (2017-09-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 8 | 05 (Confidential) Theory of Operation-Software Security | Operational Description Adobe Acrobat PDF (87 kB) |
2017-09-11 00:00:00 N/A |
APP # 1 (2015-08-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Block diagram RF | Block Diagram Adobe Acrobat PDF (252 kB) |
2015-05-01 00:00:00 N/A |
APP # 7 (2017-09-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 7 | 05 (Confidential) Theory of Operation-Antenna configuration | Operational Description Adobe Acrobat PDF (409 kB) |
2017-09-11 00:00:00 N/A |
APP # 1 (2015-08-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Schematics | Schematics Adobe Acrobat PDF (809 kB) |
2015-05-01 00:00:00 N/A |
APP # 4 (2016-11-11)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 4 | (Confidential) Theory operation_Antenna Specification_ANTDC-081A0 | Operational Description Adobe Acrobat PDF (104 kB) |
2016-11-11 00:00:00 N/A |
Correspondence
All Correspondence
| App # | Document | Date |
|---|---|---|
| 1 | [Re-Sent]Sample Request Email generated [May 22 2015] | 2015-05-22 14:39:22 |
| 1 | Incoming Correspondence generated [Aug 13 2015] | 2015-08-13 16:17:45 |
APP # 1 (2015-08-13)
| App # | Document | Type |
|---|---|---|
| 1 | [Re-Sent]Sample Request Email generated [May 22 2015] | 2015-05-22 14:39:22 |
| 1 | Incoming Correspondence generated [Aug 13 2015] | 2015-08-13 16:17:45 |
Application Forms
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Applications are submitted for FCC ID and Grant requests. Click an above application to view details
Grants
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 11/11/2016 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai,Seika-cho Sourakugun |
| Kyoto, 619-0237 Japan |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 |
| Class II Permissive Change to add specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Silex Technology, Inc. 2-3-1 Hikaridai,Seika-cho Sourakugun Kyoto, 619-0237 Japan |
Date of Grant: 11/11/2016 |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 |
| Class II Permissive Change to add specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |
EA240786 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 05/19/2016 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai,Seika-cho Sourakugun |
| Kyoto, 619-0237 Japan |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| Class II Permissive Change based on FCC14-30. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Silex Technology, Inc. 2-3-1 Hikaridai,Seika-cho Sourakugun Kyoto, 619-0237 Japan |
Date of Grant: 05/19/2016 |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| Class II Permissive Change based on FCC14-30. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |
EA780994 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 09/28/2017 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai,Seika-cho Sourakugun |
| Kyoto, 619-0237 Japan |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| Class II Permissive Change to add specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Silex Technology, Inc. 2-3-1 Hikaridai,Seika-cho Sourakugun Kyoto, 619-0237 Japan |
Date of Grant: 09/28/2017 |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| Class II Permissive Change to add specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |
EA996685 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/19/2023 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 |
| Class II Permissive Change to add specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures except the conditions shown in this filing. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 04/19/2023 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 |
| Class II Permissive Change to add specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures except the conditions shown in this filing. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |
EA545761 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 05/31/2018 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai,Seika-cho Sourakugun |
| Kyoto, 619-0237 Japan |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 |
| C2PC to add 855724 Inwave WLAN-Kazaar 03019 Antenna, 5GHz bands are disabled through software. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Silex Technology, Inc. 2-3-1 Hikaridai,Seika-cho Sourakugun Kyoto, 619-0237 Japan |
Date of Grant: 05/31/2018 |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 |
| C2PC to add 855724 Inwave WLAN-Kazaar 03019 Antenna, 5GHz bands are disabled through software. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |
EA826616 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 11/11/2016 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai,Seika-cho Sourakugun |
| Kyoto, 619-0237 Japan |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| Class II Permissive Change to add client mode and specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device except antenna(ANTDC-081A0). Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Silex Technology, Inc. 2-3-1 Hikaridai,Seika-cho Sourakugun Kyoto, 619-0237 Japan |
Date of Grant: 11/11/2016 |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| Class II Permissive Change to add client mode and specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device except antenna(ANTDC-081A0). Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |
EA234494 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
| UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan | Date of Grant: 08/13/2015 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai,Seika-cho Sourakugun |
| Kyoto, 619-0237 Japan |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 39 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 39 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 39: | This sub-band complies with the new rules for U-NII devices adopted under Docket No. 13-49. This device may not be sold or marketed after June 1, 2016, unless all grant-listed U-NII sub-bands demonstrate compliance with Docket No. 13-49. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
>
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/20/2021 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| Class II Permissive Change to allow simultaneous transmission evaluation with another SX-PCEAN2 wireless module (FCC ID: N6C-SXPCEAN2). Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures except the conditions shown in this filing. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 04/20/2021 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| Class II Permissive Change to allow simultaneous transmission evaluation with another SX-PCEAN2 wireless module (FCC ID: N6C-SXPCEAN2). Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures except the conditions shown in this filing. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |
EA185371 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 01/16/2018 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai,Seika-cho Sourakugun |
| Kyoto, 619-0237 Japan |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| C2PC to add Taoglas Antenna GW.05.0153., 2.4 GHz band is disabled by software. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Silex Technology, Inc. 2-3-1 Hikaridai,Seika-cho Sourakugun Kyoto, 619-0237 Japan |
Date of Grant: 01/16/2018 |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| C2PC to add Taoglas Antenna GW.05.0153., 2.4 GHz band is disabled by software. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |
EA144364 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 11/30/2016 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai,Seika-cho Sourakugun |
| Kyoto, 619-0237 Japan |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| Class II Permissive Change to add specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Silex Technology, Inc. 2-3-1 Hikaridai,Seika-cho Sourakugun Kyoto, 619-0237 Japan |
Date of Grant: 11/30/2016 |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0485 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0426 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0458 |
| Class II Permissive Change to add specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device. Additional host systems must be required reassessment of DFS. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |
EA992019 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/20/2021 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 |
| Class II Permissive Change to allow simultaneous transmission evaluation with another SX-PCEAN2 wireless module (FCC ID: N6C-SXPCEAN2). Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures except the conditions shown in this filing. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 04/20/2021 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 |
| Class II Permissive Change to allow simultaneous transmission evaluation with another SX-PCEAN2 wireless module (FCC ID: N6C-SXPCEAN2). Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures except the conditions shown in this filing. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |
EA743768 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 09/28/2017 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai,Seika-cho Sourakugun |
| Kyoto, 619-0237 Japan |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 |
| Class II Permissive Change to add specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Silex Technology, Inc. 2-3-1 Hikaridai,Seika-cho Sourakugun Kyoto, 619-0237 Japan |
Date of Grant: 09/28/2017 |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 |
| Class II Permissive Change to add specific antennas described in the filing. Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |
EA292839 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
| UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan | Date of Grant: 08/13/2015 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai,Seika-cho Sourakugun |
| Kyoto, 619-0237 Japan |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SXPCEAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PCI Express Half mini card WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.5837 | ||
| 39 CC MO | 15C | 5745.0 - 5825.0 | 0.3729 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. For professional installation only. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) and cable(s) with equal gain must be used with this transmitter. |
| 39: | This sub-band complies with the new rules for U-NII devices adopted under Docket No. 13-49. This device may not be sold or marketed after June 1, 2016, unless all grant-listed U-NII sub-bands demonstrate compliance with Docket No. 13-49. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
>