FCC ID N7NSL5011

multi-band wireless modem

by Sierra Wireless Inc.

Grantee Code: N7N   Product Code: SL5011
Latest application date: 2013-08-25

FCC ID Device Details

FCC IDN7NSL5011
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeN7N
Product CodeSL5011
Applicant BusinessSierra Wireless Inc. 🇨🇦
Related Domains sierrawireless.com
Equipment Classmulti-band wireless modem
Test FirmSGS Taiwan Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.7-848.31 MHzClass II permissive change or modification of presently authorized equipment2013-08-25
824.7-848.31 MHzOriginal Equipment2011-04-29

Exhibits

DocumentTypeAvailableFile
AirPrime - SL3010T - Hardware Integration Guide - Rev1.1Users Manual2013-08-25PDF 1.1 MB
User Manual RevisedUsers Manual2011-10-10PDF 399.8 KB
Internal Photos revInternal Photos2011-10-10PDF 236 KB
Photos IntInternal Photos2011-10-10PDF 160.7 KB
Photos ExtExternal Photos2011-10-10PDF 101.8 KB
LabelID Label/Location Info2011-04-29PDF 51.1 KB
Photos Test SetupTest Setup Photos2011-10-10PDF 355.6 KB
Photos Test Setup ConductedTest Setup Photos2011-10-10PDF 1.7 MB
SL3010t FCC Parts22,24 Verification reportTest Report2013-08-25PDF 359.9 KB
Test report conductedTest Report2011-04-29PDF 776.5 KB
Test report radiatedTest Report2011-04-29PDF 678 KB
FCC C2PC letter_v2Cover Letter(s)2013-08-25PDF 97.6 KB
Auth Ltr 1Cover Letter(s)2011-04-29PDF 23.5 KB
Conf LtrCover Letter(s)2011-04-29PDF 53.9 KB
Modular Approval Checklist revCover Letter(s)2011-04-29PDF 38.4 KB
Quth Ltr 2Cover Letter(s)2011-04-29PDF 42 KB
Signature AuthCover Letter(s)2011-04-29PDF 44.2 KB
MPERF Exposure Info2011-04-29PDF 31 KB

Application Information

Application IDQEvsZgGdrvIYcXwhQA2tHQ==
Final Action Date2013-08-25
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0005810874
ModelSL5011
Frequency Range824.7-848.31 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device Descriptionmulti-band wireless modem
Responsible PartyYing Wang, Manager, Regulatory Compliance, ywang@SierraWireless.com , 604-232-1440
Technical ContactYing Wang, Sierra Wireless Inc.,, ywang@sierrawireless.com , 1-604-231-1100
Test FirmJason Lin, SGS Taiwan Ltd., jason.lin@sgs.com , 886-2-2299-3279
TCB Emailhotline@acbcert.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is peak conducted. Modular Approval for use as a module in mobile-only exposure conditions. Antenna gain including cable loss must not exceed 8.5 dBi in Cellular Band and 4.15 dBi in the PCS band, for purposes of 2.1091. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss, must satisfy the MPE categorical exclusion requirements of 2.1091. This device is allowed only for OEM integration into host products. Consumer or end­user installation is not allowed. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co­located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi­transmitter product guidelines. End­users must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. C2PC to disable the EVDO mode as documented in this filing.

Applications

Application IDDatePurpose
QEvsZgGdrvIYcXwhQA2tHQ==2013-08-25Class II permissive change or modification of presently authorized equipment
EiOATE6JpJ0MlZvDh5gCWQ==2011-04-29Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
824.7-848.31 MHz0.7052.5ppm1M28F9W22HBC
824.7-848.31 MHz0.7482.5ppm1M27F9W22HBC
1851.25-1908.75 MHz0.7292.5ppm1M28F9W24EBC
1851.25-1908.75 MHz0.7672.5ppm1M29F9W24EBC

Grants

TCB Grant - Application QEvsZgGdrvIYcXwhQA2tHQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 08/25/2013

Application Dated: 08/05/2013
Sierra Wireless Inc.
13811 Wireless Way
Richmond, BC, V6V 3A4
Canada
 
Attention: Ying Wang , Manager, Regulatory Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N7NSL5011
Name of Grantee:  Sierra Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: multi-band wireless modem
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.7  -  848.31 0.705 2.5  PM 1M28F9W
BC 24E 1851.25  -  1908.75 0.729 2.5  PM 1M28F9W
BC 22H 824.7  -  848.31 0.748 2.5  PM 1M27F9W
BC 24E 1851.25  -  1908.75 0.767 2.5  PM 1M29F9W

Output power listed is peak conducted. Modular Approval for use as a module in mobile-only exposure conditions. Antenna gain including cable loss must not exceed 8.5 dBi in Cellular Band and 4.15 dBi in the PCS band, for purposes of 2.1091. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss, must satisfy the MPE categorical exclusion requirements of 2.1091. This device is allowed only for OEM integration into host products. Consumer or end­user installation is not allowed. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co­located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi­transmitter product guidelines. End­users must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations.

C2PC to disable the EVDO mode as documented in this filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application QEvsZgGdrvIYcXwhQA2tHQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sierra Wireless Inc.
13811 Wireless Way
Richmond, BC, V6V 3A4
Canada
  Date of Grant: 08/25/2013

Application Dated: 08/05/2013
 
Attention: Ying Wang , Manager, Regulatory Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N7NSL5011
Name of Grantee:  Sierra Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: multi-band wireless modem
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.7  -  848.31 0.705 2.5  PM 1M28F9W
BC 24E 1851.25  -  1908.75 0.729 2.5  PM 1M28F9W
BC 22H 824.7  -  848.31 0.748 2.5  PM 1M27F9W
BC 24E 1851.25  -  1908.75 0.767 2.5  PM 1M29F9W

Output power listed is peak conducted. Modular Approval for use as a module in mobile-only exposure conditions. Antenna gain including cable loss must not exceed 8.5 dBi in Cellular Band and 4.15 dBi in the PCS band, for purposes of 2.1091. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss, must satisfy the MPE categorical exclusion requirements of 2.1091. This device is allowed only for OEM integration into host products. Consumer or end­user installation is not allowed. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co­located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi­transmitter product guidelines. End­users must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations.

C2PC to disable the EVDO mode as documented in this filing.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application EiOATE6JpJ0MlZvDh5gCWQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/29/2011

Application Dated: 04/29/2011
Sierra Wireless Inc.
13811 Wireless Way
Richmond, BC, V6V 3A4
Canada
 
Attention: Ying Wang , Manager, Regulatory Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N7NSL5011
Name of Grantee:  Sierra Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: multi-band wireless modem
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.7  -  848.31 0.705 2.5  PM 1M28F9W
BC 22H 824.7  -  848.31 0.748 2.5  PM 1M27F9W
BC 24E 1851.25  -  1908.75 0.729 2.5  PM 1M28F9W
BC 24E 1851.25  -  1908.75 0.767 2.5  PM 1M29F9W

Output power listed is peak conducted. Modular Approval for use as a module in mobile-only exposure conditions. Antenna gain including cable loss must not exceed 8.5 dBi in Cellular Band and 4.15 dBi in the PCS band, for purposes of 2.1091. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss, must satisfy the MPE categorical exclusion requirements of 2.1091. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product guidelines. End-users must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application EiOATE6JpJ0MlZvDh5gCWQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sierra Wireless Inc.
13811 Wireless Way
Richmond, BC, V6V 3A4
Canada
  Date of Grant: 04/29/2011

Application Dated: 04/29/2011
 
Attention: Ying Wang , Manager, Regulatory Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  N7NSL5011
Name of Grantee:  Sierra Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: multi-band wireless modem
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.7  -  848.31 0.705 2.5  PM 1M28F9W
BC 22H 824.7  -  848.31 0.748 2.5  PM 1M27F9W
BC 24E 1851.25  -  1908.75 0.729 2.5  PM 1M28F9W
BC 24E 1851.25  -  1908.75 0.767 2.5  PM 1M29F9W

Output power listed is peak conducted. Modular Approval for use as a module in mobile-only exposure conditions. Antenna gain including cable loss must not exceed 8.5 dBi in Cellular Band and 4.15 dBi in the PCS band, for purposes of 2.1091. The antenna installation and operating configurations of this transmitter, including antenna gain and cable loss, must satisfy the MPE categorical exclusion requirements of 2.1091. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product guidelines. End-users must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To: