FCC ID N7N-EM3420P

800/1900 MHZ Dual Band CDMA Data Modem Module

by Sierra Wireless Inc.

Grantee Code: N7N   Product Code: EM3420P
Latest application date: 2006-10-17

FCC ID Device Details

FCC IDN7N-EM3420P
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeN7N
Product CodeEM3420P
Applicant BusinessSierra Wireless Inc. 🇨🇦
Related Domains sierrawireless.com
Equipment Class800/1900 MHZ Dual Band CDMA Data Modem Module
Test FirmCompliance Certification Services

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.7-848.31 MHzClass II permissive change or modification of presently authorized equipment2006-10-17
824.7-848.31 MHzOriginal Equipment2003-09-11

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2003-09-11PDF 146.8 KB
Internal PhotosInternal Photos2006-12-01PDF 228.1 KB
Internal PhotosInternal Photos2003-09-11PDF 957.4 KB
External PhotosExternal Photos2003-09-11PDF 407.2 KB
FCC ID label format and locationID Label/Location Info2003-09-11PDF 77.1 KB
Test Setup photosTest Setup Photos2006-12-01PDF 238.8 KB
Test Setup PhotosTest Setup Photos2003-09-11PDF 1.1 MB
Test ReportTest Report2006-10-17PDF 644.4 KB
Test ReportTest Report2003-09-11PDF 3.9 MB
Agent Authorization LetterCover Letter(s)2006-10-17PDF 92.6 KB
Class II permissive change letterCover Letter(s)2006-10-17PDF 21.9 KB
Request for confidentiality letterCover Letter(s)2006-10-17PDF 31.7 KB
Request for confidentiality letterCover Letter(s)2003-09-11PDF 21.4 KB
Revised GrantCover Letter(s)2003-09-11PDF 86.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 41.6 KB
Update Block Diagram Metadata onlyBlock DiagramPDF 33.9 KB
Update Block Diagram diagram Metadata onlyBlock DiagramPDF 178.5 KB
Schematic Diagram Metadata onlySchematicsPDF 474 KB
Opeational Description Metadata onlyOperational DescriptionPDF 221.4 KB
Product specification sheet Metadata onlyOperational DescriptionPDF 572.5 KB
Antenna specification sheet Metadata onlyParts List/Tune Up InfoPDF 25.6 KB
Parts list Metadata onlyParts List/Tune Up InfoPDF 25.9 KB
Tune up procedures Metadata onlyParts List/Tune Up InfoPDF 45.2 KB

Application Information

Application IDqH3t//wQ3xfFqTA+ku0r2g==
Final Action Date2006-10-17
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0005810874
ModelEM3420P
Frequency Range824.7-848.31 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device Description800/1900 MHZ Dual Band CDMA Data Modem Module
Responsible PartyYing Wang, Director, Regulatory Compliance, ywang@SierraWireless.com , 604-232-1440
AgentMichael Michael Michael, Compliance Certification Services, michael.heckrotte@ccsemc.com , 408-463-0885
Test FirmBarbara Judge, Compliance Certification Services, bjudge@ccsemc.com , 510-771-1104
TCB Emailmike.kuo@ccsemc.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Short-Term Confidentiality Date12/01/2006
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change. Output power listed is ERP for Part 22 with 1.5dBi antenna gain and EIRP for Part 24 with 0.5dBi antenna gain. The Average Conducted Power Output is 0.26 watts for 800MHz band and 0.25 watts for 1900MHz band. The antenna(s) used for this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter within a host device. End-users must be provided with specific information required to satisfy RF exposure compliance for final host devices. Modular transmitter. The maximum antenna gain must not exceed 6 dBi for Part 22 and Part 24 including cable loss. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
qH3t//wQ3xfFqTA+ku0r2g==2006-10-17Class II permissive change or modification of presently authorized equipment
GHDW8peY3ypcAL5UjxBfrw==2003-09-11Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.7-848.31 MHz0.6462.5ppm1M25F9W22H
1851.25-1908.75 MHz0.6312.5ppm1M25F9W24E

Grants

TCB Grant - Application qH3t//wQ3xfFqTA+ku0r2g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 10/17/2006

Application Dated: 10/17/2006
Sierra Wireless Inc.
13811 Wireless Way
Richmond, BC, V6V 3A4
Canada
 
Attention: Ying Wang , Director, Regulatory Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N7N-EM3420P
Name of Grantee:  Sierra Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: 800/1900 MHZ Dual Band CDMA Data Modem Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.646 2.5  PM 1M25F9W
24E 1851.25  -  1908.75 0.631 2.5  PM 1M25F9W

Class II Permissive Change. Output power listed is ERP for Part 22 with 1.5dBi antenna gain and EIRP for Part 24 with 0.5dBi antenna gain. The Average Conducted Power Output is 0.26 watts for 800MHz band and 0.25 watts for 1900MHz band. The antenna(s) used for this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter within a host device. End-users must be provided with specific information required to satisfy RF exposure compliance for final host devices. Modular transmitter. The maximum antenna gain must not exceed 6 dBi for Part 22 and Part 24 including cable loss. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application qH3t//wQ3xfFqTA+ku0r2g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sierra Wireless Inc.
13811 Wireless Way
Richmond, BC, V6V 3A4
Canada
  Date of Grant: 10/17/2006

Application Dated: 10/17/2006
 
Attention: Ying Wang , Director, Regulatory Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N7N-EM3420P
Name of Grantee:  Sierra Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: 800/1900 MHZ Dual Band CDMA Data Modem Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.646 2.5  PM 1M25F9W
24E 1851.25  -  1908.75 0.631 2.5  PM 1M25F9W

Class II Permissive Change. Output power listed is ERP for Part 22 with 1.5dBi antenna gain and EIRP for Part 24 with 0.5dBi antenna gain. The Average Conducted Power Output is 0.26 watts for 800MHz band and 0.25 watts for 1900MHz band. The antenna(s) used for this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter within a host device. End-users must be provided with specific information required to satisfy RF exposure compliance for final host devices. Modular transmitter. The maximum antenna gain must not exceed 6 dBi for Part 22 and Part 24 including cable loss. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application GHDW8peY3ypcAL5UjxBfrw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 09/11/2003

Application Dated: 09/11/2003
Sierra Wireless Inc.
13811 Wireless Way
Richmond, BC, V6V 3A4
Canada
 
Attention: Ying Wang , Director, Regulatory Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N7N-EM3420P
Name of Grantee:  Sierra Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: 800/1900 MHZ Dual Band CDMA Data Modem Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.646 2.5  PM 1M25F9W
24E 1851.25  -  1908.75 0.631 2.5  PM 1M25F9W

Output power listed is ERP for Part 22 with 1.5dBi antenna gain and EIRP for Part 24 with 0.5dBi antenna gain. The conducted power output is 0.26 watts for 800MHz band and 0.25 watts for 1900MHz band. The antenna(s) used for this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter within a host device. End-users must be provided with specific information required to satisfy RF exposure compliance for final host devices. Modular transmitter. The maximum antenna gain must not exceed 6 dBi for Part 22 and Part 24 including cable loss. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application GHDW8peY3ypcAL5UjxBfrw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sierra Wireless Inc.
13811 Wireless Way
Richmond, BC, V6V 3A4
Canada
  Date of Grant: 09/11/2003

Application Dated: 09/11/2003
 
Attention: Ying Wang , Director, Regulatory Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N7N-EM3420P
Name of Grantee:  Sierra Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: 800/1900 MHZ Dual Band CDMA Data Modem Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.646 2.5  PM 1M25F9W
24E 1851.25  -  1908.75 0.631 2.5  PM 1M25F9W

Output power listed is ERP for Part 22 with 1.5dBi antenna gain and EIRP for Part 24 with 0.5dBi antenna gain. The conducted power output is 0.26 watts for 800MHz band and 0.25 watts for 1900MHz band. The antenna(s) used for this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter within a host device. End-users must be provided with specific information required to satisfy RF exposure compliance for final host devices. Modular transmitter. The maximum antenna gain must not exceed 6 dBi for Part 22 and Part 24 including cable loss. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: