FCC ID NCMOMO6717

WWAN RF Module GTM671 WFS

by Option NV

Grantee Code: NCM   Product Code: OMO6717
Latest application date: 2012-01-05

FCC ID Device Details

FCC IDNCMOMO6717
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeNCM
Product CodeOMO6717
Applicant BusinessOption NV 🇧🇪
Related Domains option.com
Equipment ClassWWAN RF Module GTM671 WFS
Test FirmBureau Veritas CPS (H.K.) Ltd. Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2012-01-05
824.2-848.8 MHzClass II permissive change or modification of presently authorized equipment2012-01-05
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: NCMOMO6712 Grant Date: 05/06/20112011-12-30
824.2-848.8 MHzChange in identification of presently authorized equipment. Original FCC ID: NCMOMO6712 Grant Date: 05/06/20112011-12-30

Exhibits

DocumentTypeAvailableFile
internal photosInternal Photos2012-01-05PDF 62.4 KB
external photosExternal Photos2012-01-05PDF 177.4 KB
External PhotosExternal Photos2011-12-30PDF 70.8 KB
labelID Label/Location Info2012-01-05PDF 94.2 KB
ID Lable Location InfoID Label/Location Info2011-12-30PDF 174.6 KB
test setup photosTest Setup Photos2012-01-05PDF 225.6 KB
test setup photosTest Setup Photos2012-01-05PDF 265.5 KB
test reportTest Report2012-01-05PDF 224.5 KB
test reportTest Report2012-01-05PDF 188.2 KB
test reportTest Report2012-01-05PDF 223.6 KB
PoACover Letter(s)2012-01-05PDF 32.3 KB
class II permissive change letterCover Letter(s)2012-01-05PDF 312.7 KB
Agent Authorization LetterCover Letter(s)2011-12-30PDF 416.1 KB
Agent Authorization LetterCover Letter(s)2011-12-30PDF 46.6 KB
Change in ID RequestCover Letter(s)2011-12-30PDF 354.4 KB

Application Information

Application IDuA/kFwiJI7CPoaB/+lgp2w==
Final Action Date2012-01-05
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0022935837
ModelOMO6717
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWWAN RF Module GTM671 WFS
Responsible PartyJan Willems, Technical Coordinator Certification, j.willems@option.com , +3216311516
AgentDaniel Daniel Daniel, Bureau Veritas Consumer Products Services (H.K)Ltd, daniel-ch.lee@tw.bureauveritas.com , 886-3-3183232
Test FirmTommy Wu, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, tommy.wu@tw.bureauveritas.com , 886-2-2605-2180-3
TCB Emailbrandhorst.dirk@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Class II Permissive Change: The PCB has been extended to a full size form factor in order to have space to put on (U)SIM on the top side and microSD interface on the bottom side.

Applications

Application IDDatePurpose
uA/kFwiJI7CPoaB/+lgp2w==2012-01-05Class II permissive change or modification of presently authorized equipment
thmyeFKh54Px8g5GFysmhw==2012-01-05Class II permissive change or modification of presently authorized equipment
mJ31NucItxKCAI5KKzMdNA==2012-01-05Class II permissive change or modification of presently authorized equipment
sa6KHQ4Zdo/jgL5i+h8dAg==2011-12-30Change in identification of presently authorized equipment. Original FCC ID: NCMOMO6712 Grant Date: 05/06/2011
W84UzUcCfjWY63wh5uE9uA==2011-12-30Change in identification of presently authorized equipment. Original FCC ID: NCMOMO6712 Grant Date: 05/06/2011
GY+4FPNuciT7joszBKNJ0A==2011-12-30Change in identification of presently authorized equipment. Original FCC ID: NCMOMO6712 Grant Date: 05/06/2011

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
15BCC
824.2-848.8 MHz1.1250.04ppm244KGXW22HCC
824.2-848.8 MHz0.3560.05ppm244KG7W22HCC
826.4-846.6 MHz0.1060.04ppm4M14F9W22HCC
1850.2-1909.8 MHz0.9790.03ppm248KGXW24ECC
1850.2-1909.8 MHz0.5080.03ppm244KG7W24ECC
1852.4-1907.6 MHz0.2620.03ppm4M16F9W24ECC
2412-2462 MHz0.14615CCC
2422-2452 MHz0.08715CCC

Grants

TCB Grant - Application W84UzUcCfjWY63wh5uE9uA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 12/30/2011

Application Dated: 12/30/2011
Option NV
Gaston Geenslaan 14
Leuven, 3001
Belgium
 
Attention: Jan Willems , Technical Coordinator Certification

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NCMOMO6717
Name of Grantee:  Option NV
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: WWAN RF Module GTM671 WFS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application W84UzUcCfjWY63wh5uE9uA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Option NV
Gaston Geenslaan 14
Leuven, 3001
Belgium
  Date of Grant: 12/30/2011

Application Dated: 12/30/2011
 
Attention: Jan Willems , Technical Coordinator Certification

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NCMOMO6717
Name of Grantee:  Option NV
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: WWAN RF Module GTM671 WFS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application uA/kFwiJI7CPoaB/+lgp2w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 01/05/2012

Application Dated: 01/05/2012
Option NV
Gaston Geenslaan 14
Leuven, 3001
Belgium
 
Attention: Jan Willems , Technical Coordinator Certification

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NCMOMO6717
Name of Grantee:  Option NV
Equipment Class: Digital Transmission System
Notes: WWAN RF Module GTM671 WFS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.146  
CC 15C 2422.0  -  2452.0 0.087  

Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Class II Permissive Change: The PCB has been extended to a full size form factor in order to have space to put on (U)SIM on the top side and microSD interface on the bottom side.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application uA/kFwiJI7CPoaB/+lgp2w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Option NV
Gaston Geenslaan 14
Leuven, 3001
Belgium
  Date of Grant: 01/05/2012

Application Dated: 01/05/2012
 
Attention: Jan Willems , Technical Coordinator Certification

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NCMOMO6717
Name of Grantee:  Option NV
Equipment Class: Digital Transmission System
Notes: WWAN RF Module GTM671 WFS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.146  
CC 15C 2422.0  -  2452.0 0.087  

Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Class II Permissive Change: The PCB has been extended to a full size form factor in order to have space to put on (U)SIM on the top side and microSD interface on the bottom side.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application thmyeFKh54Px8g5GFysmhw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 01/05/2012

Application Dated: 01/05/2012
Option NV
Gaston Geenslaan 14
Leuven, 3001
Belgium
 
Attention: Jan Willems , Technical Coordinator Certification

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NCMOMO6717
Name of Grantee:  Option NV
Equipment Class: PCS Licensed Transmitter
Notes: WWAN RF Module GTM671 WFS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 22H 824.2  -  848.8 1.125 0.04  PM 244KGXW
CC 22H 824.2  -  848.8 0.356 0.05  PM 244KG7W
CC 22H 826.4  -  846.6 0.106 0.04  PM 4M14F9W
CC 24E 1850.2  -  1909.8 0.979 0.03  PM 248KGXW
CC 24E 1850.2  -  1909.8 0.508 0.03  PM 244KG7W
CC 24E 1852.4  -  1907.6 0.262 0.03  PM 4M16F9W

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Class II Permissive Change: The PCB has been extended to a full size form factor in order to have space to put on (U)SIM on the top side and microSD interface on the bottom side.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application thmyeFKh54Px8g5GFysmhw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Option NV
Gaston Geenslaan 14
Leuven, 3001
Belgium
  Date of Grant: 01/05/2012

Application Dated: 01/05/2012
 
Attention: Jan Willems , Technical Coordinator Certification

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NCMOMO6717
Name of Grantee:  Option NV
Equipment Class: PCS Licensed Transmitter
Notes: WWAN RF Module GTM671 WFS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 22H 824.2  -  848.8 1.125 0.04  PM 244KGXW
CC 22H 824.2  -  848.8 0.356 0.05  PM 244KG7W
CC 22H 826.4  -  846.6 0.106 0.04  PM 4M14F9W
CC 24E 1850.2  -  1909.8 0.979 0.03  PM 248KGXW
CC 24E 1850.2  -  1909.8 0.508 0.03  PM 244KG7W
CC 24E 1852.4  -  1907.6 0.262 0.03  PM 4M16F9W

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Class II Permissive Change: The PCB has been extended to a full size form factor in order to have space to put on (U)SIM on the top side and microSD interface on the bottom side.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application sa6KHQ4Zdo/jgL5i+h8dAg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 12/30/2011

Application Dated: 12/30/2011
Option NV
Gaston Geenslaan 14
Leuven, 3001
Belgium
 
Attention: Jan Willems , Technical Coordinator Certification

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NCMOMO6717
Name of Grantee:  Option NV
Equipment Class: Digital Transmission System
Notes: WWAN RF Module GTM671 WFS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.146  
CC 15C 2422.0  -  2452.0 0.087  

Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application sa6KHQ4Zdo/jgL5i+h8dAg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Option NV
Gaston Geenslaan 14
Leuven, 3001
Belgium
  Date of Grant: 12/30/2011

Application Dated: 12/30/2011
 
Attention: Jan Willems , Technical Coordinator Certification

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NCMOMO6717
Name of Grantee:  Option NV
Equipment Class: Digital Transmission System
Notes: WWAN RF Module GTM671 WFS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.146  
CC 15C 2422.0  -  2452.0 0.087  

Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application mJ31NucItxKCAI5KKzMdNA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 01/05/2012

Application Dated: 01/05/2012
Option NV
Gaston Geenslaan 14
Leuven, 3001
Belgium
 
Attention: Jan Willems , Technical Coordinator Certification

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NCMOMO6717
Name of Grantee:  Option NV
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: WWAN RF Module GTM671 WFS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 

Class II Permissive Change: The PCB has been extended to a full size form factor in order to have space to put on (U)SIM on the top side and microSD interface on the bottom side.

EAS Grant - Application mJ31NucItxKCAI5KKzMdNA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Option NV
Gaston Geenslaan 14
Leuven, 3001
Belgium
  Date of Grant: 01/05/2012

Application Dated: 01/05/2012
 
Attention: Jan Willems , Technical Coordinator Certification

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NCMOMO6717
Name of Grantee:  Option NV
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: WWAN RF Module GTM671 WFS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 

Class II Permissive Change: The PCB has been extended to a full size form factor in order to have space to put on (U)SIM on the top side and microSD interface on the bottom side.



TCB Grant - Application GY+4FPNuciT7joszBKNJ0A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 12/30/2011

Application Dated: 12/30/2011
Option NV
Gaston Geenslaan 14
Leuven, 3001
Belgium
 
Attention: Jan Willems , Technical Coordinator Certification

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NCMOMO6717
Name of Grantee:  Option NV
Equipment Class: PCS Licensed Transmitter
Notes: WWAN RF Module GTM671 WFS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 22H 824.2  -  848.8 1.125 0.04  PM 244KGXW
CC 22H 824.2  -  848.8 0.356 0.05  PM 244KG7W
CC 22H 826.4  -  846.6 0.106 0.04  PM 4M14F9W
CC 24E 1850.2  -  1909.8 0.979 0.03  PM 248KGXW
CC 24E 1850.2  -  1909.8 0.508 0.03  PM 244KG7W
CC 24E 1852.4  -  1907.6 0.262 0.03  PM 4M16F9W

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application GY+4FPNuciT7joszBKNJ0A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Option NV
Gaston Geenslaan 14
Leuven, 3001
Belgium
  Date of Grant: 12/30/2011

Application Dated: 12/30/2011
 
Attention: Jan Willems , Technical Coordinator Certification

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NCMOMO6717
Name of Grantee:  Option NV
Equipment Class: PCS Licensed Transmitter
Notes: WWAN RF Module GTM671 WFS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 22H 824.2  -  848.8 1.125 0.04  PM 244KGXW
CC 22H 824.2  -  848.8 0.356 0.05  PM 244KG7W
CC 22H 826.4  -  846.6 0.106 0.04  PM 4M14F9W
CC 24E 1850.2  -  1909.8 0.979 0.03  PM 248KGXW
CC 24E 1850.2  -  1909.8 0.508 0.03  PM 244KG7W
CC 24E 1852.4  -  1907.6 0.262 0.03  PM 4M16F9W

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: