FCC ID N8NLSD4BT-S98
S98 BLE Module
by Lierda Science & Technology Group Co.,Ltd
Grantee Code: N8N Product Code: LSD4BTS98
Latest application date: 2023-11-20
FCC ID Device Details
| FCC ID | N8NLSD4BT-S98 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | N8N |
| Product Code | LSD4BTS98 |
| Applicant Business | Lierda Science & Technology Group Co.,Ltd 🇨🇳 |
| Related Domains |  lierda.com |
| Equipment Class | S98 BLE Module |
| Test Firm | Shenzhen Morlab Communications Technology Co. Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-11-20 |
| 2402-2480 MHz | Original Equipment | 2022-11-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User_manual | Users Manual | 2023-05-03 | PDF 1.7 MB |
| InternalPhotos | Internal Photos | 2023-05-03 | PDF 599.3 KB |
| ExternalPhotos | External Photos | 2023-05-03 | PDF 287.5 KB |
| Label | ID Label/Location Info | 2022-11-03 | PDF 250.9 KB |
| TestSetupPhotos | Test Setup Photos | 2023-05-03 | PDF 409 KB |
| Antenna_1_spec | Test Report | 2022-11-03 | PDF 1.3 MB |
| Antenna_2_spec | Test Report | 2022-11-03 | PDF 1.1 MB |
| SZ22090126W01_Lierda_S98B_BLE_DTS | Test Report | 2022-11-03 | PDF 5.8 MB |
| Attestation_Statement_Agent_Letter | Attestation Statements | 2023-11-20 | PDF 156.8 KB |
| Attestation_Statement_COVERED_EQUIPMENT | Attestation Statements | 2023-11-20 | PDF 72 KB |
| C2PC_Request_Letter | Cover Letter(s) | 2023-11-20 | PDF 56.5 KB |
| POA | Cover Letter(s) | 2023-11-20 | PDF 62.4 KB |
| AuthorizationLetter | Cover Letter(s) | 2022-11-03 | PDF 53.1 KB |
| ConfidentialityRequestLetter | Cover Letter(s) | 2022-11-03 | PDF 112 KB |
| DeclarationLetter | Cover Letter(s) | 2022-11-03 | PDF 113.8 KB |
| Modular_request_letter | Cover Letter(s) | 2022-11-03 | PDF 33.4 KB |
| SZ22090126S01_RF Exposure | RF Exposure Info | 2023-11-20 | PDF 317.1 KB |
| SZ22090126S01_Lierda_S98B_FCC_RFExposure | RF Exposure Info | 2022-11-03 | PDF 317.1 KB |
| Block_diagram Metadata only | Block Diagram | PDF 91.7 KB | |
| Schematic Metadata only | Schematics | PDF 130.7 KB | |
| Operational_description Metadata only | Operational Description | PDF 330 KB |
Application Information
| Application ID | zZZSfdfoXgg6p5OUVXl2Xw== |
|---|---|
| Final Action Date | 2023-11-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0021745146 |
| Model | LSD4BT-S98 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | S98 BLE Module |
| Responsible Party | Qingqing Sun, Certified Engineer, sunqq@lierda.com , 18067988687 |
| Test Firm | Mr. Su Feng, Shenzhen Morlab Communications Technology Co. Ltd., Zx.sun@morlab.cn  , +86 755 36698566 |
| TCB Email | bentje.holger@phoenix-testlab.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Output power is maximum peak conducted.Single Module approval is filing. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4).The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| zZZSfdfoXgg6p5OUVXl2Xw== | 2023-11-20 | Class II permissive change or modification of presently authorized equipment |
| j4y8DNNfSRtTSwzLRzWhPw== | 2022-11-03 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0038000 | 15C |
Grants
TCB Grant - Application zZZSfdfoXgg6p5OUVXl2Xw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 11/20/2023 Application Dated: 11/16/2023 |
| Lierda Science & Technology Group Co.,Ltd |
| Building 1#, Lierda IOT park, No.1326 Wenyi Xi Rd |
| Hangzhou, 311121 China |
| Attention: Qingqing Sun , Certified Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N8NLSD4BT-S98 |
| Name of Grantee: | Lierda Science & Technology Group Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | S98 BLE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0038 |
| Output power is maximum peak conducted. Single Module approval is filing. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
EAS Grant - Application zZZSfdfoXgg6p5OUVXl2Xw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lierda Science & Technology Group Co.,Ltd Building 1#, Lierda IOT park, No.1326 Wenyi Xi Rd Hangzhou, 311121 China |
Date of Grant: 11/20/2023 Application Dated: 11/16/2023 |
| Attention: Qingqing Sun , Certified Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N8NLSD4BT-S98 |
| Name of Grantee: | Lierda Science & Technology Group Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | S98 BLE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0038 |
| Output power is maximum peak conducted. Single Module approval is filing. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 11/03/2022 Application Dated: 11/03/2022 |
| Lierda Science & Technology Group Co.,Ltd |
| Building 1#, Lierda IOT park, No.1326 Wenyi Xi Rd |
| Hangzhou, 311121 China |
| Attention: Qingqing Sun , Certified Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N8NLSD4BT-S98 |
| Name of Grantee: | Lierda Science & Technology Group Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | S98 BLE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0038 |
| Output power is maximum peak conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
EAS Grant - Application j4y8DNNfSRtTSwzLRzWhPw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lierda Science & Technology Group Co.,Ltd Building 1#, Lierda IOT park, No.1326 Wenyi Xi Rd Hangzhou, 311121 China |
Date of Grant: 11/03/2022 Application Dated: 11/03/2022 |
| Attention: Qingqing Sun , Certified Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N8NLSD4BT-S98 |
| Name of Grantee: | Lierda Science & Technology Group Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | S98 BLE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0038 |
| Output power is maximum peak conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| Mail To: |