FCC ID NDATX500XV

VHS 5W TRANSCEIVER

by Gold Apollo Co Ltd

Grantee Code: NDA   Product Code: TX500XV
Latest application date: 2007-11-20

FCC ID Device Details

FCC IDNDATX500XV
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeNDA
Product CodeTX500XV
Applicant BusinessGold Apollo Co Ltd 🇹🇼
Related Domains gapollo.com.tw
Equipment ClassVHS 5W TRANSCEIVER
Test FirmTraining Research Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
150-174 MHzOriginal Equipment2007-11-20

Exhibits

DocumentTypeAvailableFile
USERS MANUALUsers Manual2008-01-04PDF 1.1 MB
INTERNAL PHOTOSInternal Photos2008-01-04PDF 1.5 MB
EXTERNAL PHOTOSExternal Photos2008-01-04PDF 411 KB
LABEL LACATION AND SAMPLEID Label/Location Info2007-11-20PDF 131.2 KB
TEST SETUP PHOTOSTest Setup Photos2008-01-04PDF 147.4 KB
TEST REPORTTest Report2007-11-20PDF 1.5 MB
CONFIDENTIAL LETTERCover Letter(s)2007-11-20PDF 44.5 KB
TUNE UP PROCEDUREParts List/Tune Up Info2007-11-20PDF 242.9 KB

Application Information

Application IDoDP4BXBSDU5/fFbBNN8FkQ==
Final Action Date2007-11-20
Application PurposeOriginal Equipment
Applicant FRN0005099288
ModelTX500XV
Frequency Range150-174 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionVHS 5W TRANSCEIVER
Responsible PartyTommy Lin, Manager, tommy-lin@gapollo.com.tw , 886 226988888
Test FirmJack Tsai, Training Research Co., Ltd., jack@trclab.com.tw , 886-2-26935155
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term ConfidentialityNo
Short-Term Confidentiality Date01/04/2008
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is Conducted. Max Conducted Output Power is 6.4 W and 1.7 W respectively. This device is restricted to work related operations in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance

Applications

Application IDDatePurpose
oDP4BXBSDU5/fFbBNN8FkQ==2007-11-20Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
150-174 MHz52.5ppm9K00F3E9
150-174 MHz12.5ppm9K00F3E9
150-174 MHz52.5ppm6K20F1D9
150-174 MHz12.5ppm6K20F1D9
150-174 MHz52.5ppm11K2F1D968, 71, 80, 82
150-174 MHz12.5ppm11K2F1D9

Grants

TCB Grant - Application oDP4BXBSDU5/fFbBNN8FkQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 11/20/2007

Application Dated: 11/16/2007
Gold Apollo Co Ltd
Rm 1, 3th Fl., No. 77 Sec 1
Hsin Tai Wu Rd, Hsi-Chih Dist
New Taipei city, 221
Taiwan
 
Attention: Tommy Lin , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NDATX500XV
Name of Grantee:  Gold Apollo Co Ltd
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: VHS 5W TRANSCEIVER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 150.0  -  174.0 5.0 2.5  PM 9K00F3E
90 150.0  -  174.0 1.0 2.5  PM 9K00F3E
90 150.0  -  174.0 5.0 2.5  PM 6K20F1D
90 150.0  -  174.0 1.0 2.5  PM 6K20F1D
68 71 80 82 90 150.0  -  174.0 5.0 2.5  PM 11K2F1D
90 150.0  -  174.0 1.0 2.5  PM 11K2F1D

Power listed is Conducted. Max Conducted Output Power is 6.4 W and 1.7 W respectively. This device is restricted to work related operations in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance

68: This grant does not pertain to equipment approval requirements under Part 68.
71: This grant is issued under waiver of Section 15.7 of the Rules. It becomes invalid for units manufactured after the expiration date of that waiver.
80: Grant issued under waiver for measurements above 1000 MHz, measurement procedure MP1 and Sections 15.201-15.215 of the FCC Rules. Measurements were made using T-7001 and Section 15.184 applies.
82: Grant issued under waiver for measurements above 1000 MHz.

EAS Grant - Application oDP4BXBSDU5/fFbBNN8FkQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Gold Apollo Co Ltd
Rm 1, 3th Fl., No. 77 Sec 1 Hsin Tai Wu Rd, Hsi-Chih Dist
New Taipei city, 221
Taiwan
  Date of Grant: 11/20/2007

Application Dated: 11/16/2007
 
Attention: Tommy Lin , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NDATX500XV
Name of Grantee:  Gold Apollo Co Ltd
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: VHS 5W TRANSCEIVER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 150.0  -  174.0 5.0 2.5  PM 9K00F3E
90 150.0  -  174.0 1.0 2.5  PM 9K00F3E
90 150.0  -  174.0 5.0 2.5  PM 6K20F1D
90 150.0  -  174.0 1.0 2.5  PM 6K20F1D
68 71 80 82 90 150.0  -  174.0 5.0 2.5  PM 11K2F1D
90 150.0  -  174.0 1.0 2.5  PM 11K2F1D

Power listed is Conducted. Max Conducted Output Power is 6.4 W and 1.7 W respectively. This device is restricted to work related operations in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance


68: This grant does not pertain to equipment approval requirements under Part 68.
71: This grant is issued under waiver of Section 15.7 of the Rules. It becomes invalid for units manufactured after the expiration date of that waiver.
80: Grant issued under waiver for measurements above 1000 MHz, measurement procedure MP1 and Sections 15.201-15.215 of the FCC Rules. Measurements were made using T-7001 and Section 15.184 applies.
82: Grant issued under waiver for measurements above 1000 MHz.

Mail To: