FCC ID NI3-AT53V321

IEEE802.11a+802.11g DualBand Wireless Access Point

by Senao International Co Ltd

Grantee Code: NI3   Product Code: AT53V321
Latest application date: 2003-09-19

FCC ID Device Details

FCC IDNI3-AT53V321
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeNI3
Product CodeAT53V321
Applicant BusinessSenao International Co Ltd 🇹🇼
Related Domains senao.com.tw
Equipment ClassIEEE802.11a+802.11g DualBand Wireless Access Point
Test FirmBureau Veritas CPS (H.K.) Ltd. Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2003-09-19
2412-2462 MHzOriginal Equipment2003-09-19

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2003-09-19PDF 1.9 MB
Internal PhotosInternal Photos2003-09-19PDF 790.3 KB
External PhotosExternal Photos2003-09-19PDF 402.2 KB
Label LocationID Label/Location Info2003-09-19PDF 62.8 KB
Label SampleID Label/Location Info2003-09-19PDF 40.3 KB
DescriptionOperational Description2003-09-19PDF 56 KB
Test Setup PhotosTest Setup Photos2003-09-19PDF 470.5 KB
Test ReportTest Report2003-09-19PDF 1.8 MB
ConfidentialityCover Letter(s)2003-09-19PDF 43.1 KB
DoCCover Letter(s)2003-09-19PDF 45.5 KB
POACover Letter(s)2003-09-19PDF 38.6 KB
RF Exposure InfoRF Exposure Info2003-09-19PDF 93.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 15 KB
Schematics Metadata onlySchematicsPDF 244.3 KB

Application Information

Application IDCSykTJxj3rr0EECZmomYWg==
Final Action Date2003-09-19
Application PurposeOriginal Equipment
Applicant FRN0007846843
ModelAT53V321
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionIEEE802.11a+802.11g DualBand Wireless Access Point
Responsible PartyHavin Lu, Director, havin.lu@senao.com.tw , 886 3 328 9289
Technical ContactEllis Wu, Advance Data Technology Corp., ellis@adt.com.tw , +886-3-327-0910
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com , 886-2-2605-2180-3
TCB Emailhotline@americanTCB.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The 5210-5290 and 5760-5800 MHz bands specified are for Turbo Mode of Operation.

Applications

Application IDDatePurpose
CSykTJxj3rr0EECZmomYWg==2003-09-19Original Equipment
05zlxTgobvEWuYUwyCAueQ==2003-09-19Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.097000015CCC, CE
5180-5240 MHz0.03815ECC, CE
5210-5290 MHz0.0415ECC, CE
5260-5320 MHz0.09615ECC, CE
5745-5805 MHz0.08415ECC, CE
5760-5800 MHz0.03115ECC, CE

Grants

TCB Grant - Application CSykTJxj3rr0EECZmomYWg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/19/2003

Application Dated: 09/19/2003
Senao International Co Ltd
No. 500, Fusing 3rd Rd., Hwa-Ya Technical Park,
Kuei-Shan Hsiang,
Taoyuan County, 333
Taiwan
 
Attention: Havin Lu , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NI3-AT53V321
Name of Grantee:  Senao International Co Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE802.11a+802.11g DualBand Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15E 5180.0  -  5240.0 0.038  
CC CE 15E 5260.0  -  5320.0 0.096  
CC CE 15E 5745.0  -  5805.0 0.084  
CC CE 15E 5210.0  -  5290.0 0.04  
CC CE 15E 5760.0  -  5800.0 0.031  

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The 5210-5290 and 5760-5800 MHz bands specified are for Turbo Mode of Operation.

CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application CSykTJxj3rr0EECZmomYWg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Senao International Co Ltd
No. 500, Fusing 3rd Rd., Hwa-Ya Technical Park, Kuei-Shan Hsiang,
Taoyuan County, 333
Taiwan
  Date of Grant: 09/19/2003

Application Dated: 09/19/2003
 
Attention: Havin Lu , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NI3-AT53V321
Name of Grantee:  Senao International Co Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE802.11a+802.11g DualBand Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15E 5180.0  -  5240.0 0.038  
CC CE 15E 5260.0  -  5320.0 0.096  
CC CE 15E 5745.0  -  5805.0 0.084  
CC CE 15E 5210.0  -  5290.0 0.04  
CC CE 15E 5760.0  -  5800.0 0.031  

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The 5210-5290 and 5760-5800 MHz bands specified are for Turbo Mode of Operation.


CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application 05zlxTgobvEWuYUwyCAueQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/19/2003

Application Dated: 09/19/2003
Senao International Co Ltd
No. 500, Fusing 3rd Rd., Hwa-Ya Technical Park,
Kuei-Shan Hsiang,
Taoyuan County, 333
Taiwan
 
Attention: Havin Lu , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NI3-AT53V321
Name of Grantee:  Senao International Co Ltd
Equipment Class: Digital Transmission System
Notes: IEEE802.11a+802.11g DualBand Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15C 2412.0  -  2462.0 0.097  

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application 05zlxTgobvEWuYUwyCAueQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Senao International Co Ltd
No. 500, Fusing 3rd Rd., Hwa-Ya Technical Park, Kuei-Shan Hsiang,
Taoyuan County, 333
Taiwan
  Date of Grant: 09/19/2003

Application Dated: 09/19/2003
 
Attention: Havin Lu , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NI3-AT53V321
Name of Grantee:  Senao International Co Ltd
Equipment Class: Digital Transmission System
Notes: IEEE802.11a+802.11g DualBand Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC CE 15C 2412.0  -  2462.0 0.097  

Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: