FCC ID NI3-2511BG2PLUS

Point-to-Point Wireless Outdoor Bridge

by Senao International Co Ltd

Grantee Code: NI3   Product Code: 2511BG2PLUS
Latest application date: 2003-02-07

FCC ID Device Details

FCC IDNI3-2511BG2PLUS
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeNI3
Product Code2511BG2PLUS
Applicant BusinessSenao International Co Ltd 🇹🇼
Related Domains senao.com.tw
Equipment ClassPoint-to-Point Wireless Outdoor Bridge
Test FirmElectronics Testing Center, Taiwan

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2003-02-07

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2003-02-07PDF 1.7 MB
Internal Photo 2 of 2Internal Photos2003-02-07PDF 2 MB
Internal photo 1 of 2Internal Photos2003-02-07PDF 2.5 MB
External PhotosExternal Photos2003-02-07PDF 505.7 KB
FCC ID label format and locationID Label/Location Info2003-02-07PDF 55.2 KB
Operational DescriptionOperational Description2003-02-07PDF 31.7 KB
Test Setup PhotosTest Setup Photos2003-02-07PDF 161.3 KB
Additional Test reportTest Report2003-02-07PDF 10.5 KB
Test ReportTest Report2003-02-07PDF 1.2 MB
Request for confidentiality letterCover Letter(s)2003-02-07PDF 35 KB
TCB Q and ACover Letter(s)2003-02-07PDF 40.1 KB
Antenna specificationParts List/Tune Up Info2003-02-07PDF 130.1 KB
MPE measurementRF Exposure Info2003-02-07PDF 392.7 KB

Application Information

Application IDzOHkdvhUglj2xcAnJe8NUg==
Final Action Date2003-02-07
Application PurposeOriginal Equipment
Applicant FRN0007846843
Model2511BG2PLUS
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionPoint-to-Point Wireless Outdoor Bridge
Responsible PartyHavin Lu, Director, havin.lu@senao.com.tw , 886 3 328 9289
Test FirmWinpo Tsai, Electronics Testing Center, Taiwan, wen.d@etc.org.tw , 886-3-3280026
TCB Emailmkuo@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. This device is limited to Point-to-Point operation with the type of antenna documented in this filing. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 1.5 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
zOHkdvhUglj2xcAnJe8NUg==2003-02-07Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.602000015CCE

Grants

TCB Grant - Application zOHkdvhUglj2xcAnJe8NUg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 02/07/2003

Application Dated: 02/07/2003
Senao International Co Ltd
No. 500, Fusing 3rd Rd., Hwa-Ya Technical Park,
Kuei-Shan Hsiang,
Taoyuan County, 333
Taiwan
 
Attention: Havin Lu , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NI3-2511BG2PLUS
Name of Grantee:  Senao International Co Ltd
Equipment Class: Digital Transmission System
Notes: Point-to-Point Wireless Outdoor Bridge
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.602  

Output power listed is conducted. This device is limited to Point-to-Point operation with the type of antenna documented in this filing. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 1.5 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application zOHkdvhUglj2xcAnJe8NUg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Senao International Co Ltd
No. 500, Fusing 3rd Rd., Hwa-Ya Technical Park, Kuei-Shan Hsiang,
Taoyuan County, 333
Taiwan
  Date of Grant: 02/07/2003

Application Dated: 02/07/2003
 
Attention: Havin Lu , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NI3-2511BG2PLUS
Name of Grantee:  Senao International Co Ltd
Equipment Class: Digital Transmission System
Notes: Point-to-Point Wireless Outdoor Bridge
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.602  

Output power listed is conducted. This device is limited to Point-to-Point operation with the type of antenna documented in this filing. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 1.5 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: