FCC ID NCM-RS500
Relay Sensor
by Option (Crescent NV)
Grantee Code: NCM Product Code: RS500
Latest application date: 2021-08-24
FCC ID Device Details
| FCC ID | NCM-RS500 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | NCM |
| Product Code | RS500 |
| Applicant Business | Option (Crescent NV) 🇧🇪 |
| Related Domains |  option.com |
| Equipment Class | Relay Sensor |
| Test Firm | 7layers GmbH |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.3-914.9 MHz | Original Equipment | 2021-08-24 |
| 903-914.2 MHz | Original Equipment | 2021-08-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2022-02-15 | PDF 861.5 KB |
| Internal Photos | Internal Photos | 2022-02-15 | PDF 197.8 KB |
| External Photos | External Photos | 2021-08-24 | PDF 222.8 KB |
| ID Label/Location Info | ID Label/Location Info | 2021-08-24 | PDF 198.9 KB |
| Test Setup Photos_DTS | Test Setup Photos | 2022-02-15 | PDF 1.3 MB |
| Test Report_DSS | Test Report | 2021-08-24 | PDF 3.2 MB |
| Test Report_DTS | Test Report | 2021-08-24 | PDF 2.6 MB |
| Declaration of authorization | Cover Letter(s) | 2021-08-24 | PDF 161.1 KB |
| Request for LT or STC confidentiality | Cover Letter(s) | 2021-08-24 | PDF 24.4 KB |
| MPE Report | RF Exposure Info | 2021-08-24 | PDF 57.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 60.2 KB | |
| Schematics Metadata only | Schematics | PDF 330.7 KB | |
| Antenna Metadata only | Operational Description | PDF 793.2 KB | |
| Operational Description Metadata only | Operational Description | PDF 123.6 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 20.9 KB |
Application Information
| Application ID | PlDhfOKxlEl8FmF4heDr0A== |
|---|---|
| Final Action Date | 2021-08-24 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0022935837 |
| Model | RS500 |
| Frequency Range | 902.3-914.9 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Relay Sensor |
| Responsible Party | Jasna Papuga, Certification engineer, j.papuga@option.com , +3216317411 |
| Agent | Abdellah Abdellah Abdellah, 7layers GmbH, Abdellah.Ahakki@7layers.com  , 49-2102-749-285 |
| Technical Contact | Jasna Papuga, Option (Crescent NV), j.papuga@option.com , 3216317411 |
| Non-Technical Contact | Jasna Papuga, Option (Crescent NV), j.papuga@option.com , 3216317411 |
| Test Firm | Bernhard Retka, 7layers GmbH, Bernhard.Retka@7layers.com , 0049 2102 749 452 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 02/15/2022 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| PlDhfOKxlEl8FmF4heDr0A== | 2021-08-24 | Original Equipment |
| +XkhCK86BNa3bOb0xhcn+A== | 2021-08-24 | Original Equipment |
Grants
TCB Grant - Application PlDhfOKxlEl8FmF4heDr0A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 08/24/2021 Application Dated: 08/18/2021 |
| Option (Crescent NV) |
| Gaston Geenslaan 14 |
| Leuven, 3001 Belgium |
| Attention: Jasna Papuga , Certification engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NCM-RS500 |
| Name of Grantee: | Option (Crescent NV) |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Relay Sensor |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.17 |
| Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application PlDhfOKxlEl8FmF4heDr0A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Option (Crescent NV) Gaston Geenslaan 14 Leuven, 3001 Belgium |
Date of Grant: 08/24/2021 Application Dated: 08/18/2021 |
| Attention: Jasna Papuga , Certification engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NCM-RS500 |
| Name of Grantee: | Option (Crescent NV) |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Relay Sensor |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 914.9 | 0.17 |
| Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 08/24/2021 Application Dated: 08/18/2021 |
| Option (Crescent NV) |
| Gaston Geenslaan 14 |
| Leuven, 3001 Belgium |
| Attention: Jasna Papuga , Certification engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NCM-RS500 |
| Name of Grantee: | Option (Crescent NV) |
| Equipment Class: | Digital Transmission System |
| Notes: | Relay Sensor |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.0 - 914.2 | 0.1 |
| Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application +XkhCK86BNa3bOb0xhcn+A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Option (Crescent NV) Gaston Geenslaan 14 Leuven, 3001 Belgium |
Date of Grant: 08/24/2021 Application Dated: 08/18/2021 |
| Attention: Jasna Papuga , Certification engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NCM-RS500 |
| Name of Grantee: | Option (Crescent NV) |
| Equipment Class: | Digital Transmission System |
| Notes: | Relay Sensor |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.0 - 914.2 | 0.1 |
| Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |