FCC ID NBZNRMUNDP-1D
UNDP-1 PCI Express Mini Card
by Novatel Wireless, Inc.
Grantee Code: NBZ Product Code: NRMUNDP1D
Latest application date: 2009-10-21
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2009-10-21 |
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2009-10-20 |
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2009-09-25 |
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2009-09-10 |
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2009-05-15 |
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2009-04-28 |
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2009-04-08 |
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2009-02-04 |
| 824.2-848.8 MHz | Change in identification of presently authorized equipment. Original FCC ID: J9CUNDP-1D Grant Date: 09/08/2008 | 2008-12-23 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2009-10-25 | PDF 21.1 KB |
| Host User Manual | Users Manual | 2009-10-20 | PDF 687.9 KB |
| WWAN portion of User manual | Users Manual | 2009-10-20 | PDF 674.9 KB |
| User Manual 1 | Users Manual | 2009-05-15 | PDF 1.1 MB |
| User Manual 2 | Users Manual | 2009-05-15 | PDF 25 KB |
| USER MANUAL | Users Manual | 2009-04-08 | PDF 21.1 KB |
| User Manual | Users Manual | 2008-12-23 | PDF 25.3 KB |
| Antenna location and separation distance | Internal Photos | 2009-10-20 | PDF 219.4 KB |
| Internal Photos | Internal Photos | 2009-05-15 | PDF 225.7 KB |
| BACKSIDE WITH COVER OPEN | Internal Photos | 2009-04-08 | PDF 286 KB |
| KEYBOARD AND BEZEL REMOVED | Internal Photos | 2009-04-08 | PDF 206.6 KB |
| LCD WITH ANTENNAS | Internal Photos | 2009-04-08 | PDF 196.1 KB |
| LEFT SIDE ANTENNAS | Internal Photos | 2009-04-08 | PDF 157.1 KB |
| RIGHT SIDE ANTENNAS | Internal Photos | 2009-04-08 | PDF 165.9 KB |
| TOP SIDE KEYBOARD AND BEZEL REMOVED - (model MINI-COOPER) | Internal Photos | 2009-04-08 | PDF 281 KB |
| External Photos | External Photos | 2009-09-25 | PDF 153 KB |
| External Photos | External Photos | 2009-05-15 | PDF 209.3 KB |
| BACKSIDE | External Photos | 2009-04-08 | PDF 214.3 KB |
| EXTERNAL PHOTOS - module only | External Photos | 2009-04-08 | PDF 209.3 KB |
| EXTERNAL TOP | External Photos | 2009-04-08 | PDF 144.3 KB |
| LAPTOP WITH LID OPEN | External Photos | 2009-04-08 | PDF 170 KB |
| External photos | External Photos | 2008-12-23 | PDF 207.8 KB |
| Label layout | ID Label/Location Info | 2009-10-20 | PDF 221.9 KB |
| Module ID label | ID Label/Location Info | 2009-10-20 | PDF 249 KB |
| Label and Location | ID Label/Location Info | 2009-05-15 | PDF 934 KB |
| LABEL C088DA02 DAO 5300 | ID Label/Location Info | 2009-04-08 | PDF 344.2 KB |
| LABEL J295CA00 DAO 5100 | ID Label/Location Info | 2009-04-08 | PDF 349.1 KB |
| LABEL K424CA00 DAO 1397 | ID Label/Location Info | 2009-04-08 | PDF 344 KB |
| LABEL K468CA01 DAO 1510 | ID Label/Location Info | 2009-04-08 | PDF 372.8 KB |
| LABEL LOCATION | ID Label/Location Info | 2009-04-08 | PDF 140.1 KB |
| LABEL P976GA00 UWB410 | ID Label/Location Info | 2009-04-08 | PDF 366.6 KB |
| LABEL R468HA00 WW BT365 | ID Label/Location Info | 2009-04-08 | PDF 392.8 KB |
| LABEL WWAN UNDP 1 NBZNRMUNDP 1D | ID Label/Location Info | 2009-04-08 | PDF 34.6 KB |
| Label and Location | ID Label/Location Info | 2009-02-04 | PDF 901.9 KB |
| Label format and location | ID Label/Location Info | 2008-12-23 | PDF 752.3 KB |
| SAR Test Setup Photos | Test Setup Photos | 2009-10-21 | PDF 2.3 MB |
| SAR Test Report | RF Exposure Info | 2009-10-20 | PDF 1.8 MB |
| Test Report | Test Report | 2009-10-20 | PDF 530.8 KB |
| Test Report 1 | Test Report | 2009-05-15 | PDF 67 KB |
| Test Report 2 | Test Report | 2009-05-15 | PDF 65.9 KB |
| Test Report 3 | Test Report | 2009-05-15 | PDF 67.3 KB |
| Test Report 4 | Test Report | 2009-05-15 | PDF 67.4 KB |
| Test Report 5 | Test Report | 2009-05-15 | PDF 281.8 KB |
| Test Report 6 | Test Report | 2009-05-15 | PDF 281.8 KB |
| Test Report 2 | Test Report | 2009-02-04 | PDF 66 KB |
| Test Report 1 | Test Report | 2009-02-04 | PDF 67 KB |
| Test Report 3 | Test Report | 2009-02-04 | PDF 67.3 KB |
| Test Report 4 | Test Report | 2009-02-04 | PDF 67.4 KB |
| Auxiliary Antenna Functionality Letter | Attestation Statements | 2009-10-21 | PDF 262.4 KB |
| DECLARATION OF CONFORMITY | Attestation Statements | 2009-04-08 | PDF 122.8 KB |
| FCC Agent Authorization | Attestation Statements | 2009-04-08 | PDF 17.4 KB |
| KDB FCC RESPONSE TO INQUIRY - 427167 | Attestation Statements | 2009-04-08 | PDF 77.4 KB |
| Class II Cover Letter | Cover Letter(s) | 2009-10-21 | PDF 409.2 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2009-10-21 | PDF 857.5 KB |
| Supplemental Response to NBZ91199 | Cover Letter(s) | 2009-10-21 | PDF 57.3 KB |
| Authorization letter | Cover Letter(s) | 2009-10-20 | PDF 405.1 KB |
| Class II permissive change cover letter | Cover Letter(s) | 2009-10-20 | PDF 439.3 KB |
| Previous compliance history | Cover Letter(s) | 2009-10-20 | PDF 55.3 KB |
| Request for confidentiality letter | Cover Letter(s) | 2009-10-20 | PDF 357.7 KB |
| TCB Q and A | Cover Letter(s) | 2009-10-20 | PDF 82.1 KB |
| Confidentiality Letter | Cover Letter(s) | 2009-09-25 | PDF 13.3 KB |
| Permissive Change Letter | Cover Letter(s) | 2009-09-25 | PDF 494.2 KB |
| Confidentiality Letter | Cover Letter(s) | 2009-09-10 | PDF 13.4 KB |
| Permissive Change Letter | Cover Letter(s) | 2009-09-10 | PDF 513 KB |
| Authorization Letter | Cover Letter(s) | 2009-05-15 | PDF 17.4 KB |
| Confidentiality Letter | Cover Letter(s) | 2009-05-15 | PDF 56.7 KB |
| Cover Letter | Cover Letter(s) | 2009-05-15 | PDF 39 KB |
| Host Letter | Cover Letter(s) | 2009-05-15 | PDF 34.9 KB |
| Permissive Change Letter | Cover Letter(s) | 2009-05-15 | PDF 68.4 KB |
| Authorization Letter | Cover Letter(s) | 2009-04-28 | PDF 31.1 KB |
| Confidentiality Letter | Cover Letter(s) | 2009-04-28 | PDF 12.7 KB |
| Permissive Change Letter | Cover Letter(s) | 2009-04-28 | PDF 515.3 KB |
| C2PC LETTER | Cover Letter(s) | 2009-04-08 | PDF 66 KB |
| COLLOCATION LETTER | Cover Letter(s) | 2009-04-08 | PDF 37.6 KB |
| Confidentiality Letter Rev 2 | Cover Letter(s) | 2009-04-08 | PDF 51.5 KB |
| Host certification letter Rev2 | Cover Letter(s) | 2009-04-08 | PDF 28.7 KB |
| Response to FCC Correspondence 37256 | Cover Letter(s) | 2009-04-08 | PDF 12.4 KB |
| Agency | Cover Letter(s) | 2009-02-04 | PDF 17.4 KB |
| Confidentiality Letter | Cover Letter(s) | 2009-02-04 | PDF 396.7 KB |
| Contact Letter | Cover Letter(s) | 2009-02-04 | PDF 16.4 KB |
| Cover Letter | Cover Letter(s) | 2009-02-04 | PDF 77.4 KB |
| Permissive Change Letter | Cover Letter(s) | 2009-02-04 | PDF 23.3 KB |
| Authorization letter | Cover Letter(s) | 2008-12-23 | PDF 127.3 KB |
| Authorization letter from Qualcomm | Cover Letter(s) | 2008-12-23 | PDF 13.3 KB |
| Multiple listing request letter | Cover Letter(s) | 2008-12-23 | PDF 20.2 KB |
| Request for confidential | Cover Letter(s) | 2008-12-23 | PDF 14.7 KB |
| RF Exposure Info | RF Exposure Info | 2009-10-21 | PDF 1.6 MB |
| SAR Report | RF Exposure Info | 2009-10-21 | PDF 704.1 KB |
| RF Exposure MPE | RF Exposure Info | 2009-09-25 | PDF 107.8 KB |
| RF Exposure MPE | RF Exposure Info | 2009-09-10 | PDF 107.6 KB |
| RF Exposure MPE | RF Exposure Info | 2009-04-28 | PDF 108.5 KB |
| MPE CALCULATIONS - other fccid J9CUNDP-1D | RF Exposure Info | 2009-04-08 | PDF 281.8 KB |
| SAR report | RF Exposure Info | 2009-04-08 | PDF 3.9 MB |
| RF Exposure SAR | RF Exposure Info | 2009-02-04 | PDF 2.1 MB |
| MPE | RF Exposure Info | 2008-12-23 | PDF 278.9 KB |
Application Information
| Application ID | DnhBSua84driTNFUR0oZAA== |
|---|---|
| Final Action Date | 2009-10-21 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018384537 |
| Model | NRMUNDP-1D |
| Frequency Range | 824.2-848.8 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | UNDP-1 PCI Express Mini Card |
| Responsible Party | Bill Babbitt, Manager- Regulatory Engineering, bbabbitt@nvtl.com  , 858-812-3400 |
| Technical Contact | Randy Ortanez, PCTEST Engineering Laboratory, Inc., randy@pctestlab.com  , 410-290-6652 |
| Test Firm | Randy Ortanez, PCTEST Engineering Laboratory, Inc., randy@pctestlab.com , 410-290-6652 |
| TCB Email | randy@pctestlab.com |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class II Permissive Change Output power listed is conducted; highest radiated power measured in filings under this FCC ID is: Part 22, 2.26 W ERP; Part 24, 1.70 W EIRP. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For use in mobile RF exposure conditions, antenna gain including cable loss must not exceed as documented in filings under this FCC ID, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Mobile Co-located Configurations have been evaluated as shown in applications under this FCC ID. For use in portable exposure conditions, SAR compliance was demonstrated for device in specific multi-transmitter final product configuration(s) operating in portable RF exposure conditions as described in filing - other configurations require separate SAR routine evaluations where applicable; consumer or end-user installation is allowed per module and host-device installation and authentication methods as described in filing. The highest reported body SAR values for filings under this FCC ID, single- and co-transmitting with associated FCC IDs, are: Part 22 - 0.73 W/kg; Part 24 - 1.407 W/kg |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| DnhBSua84driTNFUR0oZAA== | 2009-10-21 | Class II permissive change or modification of presently authorized equipment |
| 6xhC75/lzpy8OAgGlo7j9w== | 2009-10-20 | Class II permissive change or modification of presently authorized equipment |
| OPSVfkGNEzfqhye9s490AQ== | 2009-09-25 | Class II permissive change or modification of presently authorized equipment |
| ST6IWYE6u3Z82f7TjPMzug== | 2009-09-10 | Class II permissive change or modification of presently authorized equipment |
| eMTpjdqJA8kTOsyssahwQw== | 2009-05-15 | Class II permissive change or modification of presently authorized equipment |
| 06Vputgknhyb9fAAd7D8fQ== | 2009-04-28 | Class II permissive change or modification of presently authorized equipment |
| O9PVwbs8OmtvIRBsot0DyA== | 2009-04-08 | Class II permissive change or modification of presently authorized equipment |
| NGdedusV9UekW6/n4zXRHg== | 2009-02-04 | Class II permissive change or modification of presently authorized equipment |
| aGJImFTDCkbXXqvPPQzJKQ== | 2008-12-23 | Change in identification of presently authorized equipment. Original FCC ID: J9CUNDP-1D Grant Date: 09/08/2008 |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules |
|---|---|---|---|---|
| 824.2-848.8 MHz | 1.986 | 2.5ppm | 248KGXW | 22H |
| 824.2-848.8 MHz | 0.607 | 2.5ppm | 248KG7W | 22H |
| 824.7-848.31 MHz | 0.31 | 2.5ppm | 1M28F9W | 22H |
| 826.4-846.6 MHz | 0.277 | 2.5ppm | 4M18F9W | 22H |
| 1850.2-1909.8 MHz | 0.885 | 2.5ppm | 250KGXW | 24E |
| 1850.2-1909.8 MHz | 0.48 | 2.5ppm | 245KG7W | 24E |
| 1851.25-1908.75 MHz | 0.289 | 2.5ppm | 1M28F9W | 24E |
| 1852.4-1907.5 MHz | 0.286 | 2.5ppm | 4M19F9W | 24E |
Grants
TCB Grant - Application ST6IWYE6u3Z82f7TjPMzug==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/10/2009 Application Dated: 09/10/2009 |
| Novatel Wireless, Inc. |
| 9645 Scranton Road |
| Suite 205 |
| San Diego, CA 92121 |
| Attention: Bill Babbitt , Manager- Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NBZNRMUNDP-1D |
| Name of Grantee: | Novatel Wireless, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UNDP-1PCI EXPRESS MINI CARD |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.986 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.607 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.277 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.31 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.885 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.48 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.286 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.289 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in filings under this FCC ID is:Part 22, 2.26 W ERP; Part 24, 1.70 W EIRP. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication,or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For use in mobile RF exposure conditions, antenna gain including cable loss must not exceed as documented in filings under this FCC ID, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. For use in portable exposure conditions, SAR compliance was demonstrated for device in specific multi-transmitter final product configuration(s) operating in portable RF exposure conditions as described in filing - other configurations require separate SAR routine evaluations where applicable; consumer or end-user installation is allowed per module and host-device installation and authentication methods as described in filing. The highest reported body SAR values for filings under this FCC ID, single- and co-transmitting with associated FCC IDs, are: Part 22 - 0.73 W/kg; Part 24 - 1.407 W/kg |
EAS Grant - Application ST6IWYE6u3Z82f7TjPMzug==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Novatel Wireless, Inc. 9645 Scranton Road Suite 205 San Diego, CA 92121 United States |
Date of Grant: 09/10/2009 Application Dated: 09/10/2009 |
| Attention: Bill Babbitt , Manager- Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NBZNRMUNDP-1D |
| Name of Grantee: | Novatel Wireless, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UNDP-1PCI EXPRESS MINI CARD |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.986 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.607 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.277 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.31 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.885 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.48 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.286 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.289 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in filings under this FCC ID is:Part 22, 2.26 W ERP; Part 24, 1.70 W EIRP. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication,or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For use in mobile RF exposure conditions, antenna gain including cable loss must not exceed as documented in filings under this FCC ID, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. For use in portable exposure conditions, SAR compliance was demonstrated for device in specific multi-transmitter final product configuration(s) operating in portable RF exposure conditions as described in filing - other configurations require separate SAR routine evaluations where applicable; consumer or end-user installation is allowed per module and host-device installation and authentication methods as described in filing. The highest reported body SAR values for filings under this FCC ID, single- and co-transmitting with associated FCC IDs, are: Part 22 - 0.73 W/kg; Part 24 - 1.407 W/kg |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/25/2009 Application Dated: 09/24/2009 |
| Novatel Wireless, Inc. |
| 9645 Scranton Road |
| Suite 205 |
| San Diego, CA 92121 |
| Attention: Bill Babbitt , Manager- Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NBZNRMUNDP-1D |
| Name of Grantee: | Novatel Wireless, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UNDP-1PCI EXPRESS MINI CARD |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.986 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.607 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.277 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.31 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.885 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.48 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.286 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.289 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in filings under this FCC ID is:Part 22, 2.26 W ERP; Part 24, 1.70 W EIRP. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication,or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For use in mobile RF exposure conditions, antenna gain including cable loss must not exceed as documented in filings under this FCC ID, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Mobile Co-located Configurations have been evaluated as shown in applications under this FCC ID. For use in portable exposure conditions, SAR compliance was demonstrated for device in specific multi-transmitter final product configuration(s) operating in portable RF exposure conditions as described in filing - other configurations require separate SAR routine evaluations where applicable; consumer or end-user installation is allowed per module and host-device installation and authentication methods as described in filing. The highest reported body SAR values for filings under this FCC ID, single- and co-transmitting with associated FCC IDs, are: Part 22 - 0.73 W/kg; Part 24 - 1.407 W/kg |
EAS Grant - Application OPSVfkGNEzfqhye9s490AQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Novatel Wireless, Inc. 9645 Scranton Road Suite 205 San Diego, CA 92121 United States |
Date of Grant: 09/25/2009 Application Dated: 09/24/2009 |
| Attention: Bill Babbitt , Manager- Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NBZNRMUNDP-1D |
| Name of Grantee: | Novatel Wireless, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UNDP-1PCI EXPRESS MINI CARD |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.986 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.607 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.277 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.31 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.885 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.48 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.286 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.289 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in filings under this FCC ID is:Part 22, 2.26 W ERP; Part 24, 1.70 W EIRP. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication,or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For use in mobile RF exposure conditions, antenna gain including cable loss must not exceed as documented in filings under this FCC ID, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Mobile Co-located Configurations have been evaluated as shown in applications under this FCC ID. For use in portable exposure conditions, SAR compliance was demonstrated for device in specific multi-transmitter final product configuration(s) operating in portable RF exposure conditions as described in filing - other configurations require separate SAR routine evaluations where applicable; consumer or end-user installation is allowed per module and host-device installation and authentication methods as described in filing. The highest reported body SAR values for filings under this FCC ID, single- and co-transmitting with associated FCC IDs, are: Part 22 - 0.73 W/kg; Part 24 - 1.407 W/kg |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Novatel Wireless, Inc. 9645 Scranton Road Suite 205 San Diego, CA 92121 United States |
Date of Grant: 04/08/2009 Application Dated: 02/13/2009 |
| Attention: Bill Babbitt , Manager- Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NBZNRMUNDP-1D |
| Name of Grantee: | Novatel Wireless, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UNDP-1PCI EXPRESS MINI CARD |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.986 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.607 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.277 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.31 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.885 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.48 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.286 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.289 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in filings under this FCC ID is: Part 22, 2.26 W ERP; Part 24, 1.70 W EIRP. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For use in mobile RF exposure conditions, antenna gain including cable loss must not exceed as documented in filings under this FCC ID, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. For use in portable exposure conditions, SAR compliance was demonstrated for device in specific multi-transmitter final product configuration(s) operating in portable RF exposure conditions as described in filing - other configurations require separate SAR routine evaluations where applicable; consumer or end-user installation is allowed per module and host-device installation and authentication methods as described in filing. The highest reported body SAR values for filings under this FCC ID, single- and co-transmitting with associated FCC IDs, are: Part 22 - 0.73 W/kg; Part 24 - 1.407 W/kg.
|
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/04/2009 Application Dated: 02/04/2009 |
| Novatel Wireless, Inc. |
| 9645 Scranton Road |
| Suite 205 |
| San Diego, CA 92121 |
| Attention: Bill Babbitt , Manager- Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NBZNRMUNDP-1D |
| Name of Grantee: | Novatel Wireless, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UNDP-1 PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.986 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.607 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.277 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.31 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.885 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.48 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.286 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.289 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in filing are Part 22ERP 2.26 W, Part 24 EIRP 1.70 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters except those transmitter(s) identified in this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only the host and module have implemented two-way authentication to allow end user installation. Highest reported SAR value is: 1.407 W/kg. |
EAS Grant - Application NGdedusV9UekW6/n4zXRHg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Novatel Wireless, Inc. 9645 Scranton Road Suite 205 San Diego, CA 92121 United States |
Date of Grant: 02/04/2009 Application Dated: 02/04/2009 |
| Attention: Bill Babbitt , Manager- Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NBZNRMUNDP-1D |
| Name of Grantee: | Novatel Wireless, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UNDP-1 PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.986 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.607 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.277 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.31 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.885 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.48 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.286 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.289 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in filing are Part 22ERP 2.26 W, Part 24 EIRP 1.70 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters except those transmitter(s) identified in this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only the host and module have implemented two-way authentication to allow end user installation. Highest reported SAR value is: 1.407 W/kg. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/15/2009 Application Dated: 05/15/2009 |
| Novatel Wireless, Inc. |
| 9645 Scranton Road |
| Suite 205 |
| San Diego, CA 92121 |
| Attention: Bill Babbitt , Manager- Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NBZNRMUNDP-1D |
| Name of Grantee: | Novatel Wireless, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UNDP-1PCI EXPRESS MINI CARD |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.986 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.607 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.277 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.31 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.885 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.48 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.286 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.289 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in filings under this FCC ID is:Part 22, 2.26 W ERP; Part 24, 1.70 W EIRP. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication,or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For use in mobile RF exposure conditions, antenna gain including cable loss must not exceed as documented in filings under this FCC ID, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. For use in portable exposure conditions, SAR compliance was demonstrated for device in specific multi-transmitter final product configuration(s) operating in portable RF exposure conditions as described in filing - other configurations require separate SAR routine evaluations where applicable; consumer or end-user installation is allowed per module and host-device installation and authentication methods as described in filing. The highest reported body SAR values for filings under this FCC ID, single- and co-transmitting with associated FCC IDs, are: Part 22 - 0.73 W/kg; Part 24 - 1.407 W/kg |
EAS Grant - Application eMTpjdqJA8kTOsyssahwQw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Novatel Wireless, Inc. 9645 Scranton Road Suite 205 San Diego, CA 92121 United States |
Date of Grant: 05/15/2009 Application Dated: 05/15/2009 |
| Attention: Bill Babbitt , Manager- Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NBZNRMUNDP-1D |
| Name of Grantee: | Novatel Wireless, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UNDP-1PCI EXPRESS MINI CARD |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.986 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.607 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.277 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.31 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.885 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.48 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.286 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.289 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in filings under this FCC ID is:Part 22, 2.26 W ERP; Part 24, 1.70 W EIRP. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication,or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For use in mobile RF exposure conditions, antenna gain including cable loss must not exceed as documented in filings under this FCC ID, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. For use in portable exposure conditions, SAR compliance was demonstrated for device in specific multi-transmitter final product configuration(s) operating in portable RF exposure conditions as described in filing - other configurations require separate SAR routine evaluations where applicable; consumer or end-user installation is allowed per module and host-device installation and authentication methods as described in filing. The highest reported body SAR values for filings under this FCC ID, single- and co-transmitting with associated FCC IDs, are: Part 22 - 0.73 W/kg; Part 24 - 1.407 W/kg |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PCTEST Engineering Laboratory, Inc. 6660-B Dobbin Road Columbia, MD 21045 |
Date of Grant: 10/21/2009 Application Dated: 10/21/2009 |
| Novatel Wireless, Inc. |
| 9645 Scranton Road |
| Suite 205 |
| San Diego, CA 92121 |
| Attention: Bill Babbitt , Manager- Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NBZNRMUNDP-1D |
| Name of Grantee: | Novatel Wireless, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UNDP-1 PCI Express Mini Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.986 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.607 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.277 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.31 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.885 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.48 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.286 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.289 | 2.5 PM | 1M28F9W |
| Class II Permissive Change Output power listed is conducted; highest radiated power measured in filings under this FCC ID is: Part 22, 2.26 W ERP; Part 24, 1.70 W EIRP. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For use in mobile RF exposure conditions, antenna gain including cable loss must not exceed as documented in filings under this FCC ID, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Mobile Co-located Configurations have been evaluated as shown in applications under this FCC ID. For use in portable exposure conditions, SAR compliance was demonstrated for device in specific multi-transmitter final product configuration(s) operating in portable RF exposure conditions as described in filing - other configurations require separate SAR routine evaluations where applicable; consumer or end-user installation is allowed per module and host-device installation and authentication methods as described in filing. The highest reported body SAR values for filings under this FCC ID, single- and co-transmitting with associated FCC IDs, are: Part 22 - 0.73 W/kg; Part 24 - 1.407 W/kg |
EAS Grant - Application DnhBSua84driTNFUR0oZAA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Novatel Wireless, Inc. 9645 Scranton Road Suite 205 San Diego, CA 92121 United States |
Date of Grant: 10/21/2009 Application Dated: 10/21/2009 |
| Attention: Bill Babbitt , Manager- Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NBZNRMUNDP-1D |
| Name of Grantee: | Novatel Wireless, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UNDP-1 PCI Express Mini Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.986 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.607 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.277 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.31 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.885 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.48 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.286 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.289 | 2.5 PM | 1M28F9W |
| Class II Permissive Change Output power listed is conducted; highest radiated power measured in filings under this FCC ID is: Part 22, 2.26 W ERP; Part 24, 1.70 W EIRP. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For use in mobile RF exposure conditions, antenna gain including cable loss must not exceed as documented in filings under this FCC ID, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Mobile Co-located Configurations have been evaluated as shown in applications under this FCC ID. For use in portable exposure conditions, SAR compliance was demonstrated for device in specific multi-transmitter final product configuration(s) operating in portable RF exposure conditions as described in filing - other configurations require separate SAR routine evaluations where applicable; consumer or end-user installation is allowed per module and host-device installation and authentication methods as described in filing. The highest reported body SAR values for filings under this FCC ID, single- and co-transmitting with associated FCC IDs, are: Part 22 - 0.73 W/kg; Part 24 - 1.407 W/kg |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 12/23/2008 Application Dated: 12/23/2008 |
| Novatel Wireless, Inc. |
| 9645 Scranton Road |
| Suite 205 |
| San Diego, CA 92121 |
| Attention: Bill Babbitt , Manager- Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NBZNRMUNDP-1D |
| Name of Grantee: | Novatel Wireless, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UNDP-1 PCI Express Mini Card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.986 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.607 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.277 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.31 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.885 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.48 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.286 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.289 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in filing are Part 22 ERP 2.26 W, Part 24 EIRP 1.70 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters except those transmitter(s) identified in this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. . Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only the host and module have implemented two-way authentication to allow end user installation. |
EAS Grant - Application aGJImFTDCkbXXqvPPQzJKQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Novatel Wireless, Inc. 9645 Scranton Road Suite 205 San Diego, CA 92121 United States |
Date of Grant: 12/23/2008 Application Dated: 12/23/2008 |
| Attention: Bill Babbitt , Manager- Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NBZNRMUNDP-1D |
| Name of Grantee: | Novatel Wireless, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UNDP-1 PCI Express Mini Card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.986 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.607 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.277 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.31 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.885 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.48 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.286 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.289 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in filing are Part 22 ERP 2.26 W, Part 24 EIRP 1.70 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters except those transmitter(s) identified in this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. . Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only the host and module have implemented two-way authentication to allow end user installation. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 10/20/2009 Application Dated: 10/19/2009 |
| Novatel Wireless, Inc. |
| 9645 Scranton Road |
| Suite 205 |
| San Diego, CA 92121 |
| Attention: Bill Babbitt , Manager- Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NBZNRMUNDP-1D |
| Name of Grantee: | Novatel Wireless, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UNDP-1PCI EXPRESS MINI CARD |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.986 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.607 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.277 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.31 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.885 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.48 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.286 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.289 | 2.5 PM | 1M28F9W |
| Class II permissive change filing by adding portable host as documented in this filing. Output power listed is conducted; highest radiated power measured in filings under this FCC ID is:Part 22, 2.26 W ERP; Part 24, 1.70 W EIRP. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication,or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For use in mobile RF exposure conditions, antenna gain including cable loss must not exceed as documented in filings under this FCC ID, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. For use in portable exposure conditions, SAR compliance was demonstrated for device in specific multi-transmitter final product configuration(s) operating in portable RF exposure conditions as described in filing - other configurations require separate SAR routine evaluations where applicable; consumer or end-user installation is allowed per module and host-device installation and authentication methods as described in filing. The highest reported body SAR values for filings under this FCC ID, single- and co-transmitting with associated FCC IDs, are: Part 22 - 0.73 W/kg; Part 24 - 1.407 W/kg |
EAS Grant - Application 6xhC75/lzpy8OAgGlo7j9w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Novatel Wireless, Inc. 9645 Scranton Road Suite 205 San Diego, CA 92121 United States |
Date of Grant: 10/20/2009 Application Dated: 10/19/2009 |
| Attention: Bill Babbitt , Manager- Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NBZNRMUNDP-1D |
| Name of Grantee: | Novatel Wireless, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UNDP-1PCI EXPRESS MINI CARD |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.986 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.607 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.277 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.31 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.885 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.48 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.286 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.289 | 2.5 PM | 1M28F9W |
| Class II permissive change filing by adding portable host as documented in this filing. Output power listed is conducted; highest radiated power measured in filings under this FCC ID is:Part 22, 2.26 W ERP; Part 24, 1.70 W EIRP. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication,or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For use in mobile RF exposure conditions, antenna gain including cable loss must not exceed as documented in filings under this FCC ID, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. For use in portable exposure conditions, SAR compliance was demonstrated for device in specific multi-transmitter final product configuration(s) operating in portable RF exposure conditions as described in filing - other configurations require separate SAR routine evaluations where applicable; consumer or end-user installation is allowed per module and host-device installation and authentication methods as described in filing. The highest reported body SAR values for filings under this FCC ID, single- and co-transmitting with associated FCC IDs, are: Part 22 - 0.73 W/kg; Part 24 - 1.407 W/kg |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/28/2009 Application Dated: 04/28/2009 |
| Novatel Wireless, Inc. |
| 9645 Scranton Road |
| Suite 205 |
| San Diego, CA 92121 |
| Attention: Bill Babbitt , Manager- Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NBZNRMUNDP-1D |
| Name of Grantee: | Novatel Wireless, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UNDP-1PCI EXPRESS MINI CARD |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.986 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.607 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.277 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.31 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.885 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.48 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.286 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.289 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in filings under this FCC ID is: Part 22, 2.26 W ERP; Part 24, 1.70 W EIRP. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For use in mobile RF exposure conditions, antenna gain including cable loss must not exceed as documented in filings under this FCC ID, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. For use in portable exposure conditions, SAR compliance was demonstrated for device in specific multi-transmitter final product configuration(s) operating in portable RF exposure conditions as described in filing - other configurations require separate SAR routine evaluations where applicable; consumer or end-user installation is allowed per module and host-device installation and authentication methods as described in filing. The highest reported body SAR values for filings under this FCC ID, single- and co-transmitting with associated FCC IDs, are: Part 22 - 0.73 W/kg; Part 24 - 1.407 W/kg |
EAS Grant - Application 06Vputgknhyb9fAAd7D8fQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Novatel Wireless, Inc. 9645 Scranton Road Suite 205 San Diego, CA 92121 United States |
Date of Grant: 04/28/2009 Application Dated: 04/28/2009 |
| Attention: Bill Babbitt , Manager- Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NBZNRMUNDP-1D |
| Name of Grantee: | Novatel Wireless, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UNDP-1PCI EXPRESS MINI CARD |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.986 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.607 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.277 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.31 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.885 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.48 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.286 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.289 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in filings under this FCC ID is: Part 22, 2.26 W ERP; Part 24, 1.70 W EIRP. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For use in mobile RF exposure conditions, antenna gain including cable loss must not exceed as documented in filings under this FCC ID, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. For use in portable exposure conditions, SAR compliance was demonstrated for device in specific multi-transmitter final product configuration(s) operating in portable RF exposure conditions as described in filing - other configurations require separate SAR routine evaluations where applicable; consumer or end-user installation is allowed per module and host-device installation and authentication methods as described in filing. The highest reported body SAR values for filings under this FCC ID, single- and co-transmitting with associated FCC IDs, are: Part 22 - 0.73 W/kg; Part 24 - 1.407 W/kg |
| Mail To: |