FCC ID NI8OM900
900MHz FREQUENCY HOPPING SPREAD SPECTRUM RF MODULE
by Schneider Electric Systems Canada Inc.
Grantee Code: NI8 Product Code: OM900
Latest application date: 2019-12-12
FCC ID Device Details
| FCC ID | NI8OM900 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | NI8 |
| Product Code | OM900 |
| Applicant Business | Schneider Electric Systems Canada Inc. 🇨🇦 |
| Related Domains |  schneider-electric.com |
| Equipment Class | 900MHz FREQUENCY HOPPING SPREAD SPECTRUM RF MODULE |
| Test Firm | EMC Bayswater Pty Ltd |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.394-927.606 MHz | Class II permissive change or modification of presently authorized equipment | 2019-12-12 |
| 902.394-927.606 MHz | Class II permissive change or modification of presently authorized equipment | 2012-08-03 |
| 902.394-927.606 MHz | Original Equipment | 2007-07-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| USERS MANUAL | Users Manual | 2007-07-25 | PDF 1 MB |
| Internal Photos | Internal Photos | 2019-12-12 | PDF 911 KB |
| INTERNAL PHOTOS | Internal Photos | 2012-08-03 | PDF 391.4 KB |
| ADDITIONAL INTERNAL PHOTOS | Internal Photos | 2007-07-25 | PDF 255 KB |
| INTERNAL VIEW | Internal Photos | 2007-07-25 | PDF 984 KB |
| EXTERNAL PHOTOS | External Photos | 2012-08-03 | PDF 157.6 KB |
| EXTERNAL PHOTOS | External Photos | 2007-07-25 | PDF 178.3 KB |
| LABEL DETAILS | ID Label/Location Info | 2012-08-03 | PDF 240.7 KB |
| LABEL DETAILS | ID Label/Location Info | 2007-07-25 | PDF 231.7 KB |
| RADIATED EMISSIONS PHOTOS | Schematics | 2012-08-03 | PDF 429 KB |
| ANTENNA SPECIFICATION | Operational Description | 2012-08-03 | PDF 2.5 MB |
| Test Setup Photos | Test Setup Photos | 2019-12-12 | PDF 2.7 MB |
| TEST SETUP | Test Setup Photos | 2007-07-25 | PDF 518.5 KB |
| Test Report | Test Report | 2019-12-12 | PDF 5.4 MB |
| RAD HAZ ASSESSMENT | Test Report | 2012-08-03 | PDF 13.3 KB |
| TEST REPORT | Test Report | 2012-08-03 | PDF 1.2 MB |
| EIRP CALCULATIONS | Test Report | 2007-07-25 | PDF 4.9 KB |
| TEST REPORT | Test Report | 2007-07-25 | PDF 1.1 MB |
| Test Lab Attestation Letter | Attestation Statements | 2019-12-12 | PDF 142 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2019-12-12 | PDF 37.5 KB |
| Confidential Request Letter | Cover Letter(s) | 2019-12-12 | PDF 43.7 KB |
| Modular Approval Cover Letter | Cover Letter(s) | 2019-12-12 | PDF 195.4 KB |
| AUTHORIZATION LETTER | Cover Letter(s) | 2012-08-03 | PDF 98.9 KB |
| CONFIDENTIALITY LETTER | Cover Letter(s) | 2012-08-03 | PDF 101.7 KB |
| COVER LETTER | Cover Letter(s) | 2012-08-03 | PDF 99.5 KB |
| CONFIDENTIALITY LETTER | Cover Letter(s) | 2007-07-25 | PDF 276.5 KB |
| MODULAR APPROVAL LETTER | Cover Letter(s) | 2007-07-25 | PDF 82.4 KB |
| RADIO FREQUENCY HAZARD ASSESMENT | RF Exposure Info | 2007-07-25 | PDF 91.1 KB |
| Block Diagram Metadata only | Block Diagram | PDF 153.7 KB | |
| Schematic - PAsch Metadata only | Schematics | PDF 92.7 KB | |
| Schematic 194-00-0100-J2(O-Series 900MHz Module) Metadata only | Schematics | PDF 2 MB | |
| Schematics Metadata only | Schematics | PDF 2 MB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 103.4 KB |
Application Information
| Application ID | kuh7EECjOsDBUGlLXLdskA== |
|---|---|
| Final Action Date | 2019-12-12 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0021927082 |
| Model | OM900 |
| Frequency Range | 902.394-927.606 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 900MHz FREQUENCY HOPPING SPREAD SPECTRUM RF MODULE |
| Responsible Party | Michael Gafanovitch, Mr, michael.gafanovitch@schneider-electric.com , 613-591-1943 |
| Test Firm | Neville Liyanapatabendige, EMC Bayswater Pty Ltd, neville@emcbayswater.com.au  , 61397615888 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. Professional installation is required. Modular approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and professional installers must be provided with antenna installation instructions. OEM integrators, professional installers, and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Final antenna installation and operating configurations of this transmitter including antenna gain and minimum cable loss must not exceed the EIRP of the configuration used for MPE compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| kuh7EECjOsDBUGlLXLdskA== | 2019-12-12 | Class II permissive change or modification of presently authorized equipment |
| GDd+/OCx5dJlqzDdL3hpvg== | 2012-08-03 | Class II permissive change or modification of presently authorized equipment |
| 4PgXZE70KuGKNxoL3Yzw2w== | 2007-07-25 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.394-927.606 MHz | 1.0000000 | 15C |
Grants
TCB Grant - Application kuh7EECjOsDBUGlLXLdskA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/12/2019 Application Dated: 12/12/2019 |
| Schneider Electric Systems Canada Inc. |
| 415 Legget Drive |
| Kanata |
| Ontario, K2K3R1 Canada |
| Attention: Michael Gafanovitch , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NI8OM900 |
| Name of Grantee: | Schneider Electric Systems Canada Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900MHz FREQUENCY HOPPING SPREAD SPECTRUM RF MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.394 - 927.606 | 1.0 |
| Power listed is conducted. Professional installation is required. Modular approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and professional installers must be provided with antenna installation instructions. OEM integrators, professional installers, and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Final antenna installation and operating configurations of this transmitter including antenna gain and minimum cable loss must not exceed the EIRP of the configuration used for MPE compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application kuh7EECjOsDBUGlLXLdskA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Schneider Electric Systems Canada Inc. 415 Legget Drive Kanata Ontario, K2K3R1 Canada |
Date of Grant: 12/12/2019 Application Dated: 12/12/2019 |
| Attention: Michael Gafanovitch , Mr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NI8OM900 |
| Name of Grantee: | Schneider Electric Systems Canada Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900MHz FREQUENCY HOPPING SPREAD SPECTRUM RF MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.394 - 927.606 | 1.0 |
| Power listed is conducted. Professional installation is required. Modular approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and professional installers must be provided with antenna installation instructions. OEM integrators, professional installers, and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Final antenna installation and operating configurations of this transmitter including antenna gain and minimum cable loss must not exceed the EIRP of the configuration used for MPE compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 08/03/2012 Application Dated: 08/03/2012 |
| Trio Datacom Pty Ltd (a wholly owned company of Schneider Electric) |
| 41 Aster Avenue |
| Carrum Downs 3201, Australia |
| Attention: David Rowntree , Senior Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NI8OM900 |
| Name of Grantee: | Trio Datacom Pty Ltd (a wholly owned company of Schneider Electric) |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900 MHz FREQUENCY HOPPING SPREAD SPECTRUM RF MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.394 - 927.606 | 1.0 |
| Power listed is conducted. Professional installation is required. Modular approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and professional installers must be provided with antenna installation instructions. OEM integrators, professional installers, and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Final antenna installation and operating configurations of this transmitter including antenna gain and minimum cable loss must not exceed the EIRP of the configuration used for MPE compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. (Date: 07/25/2007) Class II Change: This Class II Change incorporates an alternate PA Chip Integrated Circuit. |
EAS Grant - Application GDd+/OCx5dJlqzDdL3hpvg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Trio Datacom Pty Ltd (a wholly owned company of Schneider Electric) 41 Aster Avenue Carrum Downs 3201, Australia |
Date of Grant: 08/03/2012 Application Dated: 08/03/2012 |
| Attention: David Rowntree , Senior Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NI8OM900 |
| Name of Grantee: | Trio Datacom Pty Ltd (a wholly owned company of Schneider Electric) |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900 MHz FREQUENCY HOPPING SPREAD SPECTRUM RF MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.394 - 927.606 | 1.0 |
| Power listed is conducted. Professional installation is required. Modular approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and professional installers must be provided with antenna installation instructions. OEM integrators, professional installers, and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Final antenna installation and operating configurations of this transmitter including antenna gain and minimum cable loss must not exceed the EIRP of the configuration used for MPE compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. (Date: 07/25/2007) Class II Change: This Class II Change incorporates an alternate PA Chip Integrated Circuit. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 | Date of Grant: 07/25/2007 Application Dated: 07/23/2007 |
| Trio Datacom Pty Ltd (a wholly owned company of Schneider Electric) |
| 41 Aster Avenue |
| Carrum Downs 3201, Australia |
| Attention: David Rowntree , Senior Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NI8OM900 |
| Name of Grantee: | Trio Datacom Pty Ltd (a wholly owned company of Schneider Electric) |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900MHz FREQUENCY HOPPING SPREAD SPECTRUM RF MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.394 - 927.606 | 1.0 |
| Power listed is conducted. Professional installation is required. Modular approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and professional installers must be provided with antenna installation instructions. OEM integrators, professional installers, and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Final antenna installation and operating configurations of this transmitter including antenna gain and minimum cable loss must not exceed the EIRP of the configuration used for MPE compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application 4PgXZE70KuGKNxoL3Yzw2w==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Trio Datacom Pty Ltd (a wholly owned company of Schneider Electric) 41 Aster Avenue Carrum Downs 3201, Australia | Date of Grant: 07/25/2007 Application Dated: 07/23/2007 |
| Attention: David Rowntree , Senior Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | NI8OM900 |
| Name of Grantee: | Trio Datacom Pty Ltd (a wholly owned company of Schneider Electric) |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900MHz FREQUENCY HOPPING SPREAD SPECTRUM RF MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.394 - 927.606 | 1.0 |
| Power listed is conducted. Professional installation is required. Modular approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and professional installers must be provided with antenna installation instructions. OEM integrators, professional installers, and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Final antenna installation and operating configurations of this transmitter including antenna gain and minimum cable loss must not exceed the EIRP of the configuration used for MPE compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
|
| Mail To: |
| EA793539 |