FCC ID N7NHL7588

Wireless module

by Sierra Wireless Inc.

Grantee Code: N7N   Product Code: HL7588
Latest application date: 2019-02-13

Device Images

FCC ID Device Details

FCC IDN7NHL7588
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeN7N
Product CodeHL7588
Applicant BusinessSierra Wireless Inc. 🇨🇦
Related Domains sierrawireless.com
Equipment ClassWireless module
Test FirmSGS Taiwan Ltd. Electronics & Communication Lab

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
706.5-713.5 MHzClass II permissive change or modification of presently authorized equipment2019-02-13
706.5-713.5 MHzClass II permissive change or modification of presently authorized equipment2017-11-09
706.5-713.5 MHzClass II permissive change or modification of presently authorized equipment2016-07-08
706.5-713.5 MHzOriginal Equipment2015-08-24

Exhibits

DocumentTypeAvailableFile
Instruction ManualUsers Manual2019-08-12PDF 465.8 KB
HL7588 Accessory Board - Hardware Integration Guide - Rev1.1Users Manual2016-08-22PDF 626.7 KB
Users ManualUsers Manual2016-02-21PDF 480.8 KB
Internal PhotosInternal Photos2019-08-12PDF 452.3 KB
HL7588 PhotosInternal Photos2016-08-22PDF 156.3 KB
Internal PhotosInternal Photos2016-02-21PDF 113.8 KB
External PhotosExternal Photos2019-08-12PDF 344.7 KB
HL7588 PhotosExternal Photos2016-08-22PDF 156.3 KB
External PhotosExternal Photos2016-02-21PDF 177.8 KB
Label & Location HostID Label/Location Info2019-02-13PDF 80 KB
HL7588 label and locationID Label/Location Info2016-07-08PDF 116.5 KB
ID Label/Location InfoID Label/Location Info2015-08-24PDF 138.7 KB
Test Setup Photos SARTest Setup Photos2019-08-12PDF 459.6 KB
Test photoTest Setup Photos2016-08-22PDF 574.6 KB
Test Setup PhotosTest Setup Photos2016-02-21PDF 337.4 KB
1652086R-RF-FCC Part 22H&24E&27H&L&M-LTE-Wireless Module-HL7588-V1.2Test Report2016-07-08PDF 1.5 MB
Test Report for Part 22-1Test Report2015-08-24PDF 3.6 MB
Test Report for Part 22-2Test Report2015-08-24PDF 2.9 MB
Test Report for Part 22-3Test Report2015-08-24PDF 2.9 MB
Test Report for Part 24-1Test Report2015-08-24PDF 5 MB
Test Report for Part 24-2Test Report2015-08-24PDF 5.4 MB
Test Report for Part 24-3Test Report2015-08-24PDF 3.2 MB
Test Report for Part 27-1Test Report2015-08-24PDF 4.2 MB
Test Report for Part 27-2Test Report2015-08-24PDF 5.1 MB
Test Report for Part 27L-1Test Report2015-08-24PDF 5.4 MB
Test Report for Part 27L-2Test Report2015-08-24PDF 4.4 MB
Test Report for Part 27L-3Test Report2015-08-24PDF 3 MB
Agent Authorization LetterCover Letter(s)2019-02-13PDF 34.2 KB
Authorization Letter Denis ChabotCover Letter(s)2019-02-13PDF 60.3 KB
Class II Permissive ChangeCover Letter(s)2019-02-13PDF 68.8 KB
Confidentiality Request LetterCover Letter(s)2019-02-13PDF 93.8 KB
COVER LETTERCover Letter(s)2017-11-09PDF 377.5 KB
FCC C2PC letterCover Letter(s)2016-07-08PDF 110.8 KB
FCC Confidential letterCover Letter(s)2016-07-08PDF 211.9 KB
HL7588 FCC Modular LetterCover Letter(s)2016-07-08PDF 82.9 KB
ConfidentialityCover Letter(s)2015-08-24PDF 324.6 KB
Modular ApprovalCover Letter(s)2015-08-24PDF 89.9 KB
POACover Letter(s)2015-08-24PDF 204.4 KB
SAR ReportRF Exposure Info2019-02-13PDF 2.4 MB
HL7588 Module FCC_IC MPE Evaluation 20171013RF Exposure Info2017-11-09PDF 764.9 KB
HL7588 Module FCC MPE EvaluationRF Exposure Info2016-07-08PDF 605.9 KB
RF Expsoure InfoRF Exposure Info2015-08-24PDF 273.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 170.8 KB
HL7588 Block Diagram Metadata onlyBlock DiagramPDF 170.2 KB
MC-HL7588 block diagram Metadata onlyBlock DiagramPDF 44 KB
HL7588 - Schematics Metadata onlySchematicsPDF 387 KB
SCH_MC_board Metadata onlySchematicsPDF 133.7 KB
Schematics Metadata onlySchematicsPDF 271.8 KB
HL7588_Operation_Description_v3 Metadata onlyOperational DescriptionPDF 189.7 KB
Operational Description Metadata onlyOperational DescriptionPDF 182.6 KB
Operational Description Antenna Report Metadata onlyOperational DescriptionPDF 447.5 KB
HL7588_Tune_Up_Procedure_v3 Metadata onlyParts List/Tune Up InfoPDF 163.8 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 18.5 KB
Tune Up Info Metadata onlyParts List/Tune Up InfoPDF 156.7 KB

Application Information

Application IDy6+j1rA/n42f0cP5/uGEMA==
Final Action Date2019-02-13
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0005810874
ModelHL7588
Frequency Range706.5-713.5 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionWireless module
Responsible PartyYing Wang, Director, Regulatory Compliance, ywang@SierraWireless.com , 604-232-1440
Test FirmRyan WANG, SGS Taiwan Ltd. Electronics & Communication Lab, ryan-ec.wang@sgs.com , +886-2-2299-3279
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date08/12/2019
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change: Adds operation in a new host device, Mobile Create mobile RF modem, Model Number MCM3. Limited Singular Modular Approval. Power out is conducted at the antenna terminal. SAR compliance is for operating configurations near the body which maintain a minimum separation distance of 1.0 cm, as described in this filing. End-users must be informed of the installation and operating requirements for satisfying RF exposure compliance. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing The highest reported SAR is 1.33 W/kg. This device supports LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for FDD LTE Band 5; and LTE of 5, and 10 MHz bandwidth modes for FDD LTE Bands 13 and 17. Territories; this filing is applicable only for U.S. operations.

Applications

Application IDDatePurpose
y6+j1rA/n42f0cP5/uGEMA==2019-02-13Class II permissive change or modification of presently authorized equipment
YlFVk+umY8ySnKW68K9gGA==2017-11-09Class II permissive change or modification of presently authorized equipment
Hkc3nKTADRd3V/T5SQnsiA==2016-07-08Class II permissive change or modification of presently authorized equipment
W5dx7cGqF59ejDUUMSC6JQ==2015-08-24Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
706.5-713.5 MHz0.2240.027ppm4M50G7D27BC
706.5-713.5 MHz0.2242.7ppm4M50G7D27BC
706.5-713.5 MHz0.2070.027ppm4M50W7D27BC
706.5-713.5 MHz0.2072.7ppm4M50W7D27BC
709-711 MHz0.2230.027ppm8M97G7D27BC
709-711 MHz0.2232.7ppm8M97G7D27BC
709-711 MHz0.2080.027ppm8M94W7D27BC
709-711 MHz0.2082.7ppm8M94W7D27BC
779.5-784.5 MHz0.220.027ppm4M51G7D27BC
779.5-784.5 MHz0.222.7ppm4M51G7D27BC
779.5-784.5 MHz0.2030.027ppm4M50W7D27BC
779.5-784.5 MHz0.2032.7ppm4M50W7D27BC
782 MHz0.2280.027ppm9M01G7D27BC
782 MHz0.2282.7ppm9M01G7D27BC
782 MHz0.2070.027ppm8M97W7D27BC
782 MHz0.2072.7ppm8M97W7D27BC
824.7-848.3 MHz0.2050.025ppm1M09W7D22HBC
824.7-848.3 MHz0.2052.5ppm1M09W7D22HBC
829-844 MHz0.2350.025ppm9M01G7D22HBC
829-844 MHz0.2352.5ppm9M01G7D22HBC
829-844 MHz0.2060.025ppm9M01W7D22HBC
829-844 MHz0.2062.5ppm9M01W7D22HBC
1710.7-1754.3 MHz0.2560.015ppm1M09G7D27BC
1710.7-1754.3 MHz0.2561.5ppm1M09G7D27BC
1710.7-1754.3 MHz0.2160.015ppm1M09W7D27BC
1710.7-1754.3 MHz0.2161.5ppm1M09W7D27BC
1720-1745 MHz0.2590.015ppm18M0G7D27BC
1720-1745 MHz0.2591.5ppm18M0G7D27BC
1720-1745 MHz0.2090.015ppm18M0W7D27BC
1720-1745 MHz0.2091.5ppm18M0W7D27BC
1850.7-1909.3 MHz0.2360.015ppm1M09G7D24EBC
1850.7-1909.3 MHz0.2361.5ppm1M09G7D24EBC
1850.7-1909.3 MHz0.2050.015ppm1M09W7D24EBC
1850.7-1909.3 MHz0.2051.5ppm1M09W7D24EBC
1852.4-1907.6 MHz0.3550.015ppm4M14F9W24EBC
1852.4-1907.6 MHz0.3551.5ppm4M14F9W24EBC
1860-1900 MHz0.2280.015ppm18M0W7D24EBC
1860-1900 MHz0.2281.5ppm18M0W7D24EBC
1860-1900 MHz0.2470.015ppm18M0G7D24EBC
1860-1900 MHz0.2471.5ppm18M0G7D24EBC

Grants

TCB Grant - Application YlFVk+umY8ySnKW68K9gGA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/09/2017

Application Dated: 11/07/2017
Sierra Wireless Inc.
13811 Wireless Way
Richmond, BC, V6V 3A4
Canada
 
Attention: Ying Wang , Director, Regulatory Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N7NHL7588
Name of Grantee:  Sierra Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Wireless module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 826.4  -  846.6 0.298 0.025  PM 4M11F9W
BC 22H 824.7  -  848.3 0.226 0.025  PM 1M09G7D
BC 22H 824.7  -  848.3 0.205 0.025  PM 1M09W7D
BC 22H 829.0  -  844.0 0.235 0.025  PM 9M01G7D
BC 22H 829.0  -  844.0 0.206 0.025  PM 9M01W7D
BC 24E 1852.4  -  1907.6 0.355 0.015  PM 4M14F9W
BC 24E 1850.7  -  1909.3 0.236 0.015  PM 1M09G7D
BC 24E 1850.7  -  1909.3 0.205 0.015  PM 1M09W7D
BC 24E 1860.0  -  1900.0 0.247 0.015  PM 18M0G7D
BC 24E 1860.0  -  1900.0 0.228 0.015  PM 18M0W7D
BC 27 779.5  -  784.5 0.22 0.027  PM 4M51G7D
BC 27 779.5  -  784.5 0.203 0.027  PM 4M50W7D
BC 27 782.0  -  782.0 0.228 0.027  PM 9M01G7D
BC 27 782.0  -  782.0 0.207 0.027  PM 8M97W7D
BC 27 706.5  -  713.5 0.224 0.027  PM 4M50G7D
BC 27 706.5  -  713.5 0.207 0.027  PM 4M50W7D
BC 27 709.0  -  711.0 0.223 0.027  PM 8M97G7D
BC 27 709.0  -  711.0 0.208 0.027  PM 8M94W7D
BC 27 1710.7  -  1754.3 0.256 0.015  PM 1M09G7D
BC 27 1710.7  -  1754.3 0.216 0.015  PM 1M09W7D
BC 27 1720.0  -  1745.0 0.259 0.015  PM 18M0G7D
BC 27 1720.0  -  1745.0 0.209 0.015  PM 18M0W7D

Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 9.72 dBi at 800 MHz and/or 850 MHz, 7.51 dBi at 1900 MHz, 9.74 dBi at 700 MHz and 5.78 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24 and 27. The Grantee is responsible for providing the documentation required for modular use.

C2PC to address the RF Exposure collocation as documented in this filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application YlFVk+umY8ySnKW68K9gGA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sierra Wireless Inc.
13811 Wireless Way
Richmond, BC, V6V 3A4
Canada
  Date of Grant: 11/09/2017

Application Dated: 11/07/2017
 
Attention: Ying Wang , Director, Regulatory Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N7NHL7588
Name of Grantee:  Sierra Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Wireless module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 826.4  -  846.6 0.298 0.025  PM 4M11F9W
BC 22H 824.7  -  848.3 0.226 0.025  PM 1M09G7D
BC 22H 824.7  -  848.3 0.205 0.025  PM 1M09W7D
BC 22H 829.0  -  844.0 0.235 0.025  PM 9M01G7D
BC 22H 829.0  -  844.0 0.206 0.025  PM 9M01W7D
BC 24E 1852.4  -  1907.6 0.355 0.015  PM 4M14F9W
BC 24E 1850.7  -  1909.3 0.236 0.015  PM 1M09G7D
BC 24E 1850.7  -  1909.3 0.205 0.015  PM 1M09W7D
BC 24E 1860.0  -  1900.0 0.247 0.015  PM 18M0G7D
BC 24E 1860.0  -  1900.0 0.228 0.015  PM 18M0W7D
BC 27 779.5  -  784.5 0.22 0.027  PM 4M51G7D
BC 27 779.5  -  784.5 0.203 0.027  PM 4M50W7D
BC 27 782.0  -  782.0 0.228 0.027  PM 9M01G7D
BC 27 782.0  -  782.0 0.207 0.027  PM 8M97W7D
BC 27 706.5  -  713.5 0.224 0.027  PM 4M50G7D
BC 27 706.5  -  713.5 0.207 0.027  PM 4M50W7D
BC 27 709.0  -  711.0 0.223 0.027  PM 8M97G7D
BC 27 709.0  -  711.0 0.208 0.027  PM 8M94W7D
BC 27 1710.7  -  1754.3 0.256 0.015  PM 1M09G7D
BC 27 1710.7  -  1754.3 0.216 0.015  PM 1M09W7D
BC 27 1720.0  -  1745.0 0.259 0.015  PM 18M0G7D
BC 27 1720.0  -  1745.0 0.209 0.015  PM 18M0W7D

Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 9.72 dBi at 800 MHz and/or 850 MHz, 7.51 dBi at 1900 MHz, 9.74 dBi at 700 MHz and 5.78 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24 and 27. The Grantee is responsible for providing the documentation required for modular use.

C2PC to address the RF Exposure collocation as documented in this filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application y6+j1rA/n42f0cP5/uGEMA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 02/13/2019

Application Dated: 02/01/2019
Sierra Wireless Inc.
13811 Wireless Way
Richmond, BC, V6V 3A4
Canada
 
Attention: Ying Wang , Director, Regulatory Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N7NHL7588
Name of Grantee:  Sierra Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Wireless module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 826.4  -  846.6 0.298 2.5  PM 4M11F9W
BC 22H 824.7  -  848.3 0.226 2.5  PM 1M09G7D
BC 22H 824.7  -  848.3 0.205 2.5  PM 1M09W7D
BC 22H 829.0  -  844.0 0.235 2.5  PM 9M01G7D
BC 22H 829.0  -  844.0 0.206 2.5  PM 9M01W7D
BC 24E 1852.4  -  1907.6 0.355 1.5  PM 4M14F9W
BC 24E 1850.7  -  1909.3 0.236 1.5  PM 1M09G7D
BC 24E 1850.7  -  1909.3 0.205 1.5  PM 1M09W7D
BC 24E 1860.0  -  1900.0 0.247 1.5  PM 18M0G7D
BC 24E 1860.0  -  1900.0 0.228 1.5  PM 18M0W7D
BC 27 779.5  -  784.5 0.22 2.7  PM 4M51G7D
BC 27 779.5  -  784.5 0.203 2.7  PM 4M50W7D
BC 27 782.0  -  782.0 0.228 2.7  PM 9M01G7D
BC 27 782.0  -  782.0 0.207 2.7  PM 8M97W7D
BC 27 706.5  -  713.5 0.224 2.7  PM 4M50G7D
BC 27 706.5  -  713.5 0.207 2.7  PM 4M50W7D
BC 27 709.0  -  711.0 0.223 2.7  PM 8M97G7D
BC 27 709.0  -  711.0 0.208 2.7  PM 8M94W7D
BC 27 1710.7  -  1754.3 0.256 1.5  PM 1M09G7D
BC 27 1710.7  -  1754.3 0.216 1.5  PM 1M09W7D
BC 27 1720.0  -  1745.0 0.259 1.5  PM 18M0G7D
BC 27 1720.0  -  1745.0 0.209 1.5  PM 18M0W7D

Class II Permissive Change: Adds operation in a new host device, Mobile Create mobile RF modem, Model Number MCM3. Limited Singular Modular Approval. Power out is conducted at the antenna terminal. SAR compliance is for operating configurations near the body which maintain a minimum separation distance of 1.0 cm, as described in this filing. End-users must be informed of the installation and operating requirements for satisfying RF exposure compliance. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing The highest reported SAR is 1.33 W/kg. This device supports LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for FDD LTE Band 5; and LTE of 5, and 10 MHz bandwidth modes for FDD LTE Bands 13 and 17. Territories; this filing is applicable only for U.S. operations.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application y6+j1rA/n42f0cP5/uGEMA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sierra Wireless Inc.
13811 Wireless Way
Richmond, BC, V6V 3A4
Canada
  Date of Grant: 02/13/2019

Application Dated: 02/01/2019
 
Attention: Ying Wang , Director, Regulatory Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N7NHL7588
Name of Grantee:  Sierra Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Wireless module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 826.4  -  846.6 0.298 2.5  PM 4M11F9W
BC 22H 824.7  -  848.3 0.226 2.5  PM 1M09G7D
BC 22H 824.7  -  848.3 0.205 2.5  PM 1M09W7D
BC 22H 829.0  -  844.0 0.235 2.5  PM 9M01G7D
BC 22H 829.0  -  844.0 0.206 2.5  PM 9M01W7D
BC 24E 1852.4  -  1907.6 0.355 1.5  PM 4M14F9W
BC 24E 1850.7  -  1909.3 0.236 1.5  PM 1M09G7D
BC 24E 1850.7  -  1909.3 0.205 1.5  PM 1M09W7D
BC 24E 1860.0  -  1900.0 0.247 1.5  PM 18M0G7D
BC 24E 1860.0  -  1900.0 0.228 1.5  PM 18M0W7D
BC 27 779.5  -  784.5 0.22 2.7  PM 4M51G7D
BC 27 779.5  -  784.5 0.203 2.7  PM 4M50W7D
BC 27 782.0  -  782.0 0.228 2.7  PM 9M01G7D
BC 27 782.0  -  782.0 0.207 2.7  PM 8M97W7D
BC 27 706.5  -  713.5 0.224 2.7  PM 4M50G7D
BC 27 706.5  -  713.5 0.207 2.7  PM 4M50W7D
BC 27 709.0  -  711.0 0.223 2.7  PM 8M97G7D
BC 27 709.0  -  711.0 0.208 2.7  PM 8M94W7D
BC 27 1710.7  -  1754.3 0.256 1.5  PM 1M09G7D
BC 27 1710.7  -  1754.3 0.216 1.5  PM 1M09W7D
BC 27 1720.0  -  1745.0 0.259 1.5  PM 18M0G7D
BC 27 1720.0  -  1745.0 0.209 1.5  PM 18M0W7D

Class II Permissive Change: Adds operation in a new host device, Mobile Create mobile RF modem, Model Number MCM3. Limited Singular Modular Approval. Power out is conducted at the antenna terminal. SAR compliance is for operating configurations near the body which maintain a minimum separation distance of 1.0 cm, as described in this filing. End-users must be informed of the installation and operating requirements for satisfying RF exposure compliance. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing The highest reported SAR is 1.33 W/kg. This device supports LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for FDD LTE Band 5; and LTE of 5, and 10 MHz bandwidth modes for FDD LTE Bands 13 and 17. Territories; this filing is applicable only for U.S. operations.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application W5dx7cGqF59ejDUUMSC6JQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 08/24/2015

Application Dated: 08/24/2015
Sierra Wireless Inc.
13811 Wireless Way
Richmond, BC, V6V 3A4
Canada
 
Attention: Ying Wang , Director, Regulatory Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N7NHL7588
Name of Grantee:  Sierra Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Wireless module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 826.4  -  846.6 0.298 0.025  PM 4M11F9W
BC 22H 824.7  -  848.3 0.226 0.025  PM 1M09G7D
BC 22H 824.7  -  848.3 0.205 0.025  PM 1M09W7D
BC 22H 829.0  -  844.0 0.235 0.025  PM 9M01G7D
BC 22H 829.0  -  844.0 0.206 0.025  PM 9M01W7D
BC 24E 1852.4  -  1907.6 0.355 0.015  PM 4M14F9W
BC 24E 1850.7  -  1909.3 0.236 0.015  PM 1M09G7D
BC 24E 1850.7  -  1909.3 0.205 0.015  PM 1M09W7D
BC 24E 1860.0  -  1900.0 0.247 0.015  PM 18M0G7D
BC 24E 1860.0  -  1900.0 0.228 0.015  PM 18M0W7D
BC 27 779.5  -  784.5 0.22 0.027  PM 4M51G7D
BC 27 779.5  -  784.5 0.203 0.027  PM 4M50W7D
BC 27 782.0  -  782.0 0.228 0.027  PM 9M01G7D
BC 27 782.0  -  782.0 0.207 0.027  PM 8M97W7D
BC 27 706.5  -  713.5 0.224 0.027  PM 4M50G7D
BC 27 706.5  -  713.5 0.207 0.027  PM 4M50W7D
BC 27 709.0  -  711.0 0.223 0.027  PM 8M97G7D
BC 27 709.0  -  711.0 0.208 0.027  PM 8M94W7D
BC 27 1710.7  -  1754.3 0.256 0.015  PM 1M09G7D
BC 27 1710.7  -  1754.3 0.216 0.015  PM 1M09W7D
BC 27 1720.0  -  1745.0 0.259 0.015  PM 18M0G7D
BC 27 1720.0  -  1745.0 0.209 0.015  PM 18M0W7D

Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 9.72 dBi at 800 MHz and/or 850 MHz, 7.51 dBi at 1900 MHz, 9.74 dBi at 700 MHz and 5.78 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24 and 27. The Grantee is responsible for providing the documentation required for modular use.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application W5dx7cGqF59ejDUUMSC6JQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sierra Wireless Inc.
13811 Wireless Way
Richmond, BC, V6V 3A4
Canada
  Date of Grant: 08/24/2015

Application Dated: 08/24/2015
 
Attention: Ying Wang , Director, Regulatory Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N7NHL7588
Name of Grantee:  Sierra Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Wireless module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 826.4  -  846.6 0.298 0.025  PM 4M11F9W
BC 22H 824.7  -  848.3 0.226 0.025  PM 1M09G7D
BC 22H 824.7  -  848.3 0.205 0.025  PM 1M09W7D
BC 22H 829.0  -  844.0 0.235 0.025  PM 9M01G7D
BC 22H 829.0  -  844.0 0.206 0.025  PM 9M01W7D
BC 24E 1852.4  -  1907.6 0.355 0.015  PM 4M14F9W
BC 24E 1850.7  -  1909.3 0.236 0.015  PM 1M09G7D
BC 24E 1850.7  -  1909.3 0.205 0.015  PM 1M09W7D
BC 24E 1860.0  -  1900.0 0.247 0.015  PM 18M0G7D
BC 24E 1860.0  -  1900.0 0.228 0.015  PM 18M0W7D
BC 27 779.5  -  784.5 0.22 0.027  PM 4M51G7D
BC 27 779.5  -  784.5 0.203 0.027  PM 4M50W7D
BC 27 782.0  -  782.0 0.228 0.027  PM 9M01G7D
BC 27 782.0  -  782.0 0.207 0.027  PM 8M97W7D
BC 27 706.5  -  713.5 0.224 0.027  PM 4M50G7D
BC 27 706.5  -  713.5 0.207 0.027  PM 4M50W7D
BC 27 709.0  -  711.0 0.223 0.027  PM 8M97G7D
BC 27 709.0  -  711.0 0.208 0.027  PM 8M94W7D
BC 27 1710.7  -  1754.3 0.256 0.015  PM 1M09G7D
BC 27 1710.7  -  1754.3 0.216 0.015  PM 1M09W7D
BC 27 1720.0  -  1745.0 0.259 0.015  PM 18M0G7D
BC 27 1720.0  -  1745.0 0.209 0.015  PM 18M0W7D

Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 9.72 dBi at 800 MHz and/or 850 MHz, 7.51 dBi at 1900 MHz, 9.74 dBi at 700 MHz and 5.78 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24 and 27. The Grantee is responsible for providing the documentation required for modular use.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application Hkc3nKTADRd3V/T5SQnsiA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 07/08/2016

Application Dated: 07/08/2016
Sierra Wireless Inc.
13811 Wireless Way
Richmond, BC, V6V 3A4
Canada
 
Attention: Ying Wang , Director, Regulatory Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N7NHL7588
Name of Grantee:  Sierra Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 826.4  -  846.6 0.298 0.025  PM 4M11F9W
BC 22H 824.7  -  848.3 0.226 0.025  PM 1M09G7D
BC 22H 824.7  -  848.3 0.205 0.025  PM 1M09W7D
BC 22H 829.0  -  844.0 0.235 0.025  PM 9M01G7D
BC 22H 829.0  -  844.0 0.206 0.025  PM 9M01W7D
BC 24E 1852.4  -  1907.6 0.355 0.015  PM 4M14F9W
BC 24E 1850.7  -  1909.3 0.236 0.015  PM 1M09G7D
BC 24E 1850.7  -  1909.3 0.205 0.015  PM 1M09W7D
BC 24E 1860.0  -  1900.0 0.247 0.015  PM 18M0G7D
BC 24E 1860.0  -  1900.0 0.228 0.015  PM 18M0W7D
BC 27 779.5  -  784.5 0.22 0.027  PM 4M51G7D
BC 27 779.5  -  784.5 0.203 0.027  PM 4M50W7D
BC 27 782.0  -  782.0 0.228 0.027  PM 9M01G7D
BC 27 782.0  -  782.0 0.207 0.027  PM 8M97W7D
BC 27 706.5  -  713.5 0.224 0.027  PM 4M50G7D
BC 27 706.5  -  713.5 0.207 0.027  PM 4M50W7D
BC 27 709.0  -  711.0 0.223 0.027  PM 8M97G7D
BC 27 709.0  -  711.0 0.208 0.027  PM 8M94W7D
BC 27 1710.7  -  1754.3 0.256 0.015  PM 1M09G7D
BC 27 1710.7  -  1754.3 0.216 0.015  PM 1M09W7D
BC 27 1720.0  -  1745.0 0.259 0.015  PM 18M0G7D
BC 27 1720.0  -  1745.0 0.209 0.015  PM 18M0W7D

Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 9.72 dBi at 800 MHz and/or 850 MHz, 7.51 dBi at 1900 MHz, 9.74 dBi at 700 MHz and 5.78 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24 and 27. The Grantee is responsible for providing the documentation required for modular use.

C2PC to mount this module on the carrier board, as documented in this filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application Hkc3nKTADRd3V/T5SQnsiA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sierra Wireless Inc.
13811 Wireless Way
Richmond, BC, V6V 3A4
Canada
  Date of Grant: 07/08/2016

Application Dated: 07/08/2016
 
Attention: Ying Wang , Director, Regulatory Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N7NHL7588
Name of Grantee:  Sierra Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 826.4  -  846.6 0.298 0.025  PM 4M11F9W
BC 22H 824.7  -  848.3 0.226 0.025  PM 1M09G7D
BC 22H 824.7  -  848.3 0.205 0.025  PM 1M09W7D
BC 22H 829.0  -  844.0 0.235 0.025  PM 9M01G7D
BC 22H 829.0  -  844.0 0.206 0.025  PM 9M01W7D
BC 24E 1852.4  -  1907.6 0.355 0.015  PM 4M14F9W
BC 24E 1850.7  -  1909.3 0.236 0.015  PM 1M09G7D
BC 24E 1850.7  -  1909.3 0.205 0.015  PM 1M09W7D
BC 24E 1860.0  -  1900.0 0.247 0.015  PM 18M0G7D
BC 24E 1860.0  -  1900.0 0.228 0.015  PM 18M0W7D
BC 27 779.5  -  784.5 0.22 0.027  PM 4M51G7D
BC 27 779.5  -  784.5 0.203 0.027  PM 4M50W7D
BC 27 782.0  -  782.0 0.228 0.027  PM 9M01G7D
BC 27 782.0  -  782.0 0.207 0.027  PM 8M97W7D
BC 27 706.5  -  713.5 0.224 0.027  PM 4M50G7D
BC 27 706.5  -  713.5 0.207 0.027  PM 4M50W7D
BC 27 709.0  -  711.0 0.223 0.027  PM 8M97G7D
BC 27 709.0  -  711.0 0.208 0.027  PM 8M94W7D
BC 27 1710.7  -  1754.3 0.256 0.015  PM 1M09G7D
BC 27 1710.7  -  1754.3 0.216 0.015  PM 1M09W7D
BC 27 1720.0  -  1745.0 0.259 0.015  PM 18M0G7D
BC 27 1720.0  -  1745.0 0.209 0.015  PM 18M0W7D

Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 9.72 dBi at 800 MHz and/or 850 MHz, 7.51 dBi at 1900 MHz, 9.74 dBi at 700 MHz and 5.78 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24 and 27. The Grantee is responsible for providing the documentation required for modular use.

C2PC to mount this module on the carrier board, as documented in this filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To: