FCC ID NI8QR450

UHF Remote Data Radio

by Schneider Electric Systems Canada Inc.

Grantee Code: NI8   Product Code: QR450
Latest application date: 2015-03-10

FCC ID Device Details

FCC IDNI8QR450
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeNI8
Product CodeQR450
Applicant BusinessSchneider Electric Systems Canada Inc. 🇨🇦
Related Domains schneider-electric.com
Equipment ClassUHF Remote Data Radio
Test FirmEMC Technologies NZ Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
421-512 MHzClass II permissive change or modification of presently authorized equipment2015-03-10
421-512 MHzOriginal Equipment2014-12-05

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2014-12-05PDF 4.5 MB
Users ManualUsers Manual2014-12-05PDF 4.5 MB
Internal PhotosInternal Photos2014-12-05PDF 936.6 KB
External PhotosExternal Photos2014-12-05PDF 268.7 KB
External PhotosExternal Photos2014-12-05PDF 297.5 KB
Label InfoID Label/Location Info2014-12-05PDF 194.6 KB
Label InfoID Label/Location Info2014-12-05PDF 165.6 KB
Test Setup PhotosTest Setup Photos2014-12-05PDF 386.2 KB
Test Setup PhotosTest Setup Photos2014-12-05PDF 253.5 KB
Test ReportTest Report2015-03-10PDF 1.1 MB
Test ReportTest Report2014-12-05PDF 780.7 KB
Test ReportTest Report2014-12-05PDF 786.2 KB
Attestation LetterCover Letter(s)2015-03-10PDF 60.1 KB
Authorization LetterCover Letter(s)2015-03-10PDF 29.5 KB
Class II Change Cover LetterCover Letter(s)2015-03-10PDF 33.5 KB
Confidentiality LetterCover Letter(s)2014-12-05PDF 27.1 KB
Cover LetterCover Letter(s)2014-12-05PDF 137.1 KB
Extended Frequency JustificationCover Letter(s)2014-12-05PDF 31.3 KB
RF ExposureRF Exposure Info2014-12-05PDF 145.3 KB
Tune Up ProcedureParts List/Tune Up Info2014-12-05PDF 37.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 63.6 KB
Schematics Metadata onlySchematicsPDF 2.9 MB
Operational Description Metadata onlyOperational DescriptionPDF 26.2 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 147.1 KB

Application Information

Application IDq6wBzHAOqNl1RHg5i/1stg==
Final Action Date2015-03-10
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0021927082
ModelQR450
Frequency Range421-512 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionUHF Remote Data Radio
Responsible PartyMichael Gafanovitch, Mr, michael.gafanovitch@schneider-electric.com , 613-591-1943
Test FirmAndrew Cutler, EMC Technologies NZ Ltd., auklab@ihug.co.nz , 64-9-360-0862
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). Users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of § 1.1307(b)(3), for satisfying RF exposure compliance. (Date of Grant: 12/05/2014) Class II Permissive Change: This Class II permissive Change is to add additional emission designators.

Applications

Application IDDatePurpose
q6wBzHAOqNl1RHg5i/1stg==2015-03-10Class II permissive change or modification of presently authorized equipment
yJgoKJWBPKZDhidMEvNZbg==2014-12-05Original Equipment
QPC0cQTs8bRPpKyMIlhYHA==2014-12-05Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
421-512 MHz100.48ppm11K2F1D9EF, ES
421-512 MHz10.00000000.4800000000ppm11K2F1D90EF
421-512 MHz100.48ppm9K60F1D9EF, ES
421-512 MHz100.48ppm20K0F1D9EF, ES

Grants

TCB Grant - Application yJgoKJWBPKZDhidMEvNZbg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/05/2014

Application Dated: 12/05/2014
Schneider Electric Systems Canada Inc.
415 Legget Drive
Kanata
Ontario, K2K3R1
Canada
 
Attention: Michael Gafanovitch , Mr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NI8QR450
Name of Grantee:  Schneider Electric Systems Canada Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: UHF Remote Data Radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF 90 421.0  -  512.0 10.0 0.48  PM 11K2F1D

Power listed is conducted. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). Users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of § 1.1307(b)(3), for satisfying RF exposure compliance.

EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application yJgoKJWBPKZDhidMEvNZbg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Schneider Electric Systems Canada Inc.
415 Legget Drive Kanata
Ontario, K2K3R1
Canada
  Date of Grant: 12/05/2014

Application Dated: 12/05/2014
 
Attention: Michael Gafanovitch , Mr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NI8QR450
Name of Grantee:  Schneider Electric Systems Canada Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: UHF Remote Data Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF 90 421.0  -  512.0 10.0 0.48  PM 11K2F1D

Power listed is conducted. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). Users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of § 1.1307(b)(3), for satisfying RF exposure compliance.


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application QPC0cQTs8bRPpKyMIlhYHA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/05/2014

Application Dated: 12/05/2014
Schneider Electric Systems Canada Inc.
415 Legget Drive
Kanata
Ontario, K2K3R1
Canada
 
Attention: Michael Gafanovitch , Mr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NI8QR450
Name of Grantee:  Schneider Electric Systems Canada Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: UHF Remote Data Radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 


EAS Grant - Application QPC0cQTs8bRPpKyMIlhYHA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Schneider Electric Systems Canada Inc.
415 Legget Drive Kanata
Ontario, K2K3R1
Canada
  Date of Grant: 12/05/2014

Application Dated: 12/05/2014
 
Attention: Michael Gafanovitch , Mr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NI8QR450
Name of Grantee:  Schneider Electric Systems Canada Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: UHF Remote Data Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 



TCB Grant - Application q6wBzHAOqNl1RHg5i/1stg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 03/10/2015

Application Dated: 03/10/2015
Schneider Electric Systems Canada Inc.
415 Legget Drive
Kanata
Ontario, K2K3R1
Canada
 
Attention: Michael Gafanovitch , Mr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NI8QR450
Name of Grantee:  Schneider Electric Systems Canada Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: UHF Remote Data Radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF ES 90 421.0  -  512.0 10.0 0.48  PM 11K2F1D
EF ES 90 421.0  -  512.0 10.0 0.48  PM 9K60F1D
EF ES 90 421.0  -  512.0 10.0 0.48  PM 20K0F1D

Power listed is conducted. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). Users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of § 1.1307(b)(3), for satisfying RF exposure compliance. (Date of Grant: 12/05/2014)

Class II Permissive Change: This Class II permissive Change is to add additional emission designators.


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

EAS Grant - Application q6wBzHAOqNl1RHg5i/1stg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Schneider Electric Systems Canada Inc.
415 Legget Drive Kanata
Ontario, K2K3R1
Canada
  Date of Grant: 03/10/2015

Application Dated: 03/10/2015
 
Attention: Michael Gafanovitch , Mr

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  NI8QR450
Name of Grantee:  Schneider Electric Systems Canada Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: UHF Remote Data Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
EF ES 90 421.0  -  512.0 10.0 0.48  PM 11K2F1D
EF ES 90 421.0  -  512.0 10.0 0.48  PM 9K60F1D
EF ES 90 421.0  -  512.0 10.0 0.48  PM 20K0F1D

Power listed is conducted. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). Users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of § 1.1307(b)(3), for satisfying RF exposure compliance. (Date of Grant: 12/05/2014)

Class II Permissive Change: This Class II permissive Change is to add additional emission designators.


EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.
ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth.

Mail To: