FCC ID NDXDMO1

Datamars DMO1 SMT Radio Module

by Datamars SA

Grantee Code: NDX   Product Code: DMO1
Latest application date: 2022-04-18

FCC ID Device Details

FCC IDNDXDMO1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeNDX
Product CodeDMO1
Applicant BusinessDatamars SA 🇨🇭
Related Domains datamars.com
Equipment ClassDatamars DMO1 SMT Radio Module
Test FirmEMC Technologies (NZ) Ltd

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2022-04-18

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2022-04-18PDF 1 MB
Internal PhotosInternal Photos2022-04-18PDF 617.3 KB
External PhotosExternal Photos2022-04-18PDF 227.2 KB
Label InformationID Label/Location Info2022-04-18PDF 310.3 KB
Test Setup PhotosTest Setup Photos2022-04-18PDF 1,015 KB
Test ReportTest Report2022-04-18PDF 1.3 MB
Confidentiality LetterCover Letter(s)2022-04-18PDF 152.9 KB
Limited Modular Approval LetterCover Letter(s)2022-04-18PDF 187.3 KB
POA LetterCover Letter(s)2022-04-18PDF 152.1 KB
RF ExpRF Exposure Info2022-04-18PDF 474.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 121.2 KB
Schematics Metadata onlySchematicsPDF 478.7 KB
Operational Description Metadata onlyOperational DescriptionPDF 942.8 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 508.2 KB

Application Information

Application IDJXWo7xWqvQpALZMoUdMS5A==
Final Action Date2022-04-18
Application PurposeOriginal Equipment
Applicant FRN0009294984
ModelDMO1
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionDatamars DMO1 SMT Radio Module
Responsible PartyDamien Pachoud, CTO, damien.pachoud@datamars.com , 0041919357478
Test FirmAndrew Cutler, EMC Technologies (NZ) Ltd, aucklab@emctech.co.nz , +64 9 360-0862
TCB Emailtei@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Single Modular approval. The module will only be installed in Datamars SA products and is not for sale to third parties. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Applications

Application IDDatePurpose
JXWo7xWqvQpALZMoUdMS5A==2022-04-18Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.000500015C

Grants

TCB Grant - Application JXWo7xWqvQpALZMoUdMS5A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/18/2022

Application Dated: 04/18/2022
Datamars SA
Via Industria 16
Lamone, 6814
Switzerland
 
Attention: Damien Pachoud , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NDXDMO1
Name of Grantee:  Datamars SA
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Datamars DMO1 SMT Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0005  

Limited Single Modular approval. The module will only be installed in Datamars SA products and is not for sale to third parties. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

EAS Grant - Application JXWo7xWqvQpALZMoUdMS5A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Datamars SA
Via Industria 16
Lamone, 6814
Switzerland
  Date of Grant: 04/18/2022

Application Dated: 04/18/2022
 
Attention: Damien Pachoud , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NDXDMO1
Name of Grantee:  Datamars SA
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Datamars DMO1 SMT Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0005  

Limited Single Modular approval. The module will only be installed in Datamars SA products and is not for sale to third parties. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.



Mail To: